UNT Libraries Government Documents Department - 26 Matching Results

Search Results

open access

200-Mwe Prototype Large SGR: Reactor Structure Design and Evaluation

From abstract: This document presents the reactor structure design and evaluation for a 200-Mwe prototype large SGR.

Date: 1965

Creator: North American Aviation. Atomics International Division.

Item Type: Report

open access

Annual Technical Progress Report, AEC Unclassified Programs: 1965

Annual report describing progress on unclassified research programs funded by the U.S. Atomic Energy Commission during the 1964-65 fiscal year.

Date: November 10, 1965

Creator: North American Aviation. Atomics International Division.

Item Type: Report

open access

Application of Nuclear Power Plants (SNAP Units) to the Manned Orbiting Research Laboratory (MORL)

Abstract: This report describes in detail two designs of a nominal 6-kwe Nuclear Power Plant (NPP), one using thermoelectrics for power conversion and the other using the Mercury-Rankine cycle NPP.

Date: February 1, 1965

Creator: Botts, W. V.; Marko, M.; McCourt, P. E.; Keshishian, V.; Piccot, A. R. & Budney, G. S.

Item Type: Report

open access

Calandria Core Weld Joint Development

Abstract: The design and initial test of cutting and welding equipment developed to remotely cut and re-weld the bottom process tube joint are discussed in this report.

Date: June 30, 1965

Creator: Roberts, J. G.

Item Type: Report

open access

Calculations of the Madelung Constant and Inverse Twelfth Power Repulsion Factors for the Wurtzite Crystal Structure

From abstract: The Madelung constant and the inverse twelfth power repulsion factor have been calculated for the wurtzite structure for wide ranges of the crystal parameters and u.

Date: July 25, 1965

Creator: Gehman, William G.

Item Type: Report

open access

Carbide Fuels in Fast Reactors

Abstract: Cladding and fuel material processing prospects are reviewed, and fuel system possibilities for near-term (~1 mill/kwh) and long-range (<0.5 mil/kmh) fuel cycles are described.

Date: September 15, 1965

Creator: Wheelock, C. W.

Item Type: Report

open access

Development, Acceptance and Qualification Testing of the SNAP 10A Ejectable Heat Shield

From abstract: The development, acceptance, and qualification tests performed on the SNAP-10A Ejectable Heat Shield and components, the results of those tests, and the conclusions drawn from the results are presented in this report.

Date: August 31, 1965

Creator: Sperow, H. L.

Item Type: Report

open access

Development of High-Temperature Electrical Ground Test Heaters for the SNAP 10A Program

Introduction: The development and qualification of the system acceptance test heaters and the reactor simulator heater are described in this progress report.

Date: March 1, 1965

Creator: Blevitt, R.; Paine, G. & Sudar, S.

Item Type: Report

open access

Effect of Carburization on the Low Strain Rate Behavior of Type 304 Stainless Steel: Interim Report

Abstract: Pressure stress-rupture specimens of thin walled Type 304 stainless steel tubing have been tested at temperatures to 1300°F in the presence of an internal diffusion limited carbon source.

Date: August 31, 1965

Creator: Stone, D. H. & Schwartz, A. D.

Item Type: Report

open access

Fatigue Characteristics of 37-Tube, Modular, Steam Generator Head

Abstract: This report presents the pertinent results of a series of fatigue tests relating to the evaporator and superheater 37-tube module heads for the sodium heated steam generator described in NAA-SR-9826.

Date: February 20, 1965

Creator: Lemcoe, M. M.

Item Type: Report

open access

Final Design of Sodium-Heated, Modular, Steam Generators for the SCTI

Abstract: The following report covers the final design of the modular steam generators.

Date: February 1, 1965

Creator: Casey, D. F.; Hammer, J. J.; Logan, D. & Williams, M. C.

Item Type: Report

open access

Flux Control for Irradiation Experiments

Abstract: This report reviews various means which have been used to control experimental conditions in irradiation experiments, and presents the concept of local flux control.

Date: February 1, 1965

Creator: McCarty, W. K.

Item Type: Report

open access

The High-Temperature Irradiation Behavior of Hypostoichiometric Uranium Monocarbide

From abstract: A series of three multi-compartmented experiments was designed to investigate the irradiation behavior uranium carbide fuels, as a function of composition, temperature, and burn-up; and the mechanical properties of Type 304 stainless steel, as a function of temperature and integrated thermal neutron flux.

Date: August 31, 1965

Creator: Hahn, R. D.

Item Type: Report

open access

Increasing Thermocouple Reliability for in-Pile Experiments

Abstract: The results indicated that increased reliability can be obtained by using thermocouples made with insulation of increased density and/or a low thermal expansion sheath.

Date: April 20, 1965

Creator: Babbe, E. L.

Item Type: Report

open access

Irradiation Swelling, Phase Reversion, and Intergranular Cracking of U-10 wt % Mo Fuel Alloy

Abstract: A fuel development program has been conducted, to investigate the behavior of U-10 wt% Mo alloy at the fission rates and temperatures anticipated in Core I of the Hallam Nuclear Power Facility.

Date: February 1, 1965

Creator: Willard, R. M. & Schmitt, A. R.

Item Type: Report

open access

Large SGR Control Rod Development

From abstract: A development program was initiated to design, fabricate and test an absorber column with a 10 to 12 year lifetime, for use in the proposed LSGR.

Date: July 25, 1965

Creator: Dermer, M. D.

Item Type: Report

open access

The NAA 47 U - 10 Mo Fuel Irradiation Program for HNPF Core 1

Abstract: Atomics International conducted a fuel irradiation program to investigate and define the behavior of U-10 Mo fuel at the temperatures and fission rates anticipated in Hallam Nuclear Power Facility (HNPF) Core I.

Date: February 1, 1965

Creator: Schmitt, A. R.; Willard, R. M. & Magnus, D. K.

Item Type: Report

open access

Piqua Nuclear Power Facility Operations Analysis Program Progress Report Number 5: July-December 1964

Progress report for the Piqua Reactor Operations Analysis Program describing observations and analyses at the Piqua Nuclear Power Facility (PNPF). The program goals are to monitor operations and collect data in order to ensure that the plant's operation is safe, to improve design and performance, to evaluate the performance and lifetime of the plant's components and systems, to evaluate plant safety and safeguards, and to disseminate all information to the scientific community.

Date: June 15, 1965

Item Type: Report

open access

The Properties and Irradiation Behavior of U₃Si₂

Abstract: A limited study of the compound U₃Si₂ has been made in reference to its use as a prospective nuclear fuel in sodium cooled reactors.

Date: July 25, 1965

Creator: Shimizu, H.

Item Type: Report

open access

Quarterly Technical Progress Report, AEC Unclassified Programs: July-September 1965

Quarterly report describing progress on unclassified research programs funded by the U.S. Atomic Energy Commission during the first quarter of the 1966 fiscal year.

Date: December 22, 1965

Creator: North American Aviation. Atomics International Division.

Item Type: Report

open access

A Rotary Kiln for the Controlled Oxidation of UC

Abstract: A rotary kiln was evaluated for the controlled oxidations of UC.

Date: June 30, 1965

Creator: Strausberg, S.

Item Type: Report

open access

Second-cycle airox reprocessing and pellet refabricating of highly irradiated uranium dioxide

"This report describes second-cycle postirradiation examination and AIROX reprocessing-refabricating of uranium dioxide irradiated to an additional 10,000 Mwd/MTU burnup."

Date: September 21, 1965

Creator: Bodine, J. E.; Guon, J. & Sullivan, R. J.

Item Type: Report

open access

SNAP 10A FSEM-3 Agena Compatibility Test

From abstract: This report summarizes the results of SNAP-10A/Agena developmental testing and final vehicle systems tests.

Date: June 15, 1965

Creator: Teresa, M.

Item Type: Report

open access

SRE Heat Transfer System Demolition

From introduction: This report details the extensive modifications to the SRE heat transfer systems required to accomplish increased capacity objectives.

Date: August 31, 1965

Creator: Nicholson, J. O.

Item Type: Report

UNT Libraries Government Documents Department - 26 Matching Results

Search Results

Add Filters

Applied Filters

200-Mwe Prototype Large SGR: Reactor Structure Design and Evaluation

Annual Technical Progress Report, AEC Unclassified Programs: 1965

Application of Nuclear Power Plants (SNAP Units) to the Manned Orbiting Research Laboratory (MORL)

Calandria Core Weld Joint Development

Calculations of the Madelung Constant and Inverse Twelfth Power Repulsion Factors for the Wurtzite Crystal Structure

Carbide Fuels in Fast Reactors

Development, Acceptance and Qualification Testing of the SNAP 10A Ejectable Heat Shield

Development of High-Temperature Electrical Ground Test Heaters for the SNAP 10A Program

Effect of Carburization on the Low Strain Rate Behavior of Type 304 Stainless Steel: Interim Report

Fatigue Characteristics of 37-Tube, Modular, Steam Generator Head

Final Design of Sodium-Heated, Modular, Steam Generators for the SCTI

Flux Control for Irradiation Experiments

The High-Temperature Irradiation Behavior of Hypostoichiometric Uranium Monocarbide

Increasing Thermocouple Reliability for in-Pile Experiments

Irradiation Swelling, Phase Reversion, and Intergranular Cracking of U-10 wt % Mo Fuel Alloy

Large SGR Control Rod Development

The NAA 47 U - 10 Mo Fuel Irradiation Program for HNPF Core 1

Piqua Nuclear Power Facility Operations Analysis Program Progress Report Number 5: July-December 1964

The Properties and Irradiation Behavior of U₃Si₂

Quarterly Technical Progress Report, AEC Unclassified Programs: July-September 1965

A Rotary Kiln for the Controlled Oxidation of UC

Second-cycle airox reprocessing and pellet refabricating of highly irradiated uranium dioxide

SNAP 10A FSEM-3 Agena Compatibility Test

SRE Heat Transfer System Demolition