UNT Libraries Government Documents Department - 414 Matching Results

Search Results

open access

Aerodynamic and hydrodynamic characteristics of a proposed supersonic multijet water-based hydro-ski aircraft with a variable-incidence wing

Description: From Introduction: "The configuration described in this paper represents one approach to such an airplane and the results of the wind-tunnel and tank evaluations are presented. In the present investigation, the aerodynamic longitudinal characteristics over a Mach number range from 0.6 to 1.97 were obtained."
Date: October 23, 1957
Creator: Petynia, William W.; Hasson, Dennis F. & Spooner, Stanley H.
open access

Aerodynamic Characteristics at a Mach Number of 1.38 of Four Wings of Aspect Ratio 4 Having Quarter-Chord Sweep Angles of 0 Degrees, 35 Degrees, 45 Degrees, and 60 Degrees

Description: Report discussing testing to determine the supersonic aerodynamic characteristics of four sweptback wings and wing-body configurations at several angles. Information about basic wing data, modifications to the 60 degree wing, the effects of sweep, and effects of fuselage are included.
Date: October 10, 1950
Creator: Kemp, William B., Jr.; Goodson, Kenneth W. & Booth, Robert A.
open access

Aerodynamic characteristics at high speeds of a two-blade NACA 10-(3)(062)-045 propeller and of a two-blade NACA 10-(3)(08)-045 propeller

Description: From Introduction: "The aerodynamic characteristics of a series of 10-foot-diameter propellers are being investigated in the Langley 16-foot high-speed tunnel in a comprehensive propeller research program. Using high-critical-speed NACA 16-series airfoil sections (reference 1), these propellers are designed to have Betz minimum induced-energy loss loading (reference 2) for a blade angle of 45^o at the 0.7 radius, when used as a four-blade propeller operating at an advance ratio of approximately… more
Date: October 1, 1948
Creator: Solomon, William
open access

Aerodynamic characteristics at high speeds of full-scale propellers having Clark Y blade sections

Description: From Introduction: "The single purpose of this paper is to make available the data obtained from tests of these two Clark Y section propellers as quickly as possible with no attempt being made to analyze the results or to compare them with other high-speed-propeller test results."
Date: October 26, 1948
Creator: Johnson, Peter J.
open access

Aerodynamic characteristics in pitch of a series of cruciform-wing missiles with canard controls at a Mach number of 2.01

Description: From Introduction: "This paper presents the results of tests made at a Mach number of 2.01 to determine the effect of body length on the longitudinal characteristics (zero roll angle) for five complete configurations as well as for the bodies alone, the bodies plus wings, and the bodies plus canard surfaces. The experimental results are compared with some simple theoretical estimates."
Date: October 30, 1953
Creator: Spearman, M. Leroy
open access

Aerodynamic characteristics of a wing with unswept quarter-chord line, aspect ratio 4, taper ratio 0.6, and NACA 65A006 airfoil section

Description: From Introduction: "This paper presents the results of the investigation of the wing-alone and of the wing-fuselage configuration employing a wing with an unswept quarter-chord line, aspect ratio 4, taper ratio 0.6, and an NACA 65A006 airfoil section parallel to the air stream. The results of closely related sweptback-wing investigations, which are part of the present transonic programs, are presented in references 1 to 3."
Date: October 21, 1949
Creator: Goodson, Kenneth W. & Morrison, William D., Jr.
open access

Aerodynamic Characteristics of Two All-Movable Wings Tested in the Presence of a Fuselage at a Mach Number of 1.9

Description: Report presenting testing of half-span models of two wings of different plan form as both all-movable and fixed surfaces in the presence of a half fuselage. All-movable surfaces are being considered for supersonic aircraft as possible angle-of-attack indicators, control surfaces, and all-movable wings. Results regarding the lift characteristics, center of pressure, and drag of the wings are provided.
Date: October 28, 1948
Creator: Conner, D. William
open access

Aerodynamic study of a wing-fuselage combination employing a wing swept back 63 degrees: Aerodynamic characteristics in sideslip of a large-scale model having a 63 degree swept-back vertical tail

Description: Report presenting an investigation to determine the effects of a vertical tail with the leading edge swept back 63 degrees on the aerodynamic characteristics of a wing-fuselage combination with a wing with the leading edge swept back 63 degrees. The aerodynamic characteristics in sideslip with and without the vertical tail are also presented. Results regarding the directional stability, rudder effectiveness, and rudder hinge moments are described.
Date: October 7, 1949
Creator: McCormack, Gerald M.
open access

Aerodynamic study of a wing-fuselage combination employing a wing swept back 63 degrees: effect of Reynolds number at supersonic Mach numbers on the longitudinal characteristics of a wing twisted and cambered for uniform load

Description: Report presenting a wind-tunnel investigation of the longitudinal characteristics of a wing-body combination with a wing with leading edge swept back 63 degrees. Lift, drag, and pitching-moment measurements were made over a range of Mach and Reynolds numbers. Results regarding the general characteristics and effect of Reynolds number are provided.
Date: October 9, 1950
Creator: Heitmeyer, John C.
open access

Aerodynamic study of a wing-fuselage combination employing a wing swept back 63 degrees: Subsonic Mach and Reynolds number effects on the characteristics of the wing and on the effectiveness of an elevon

Description: Report presenting a wind-tunnel investigation of a semispan model of a wing swept back 63 degrees with an aspect ratio of 3.5 and a taper ratio of 0.25. The tests were conducted to evaluate the effects of Reynolds and Mach number on the aerodynamic characteristics of the wing. Results regarding the characteristics of the wing with the elevon undeflected, effectiveness of the elevon, effects of roughness strips, and effect of model deflection under varying loads are provided.
Date: October 11, 1948
Creator: Reynolds, Robert M. & Smith, Donald W.
open access

Aeronautical Characteristics of a Three-Blade Propeller Having NACA 10-(3)(08)-03 Blades

Description: "Data obtained in tests of a 10-foot diameter, three-blade propeller, having NACA 10-(3)(08)-03 blades, conducted in the Langley 16-foot high-speed tunnel are presented. The propeller performance quantities related by the tests are thrust, torque, efficiency, and advance ratio for various rotational speeds or stream Mach numbers with blade angle as a parameter. Advance Mach numbers varied from 0.12 to 0.64" (p. 1).
Date: October 29, 1948
Creator: Davidson, Robert E.
open access

Air-flow characteristics of brazed and rolled wire filter cloth for transpiration-cooled afterburners

Description: From Introduction: "Because of variation in the static-pressure drop across the porous material and in the cooling air required along the length of afterburner combustion chambers, a prescribed distribution of permeability is usually necessary. However, as a preliminary investigation, this report is concerned only with the attainment of uniform permeability. The results of an experimental investigation, conducted at the NACA Lewis laboratory, to determine the permeabilities of five thick meshes… more
Date: October 26, 1953
Creator: Koffel, William K.
open access

Altitude-Chamber Performance of British Rolls-Royce Nene II Engine 2: 18.41-Inch-Diameter Jet Nozzle

Description: Report presenting an altitude-chamber investigation to determine the altitude performance characteristics of the British Rolls-Royce Nene II turbojet engine with an 18.41-inch-diameter jet nozzles. Testing occurred at a range of simulated altitudes and ram-pressure ratios. Results regarding the simulated flight performance, generalized performance, and effect of jet-nozzle area on performance are provided.
Date: October 26, 1949
Creator: Armstrong, J. C.; Wilsted, H. D. & Vincent, K. R.
open access

Altitude cooling investigation of the R-2800-21 engine in the P-47G airplane 2: investigation of the engine & airplane variables affecting the cylinder temperature distribution

Description: "The data obtained from cooling tests of an R-2800-21 engine installed in a P-47G airplane were studied to determine which engine and airplane operation variables were mainly responsible for the extremely uneven temperature distribution among the 18 engine cylinders obtained at the medium and high engine-power conditions. The tests consisted of flights at altitudes from 5000 to 35,000 feet for the normal range of engine and airplane operation. The results of the study showed that a flow conditi… more
Date: October 9, 1946
Creator: Pesman, Gerard J. & Kaufman, Samuel J.
open access

Altitude cooling investigation of the R-2800-21 engine in the P-47g airplane 3: individual-cylinder temperature reduction by means of intake-pipe throttle and by coolant injection

Description: "Flight tests were conducted on a R-2800-21 engine in the P-47G airplane to determine the effect on the wall temperatures of cylinder 10 of throttling the charge in the intake pipe and of injecting a water-ethanol coolant into the intake pipe. Cylinder 10 was chosen for this investigation because it runs abnormally hot (head temperatures of the order of 45 F higher than those of the next hottest cylinder) at the medium and high-power conditions. Tests with interchanged cylinders showed that the… more
Date: October 9, 1946
Creator: Bell, E. Barton; Valerino, Michael F. & Manganiello, Eugene J.
open access

Altitude evaluation of several afterburner design variables on a J47-GE-17 turbojet engine

Description: From Introduction: "The investigation reported herein presents information on design factors and modifications of the production afterburner for the J47-GE-17 turbojet engine designed for medium temperature operation. The present report is concerned only with the afterburner performance and operating characteristics.Altitude-starting characteristics of two of the configurations in this report are discussed in reference 1."
Date: October 23, 1953
Creator: Braithwaite, Willis M.; Walker, Curtis L. & Sivo, Joseph N.
open access

Altitude-ignition limit of a turbojet engine using a condenser-discharge ignition system

Description: The altitude-ignition limits of a condenser-discharge ignition system installed on a turbojet engine were determined at a flight Mach number of 0.6 using 1.1-pound Reid vapor pressure fuel. Ignition was possible up to an altitude of 55,000 feet with 4.8 joules per spark and 6 sparks per second.
Date: October 23, 1951
Creator: Armstrong, John C.
open access

Altitude investigation of performance of turbine-propeller engine and its components

Description: From Introduction: "Results presented herein show the altitude performance of the turbine-propeller engine and its components and the applicability of the generalization method for predicting engine and component performance at altitudes other than the test altitude. Data from a brief investigation of windmilling and altitude starting characteristics of the engine also presented."
Date: October 5, 1950
Creator: Wallner, Lewis E. & Saari, Martin J.
open access

Altitude-Wind-Tunnel Investigation of Oil-System Performance of XR-4360-8 Engine in XTB2D-1 Airplane

Description: "An investigation was conducted in the Cleveland altitude wind tunnel to determine the aerodynamic characteristics and the oil delivery critical altitude of the oil-cooler installation of an XTB2D-1 airplane. The investigation was made with the propeller removed end with the engine operating at 1800 brake horsepower, an altitude of 15,000 feet (except for tests of oil-delivery critical altitude), oil-cooler flap deflections from -20 degrees to 20 degrees and inclinations of the thrust axis of 0… more
Date: October 11, 1946
Creator: Conrad, E. William
open access

Altitude-Wind-Tunnel Investigation of Performance of Several Propellers on YP-47M Airplane at High Blade Loading, 1, Aeroproducts H20C-162-X11M2 Four-Blade Propeller

Description: "An investigation was made in the Cleveland Altitude wind tunnel to determine the performance of an Aeroproducts H20C-162-X11M2 four-blade propeller on a YP-47M airplane at high blade loadings and high engine powers. The propeller characteristics were obtained for a range of power coefficients from 0.30 to 1.00 at free-stream Mach numbers of 0.40 and 0.50. The results of the force measurements are indicative only of trends in propeller efficiency with changes in power coefficient and advance-di… more
Date: October 11, 1946
Creator: Saari, Martin J. & Wallner, Lewis E.
open access

An Analysis of Airspeeds and Mach Numbers Attained by Lockheed Constellation Airplanes in Transcontinental Operations During the Early Summer of 1946

Description: Report presenting airspeed and altitude data obtained from Lockheed Constellation airplanes flying between New York and San Francisco during May and June of 1946 in order to determine the probability of reaching or exceeding given values of airspeed and Mach number. Analysis indicated that the total probability of exceeding the placard "never extend" speed depends primarily on the probability of exceeding this speed in descent. The probability of exceeding the critical Mach number is very negli… more
Date: October 10, 1947
Creator: Steiner, Roy
Back to Top of Screen