UNT Libraries Government Documents Department - 104 Matching Results

Search Results

Results: 1 - 24 next
open access

A 2D electrostatic PIC code for the Mark III Hypercube

Description: We have implemented a 2D electrostastic plasma particle in cell (PIC) simulation code on the Caltech/JPL Mark IIIfp Hypercube. The code simulates plasma effects by evolving in time the trajectories of thousands to millions of charged particles subject to their self-consistent fields. Each particle`s position and velocity is advanced in time using a leap frog method for integrating Newton`s equations of motion in electric and magnetic fields. The electric field due to these moving charged partic… more
Date: December 31, 1990
Creator: Ferraro, R. D.; Liewer, P. C. & Decyk, V. K.
Item Type: Refine your search to only Article
open access

Activated transport in AMTEC electrodes

Description: Transport of alkali metal atoms through porous cathodes of alkali metal thermal-to-electric converter (AMTEC) cells is responsible for significant, reducible losses in the electrical performance of these cells. Experimental evidence for activated transport of metal atoms at grain surfaces and boundaries within some AMTEC electrodes has been derived from temperature dependent studies as well as from analysis of the detailed frequency dependence of ac impedance results for other electrodes, inclu… more
Date: July 1, 1992
Creator: Williams, R. M.; Jeffries-Nakamura, B.; Ryan, M. A.; Underwood, M. L.; O`Connor, D. & Kikkert, S.
Item Type: Refine your search to only Article
open access

Activated transport in AMTEC electrodes

Description: Transport of alkali metal atoms through porous cathodes of alkali metal thermal-to-electric converter (AMTEC) cells is responsible for significant, reducible losses in the electrical performance of these cells. Experimental evidence for activated transport of metal atoms at grain surfaces and boundaries within some AMTEC electrodes has been derived from temperature dependent studies as well as from analysis of the detailed frequency dependence of ac impedance results for other electrodes, inclu… more
Date: January 1, 1992
Creator: Williams, R.M.; Jeffries-Nakamura, B.; Ryan, M.A.; Underwood, M.L.; O'Connor, D. & Kikkert, S.
Item Type: Refine your search to only Article
open access

Advanced subsystems development. Second semi-annual progress report, April 1--October 1, 1978

Description: The concept design for a small (less than 10 MWe) solar thermal electric generating plant was completed using projected 1985 technology. The systems requirements were defined and specified. The components, including an engineering prototype for one 15 kWe module of the generating plant, were conceptually designed. Significant features of the small solar thermal power plant were identified as the following: (1) 15-kWe Stirling-cycle engine/alternator with constant power output; (2) 10-meter poin… more
Date: November 15, 1978
Item Type: Refine your search to only Report
open access

Advances in high temperature components for AMTEC (alkali metal thermal-to-electric converter)

Description: Long lifetimes are required for AMTEC (or sodium heat engine) components for aerospace and terrestrial applications, and the high heat input temperature as well as the alkali metal liquid and vapor environment places unusual demands on the materials used to construct AMTEC devices. In addition, it is important to maximize device efficiency and power density, while maintaining a long life capability. In addition to the electrode, which must provide both efficient electrode kinetics, transport of… more
Date: January 1, 1991
Creator: Williams, R.M.; Jeffries-Nakamura, B.; Underwood, M.L.; Ryan, M.A.; O'Connor, D. & Kikkert, S.
Item Type: Refine your search to only Article
open access

Advances in high temperature components for AMTEC (alkali metal thermal-to-electric converter)

Description: Long lifetimes are required for AMTEC (or sodium heat engine) components for aerospace and terrestrial applications, and the high heat input temperature as well as the alkali metal liquid and vapor environment places unusual demands on the materials used to construct AMTEC devices. In addition, it is important to maximize device efficiency and power density, while maintaining a long life capability. In addition to the electrode, which must provide both efficient electrode kinetics, transport of… more
Date: December 31, 1991
Creator: Williams, R. M.; Jeffries-Nakamura, B.; Underwood, M. L.; Ryan, M. A.; O`Connor, D. & Kikkert, S.
Item Type: Refine your search to only Article
open access

Assessment of advanced coal-gasification processes. [AVCO high throughput gasification in process; Bell High Mass Flux process; CS-R process; and Exxon Gasification process]

Description: This report represents a technical assessment of the following advanced coal gasification processes: AVCO High Throughput Gasification (HTG) Process, Bell Single - Stage High Mass Flux (HMF) Process, Cities Service/Rockwell (CS/R) Hydrogasification Process, and the Exxon Catalytic Coal Gasification (CCG) Process. Each process is evaluated for its potential to produce SNG from a bituminous coal. In addition to identifying the new technology these processes represent, key similarities/differences… more
Date: June 1, 1981
Creator: McCarthy, J.; Ferrall, J.; Charng, T. & Houseman, J.
Item Type: Refine your search to only Report
open access

City Smoke Ordinances and Smoke Abatement

Description: From Introduction: "In connection with the fuel investigations conducted by the Bureau of Mines much information has been accumulated as to the smoke abatement activities in various cities. The essential features of the information are presented in this report, which, it is believed, will be of public interest and benefit, especially to those communities that are just beginning organized effort to abate unnecessary smoke."
Date: 1912
Creator: Flagg, Samuel B.
Item Type: Refine your search to only Report
open access

The comet Giacobini-Zinner magnetotail: Axial stresses and inferred near-nucleus properties

Description: Utilizing the electron and magnetic field data from the ICE tail traversal of Comet Giacobini-Zinner along with the MHD equations, we have developed a steady state, stress balance model of the cometary magnetotail. With it we infer many important but unmeasured ion properties within the G-Z magnetotail both at ICE and upstream at the average point along each streamline where cometary ions are picked-up. The derived tailward ion flow speed at ICE is quite constant at approx.-20 to -30 km/sec acr… more
Date: October 1, 1986
Creator: McComas, D. J.; Gosling, J. T.; Bame, S. J.; Slavin, J. A.; Smith, E. J. & Steinberg, J. L.
Item Type: Refine your search to only Article
open access

Control of Metallurgical and mineral dusts and fumes in Los Angeles County, California

Description: Report issued by the U.S. Bureau of Mines discussing metallurgical and mineral fumes and dusts in Los Angeles County, California. Properties of dusts and fumes from different minerals are presented. This report includes tables, maps, illustrations, and photographs.
Date: April 1952
Creator: Allen, Glenn L.; Viets, Floyd H. & McCabe, Louis C.
Item Type: Refine your search to only Report
open access

Cost of energy from utility-owned solar electric systems. A required revenue method for ERDA/EPRI evaluations

Description: This methodology calculates the electric energy busbar cost from a utility-owned solar electric system. This approach is applicable to both publicly- and privately-owned utilities. Busbar cost represents the minimum price per unit of energy consistent with producing system-resultant revenues equal to the sum of system-resultant costs. This equality is expressed in present value terms, where the discount rate used reflects the rate of return required on invested capital. Major input variables de… more
Date: June 1, 1976
Item Type: Refine your search to only Report
open access

Design considerations for a fiber optic communications network for power systems

Description: The design of a fiber optic communication network for monitoring and control in power systems is discussed. It is shown that by appropriate choice of protocols, a fault-tolerant system can be built that operates in any arbitrary configuration. Since the network is based on fiber optics, it can be made fast enough for substation monitoring and control. In this application, a relatively small number of cables is required to implement a high reliability system. The network can also be used for dis… more
Date: August 1, 1993
Creator: Kirkham, H.; Johnston, A. R. & Allen, G. D.
Item Type: Refine your search to only Article
open access

Development of alternative oxygen production source using a zirconia solid electrolyte membrane

Description: The objective of this multiyear effort was the development, fabrication and testing of a zirconia oxygen production module capable of delivering approximately 100 liters/minute (LPM) of oxygen. The work discussed in this report consists of development and improvement of the zirconia cell along with manufacture of cell components, preliminary design of the final plant, additional economic analysis and industrial participation. (VC)
Date: August 1, 1990
Creator: Suitor, J. W.; Clark, D. J. & Losey, R. W.
Item Type: Refine your search to only Report
open access

Development of alternative oxygen production source using a zirconia solid electrolyte membrane. Final report

Description: The objective of this multiyear effort was the development, fabrication and testing of a zirconia oxygen production module capable of delivering approximately 100 liters/minute (LPM) of oxygen. The work discussed in this report consists of development and improvement of the zirconia cell along with manufacture of cell components, preliminary design of the final plant, additional economic analysis and industrial participation. (VC)
Date: August 1, 1990
Creator: Suitor, J. W.; Clark, D. J. & Losey, R. W.
Item Type: Refine your search to only Report
open access

Development of Bypassed Oil Reserves Using Behind Casing Resistivity Measurements

Description: Tubing and rods of the S.P. Pedro-Nepple No.1 well were pulled and the well was prepared for running of Schlumberger's Cased Hole Formation Resistivity Tool (CHFR) in selected intervals. The CHFR tool was successfully run and data was captured. The CHFR formation resistivity readings were compared to original open hole resistivity measurements. Separation between the original and CHFR resistivity curves indicate both swept and un-swept sand intervals. Both watered out sand intervals and those w… more
Date: April 2, 2006
Creator: Conner, Michael G. & Blesener, Jeffrey A.
Item Type: Refine your search to only Report
open access

Direct Conversion Technology

Description: The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. Initially, two systems were selected for exploratory research and advanced development. These are Alkali Metal Thermal-to-Electric Converter (AMTEC) and Two-Phase Liquid Metal MD Generator (LMMHD). This report describes progress that has been made during the … more
Date: July 1, 1992
Creator: Back, L.H.; Fabris, G. & Ryan, M.A.
Item Type: Refine your search to only Report
open access

Direct conversion technology

Description: The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. This report contains progress of research on the Alkali Metal Thermal-to-Electric Converter (AMTEC) and on the Two-Phase Liquid-Metal MHD Electrical Generator (LMMHD) for the period January 1, 1991 through December 31, 1991. Research on AMTEC and on LMMHD was… more
Date: January 7, 1992
Creator: Massier, P.F.; Back, L.H.; Ryan, M.A. & Fabris, G.
Item Type: Refine your search to only Report
open access

Direct conversion technology: Annual summary report CY 1988

Description: The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct thermal-to-electric energy conversion systems that have potential application for energy conservation in the end-use sectors. This report contains progress of research on the Alkali Metal Thermal-to-Electric Converter (AMTEC), and on the Two-Phase Liquid-Metal MHD Electrical Generator (LMMHD) for the period January 1988 through December 1988. Research on t… more
Date: December 1, 1988
Creator: Massier, P. F.; Bankston, C. P.; Fabris, G. & Kirol, L. D.
Item Type: Refine your search to only Report
open access

Direct conversion technology. Annual summary report CY 1991, January 1, 1991--December 31, 1991

Description: The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. This report contains progress of research on the Alkali Metal Thermal-to-Electric Converter (AMTEC) and on the Two-Phase Liquid-Metal MHD Electrical Generator (LMMHD) for the period January 1, 1991 through December 31, 1991. Research on AMTEC and on LMMHD was… more
Date: January 7, 1992
Creator: Massier, P. F.; Back, L. H.; Ryan, M. A. & Fabris, G.
Item Type: Refine your search to only Report
open access

Direct Conversion Technology. Progress report, January 1, 1992--June 30, 1992

Description: The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. Initially, two systems were selected for exploratory research and advanced development. These are Alkali Metal Thermal-to-Electric Converter (AMTEC) and Two-Phase Liquid Metal MD Generator (LMMHD). This report describes progress that has been made during the … more
Date: July 1, 1992
Creator: Back, L. H.; Fabris, G. & Ryan, M. A.
Item Type: Refine your search to only Report
open access

Dual arm master controller concept

Description: The Advanced Servomanipulator (ASM) slave was designed with an anthropomorphic stance, gear/torque tube power drives, and modular construction. These features resulted in increased inertia, friction, and backlash relative to tape-driven manipulators. Studies were performed which addressed the human factors design and performance trade-offs associated with the corresponding master controller best suited for the ASM. The results of these studies, as well as the conceptual design of the dual arm m… more
Date: January 1, 1984
Creator: Kuban, D.P. & Perkins, G.S.
Item Type: Refine your search to only Article
open access

Dual arm master controller development

Description: The advanced servomanipulator (ASM) slave was designed with an anthropomorphic stance, gear/torque tube power drives, and modular construction. These features resulted in increased inertia, friction, and backlash relative to tape-driven manipulators. Studies were performed which addressed the human factors design and performance trade-offs associated with the corresponding master controller best suited for the ASM. The results of these studies, as well as the conceptual design of the dual arm m… more
Date: January 1, 1985
Creator: Kuban, D. P. & Perkins, G. S.
Item Type: Refine your search to only Article
Back to Top of Screen