UNT Libraries Government Documents Department - 118 Matching Results

Search Results

Results: 1 - 24 next
open access

Heat-Transfer Tests of Two Steel Cylinder Barrels With Aluminum Fins Manufactured by Factory Production Method

Description: Report presenting testing of two engine cylinder barrels with aluminum fins. The primary purpose was to determine the heat-transfer coefficients and the excellence of the bonds between the aluminum fins and the aluminum base and between the aluminum base and the steel of the two barrels when manufactured by a large-volume production method.
Date: August 1940
Creator: Ellerbrock, Herman H., Jr.
Item Type: Refine your search to only Report
open access

High-speed drag tests of several fuselage shapes in combination with a wing

Description: Drag testing was conducted in the high-speed wind tunnel of 23 conditions combining six streamline shapes and three conventional cowling-fuselage bodies. All of the models were tested in combination with a wing in order to include wing-fuselage interference effects. The critical speeds of combinations tested were, in general, determined by the wing-fuselage juncture.
Date: August 1940
Creator: Draley, Eugene C.
Item Type: Refine your search to only Report
open access

Power-on wind-tunnel tests of the 1/8-scale model of the Brewster F2A airplane with full-span slotted flaps

Description: "At the request of the Bureau of Aeronautics, Navy Department, tests were made in the 7- by 10-foot wind tunnel of the 1/8-scale model of the Brewster F2A airplane with full-span slotted flaps. The object of the tests was to determine the power-on static lateral and longitudinal stability of the complete model with a new wing which had a full-span slotted flap and a plain and slot-lip aileron for lateral control" (p. 1).
Date: August 1941
Creator: Lowry, John G.
Item Type: Refine your search to only Report
open access

Static Characteristics of Curtiss Propellers Having Different Blade Sections

Description: Report presenting static tests on four full-scale two-bladed propellers differing only in blade sections at blade angles from 0 to 20 degrees at the three-quarters radius. Two of the propellers were also tested as three-bladed propellers. For all of the propellers tested, the highest value of the static thrust figure of merit occurred at a tip-speed ratio between 0.7 and 0.9; the highest efficiency in flight may be expected in the same range of tip-speed ratios.
Date: August 1941
Creator: Corson, Blake W., Jr. & Mastrocola, Nicholas
Item Type: Refine your search to only Report
open access

Wind-Tunnel Investigation of Control-Surface Characteristics 3: A Small Aerodynamic Balance of Various Nose Shapes Used With a 30-Percent-Chord Flap on an NACA 0009 Airfoil

Description: Report presenting tests in the 4- by 6-foot vertical wind tunnel of an NACA 0009 airfoil with a 30-percent-chord flap with a small amount of aerodynamic balance. In the investigation, the effect of balance nose shape and gap at the nose of the flap has been determined. The results indicate that, in general, the lift effectiveness of the flap was unaffected by the addition of a small amount of aerodynamic overhang, and the balance effectiveness of the flap was increased.
Date: August 1941
Creator: Ames, Milton B., Jr.
Item Type: Refine your search to only Report
open access

Wind-tunnel investigation of control-surface characteristics II : a large aerodynamic balance of various nose shapes with a 30-percent-chord flap on an NACA 0009 airfoil

Description: Report presenting testing of an NACA 0009 airfoil with a 30-percent-chord flap with a 49.5-percent flap-chord balance with various nose shapes and two gaps. The results indicated that the flap is overbalanced when deflected, regardless of nose shape. Results regarding lift, hinge moment of flap, drag, pitching moment, and effect of differential balancing tab are provided.
Date: August 1941
Creator: Sears, Richard I. & Hoggard, H. Page, Jr.
Item Type: Refine your search to only Report
open access

Wind-Tunnel Tests of Four Curtiss Propellers Embodying Different Blade Sections

Description: Tests of four 10-foot propellers were made in the propeller-research tunnel for the Army Air Corps to check flight and static thrust test results made on several propellers embodying Clark Y and modified NACA 16-series sections. These propellers were identical as to diameter and activity factor and very closely identical in thickness ratio and pitch distribution. The blades embodied sections with both single- and double-cambered Clark Y, modified NACA 16-series, and a combination of Clark Y and… more
Date: August 1941
Creator: Gray, W. H.
Item Type: Refine your search to only Report
open access

Wind-tunnel tests of two Hamilton Standard propellers embodying Clark Y and NACA 16 series blade sections

Description: Report presenting tests of two 10-foot Hamilton Standard propellers to determine the relative merits of the Clark Y and NACA 16-series sections and to determine the negative thrust available at negative angles. Little difference was noted between propellers at peak efficiency for the low Mach numbers used in the tunnel tests.
Date: August 1941
Creator: Gray, W. H.
Item Type: Refine your search to only Report
open access

The Effect of Propeller Operation on the Air Flow in the Region of the Tail Plane for a Twin-Engine Tractor Monoplane

Description: Report presenting air-flow surveys made in the region of the tail plane of a typical twin-engine tractor monoplane model with tail surfaces removed. The surveys were made with propellers removed and operating and for both cases included the conditions for flaps retracted and flaps deflected 50 degrees.
Date: August 1942
Creator: Sweberg, Harold H.
Item Type: Refine your search to only Report
open access

Generalized selection charts for bombers powered by one, two, four, and six 3000-horsepower engines 1: capacity and economy

Description: Supplement using data from a previous report to show the cargo that can be carried at various ranges, pounds of cargo that can be carried per pound of fuel, and other graphs to simplify the problem of determining which cargo can be carried at any range. The assumptions, parameters, and equations from the original report are carried over in the supplement.
Date: August 1942
Creator: Brevoort, Maurice J.; Stickle, George W. & Hill, Paul R.
Item Type: Refine your search to only Report
open access

Generalized selection charts for bombers powered by two, four, and six 3000-horsepower engines

Description: Report presenting a study of the performance of bombers powered by two, four, and six 3000-horsepower engines supercharged to 35,000 feet. The performances are computed and are based on drag coefficients equal to the best obtained on modern airplanes and on weight estimates obtained from modern Army Air Forces airplanes. A chart is provided with the coordinates of power loading and wing loading noted so that all performances can be compared.
Date: August 1942
Creator: Brevoort, Maurice J.; Stickle, George W. & Hill, Paul R.
Item Type: Refine your search to only Report
open access

Jet-Boundary Corrections to the Downwash Behind Powered Models in Rectangular Wind Tunnels With Numerical Values for 7- by 10-Foot Closed Wind Tunnels

Description: Report presenting methods for determining the jet-boundary corrections to the downwash behind models in rectangular wind tunnels. The methods take into account the tunnel dimensions, the type of jet, the span loading of the model, the geometric position of the wind and of the tail in the tunnel, the displacement of the wing wake, and the effect of the slipstream.
Date: August 1942
Creator: Swanson, Robert S. & Schuldenfrei, Marvin J.
Item Type: Refine your search to only Report
open access

A mass-distribution criterion for predicting the effect of control manipulation on the recovery from a spin

Description: Report presenting the results of spin-tunnel testing of 65 models indicating that when a single-engine type airplane was simulated with mass distributed along the fuselage, the rudder was the predominant control for recovery. The primary focus of this investigation is to determine the spinning characteristics of the airplane and to develop a useful criterion for predicting the optimum control manipulation for recovery.
Date: August 1942
Creator: Neihouse, A. I.
Item Type: Refine your search to only Report
open access

Procedure Used at Aluminum Research Laboratories for Determining Type of Attack in Some Aluminum Alloys

Description: Report presenting samples of 17S-T and 24S-T aluminum alloys subjected to accelerated corrosion tests in which the corrosion period was established at 6 hours for samples that had been etched to produce a uniform surface. The results indicate the types of corrosion attack, which are described in standard terminology, and may form a basis for estimating the resistance of the material to corrosion by a comparison of the relative depth and frequency of the corrosive attacks.
Date: August 1942
Creator: Walton, C. J. & Keller, F.
Item Type: Refine your search to only Report
Back to Top of Screen