UNT Libraries Government Documents Department - 1,038 Matching Results

Search Results

prev Results: 49 - 72 next
open access

Altitude-Wind-Tunnel Investigation of the 19B-2, 19B-8, and 19XB-1 Jet-Propulsion Engines 2 - Analysis of Turbine Performance of the 19B-8 Engine

Description: "Performance characteristics of the turbine in the 19B-8 jet propulsion engine were determined from an investigation of the complete engine in the Cleveland altitude wind tunnel. The investigation covered a range of simulated altitudes from 5000 to 30,000 feet and flight Mach numbers from 0.05 to 0.46 for various tail-cone positions over the entire operable range of engine speeds. The characteristics of the turbine are presented as functions of the total-pressure ratio across the turbine and th… more
Date: January 20, 1947
Creator: Krebs, Richard P. & Suozzi, Frank L.
Item Type: Refine your search to only Report
open access

Altitude-Wind-Tunnel Investigation of the 19B-2, 19B-8 and 19XB-1 Jet- Propulsion Engines: 4 - Analysis of Compressor Performance

Description: "Investigations were conducted in the Cleveland altitude wind tunnel to determine the performance and operational characteristics of the 19B-2, 19B-8, and 19XS-1 turbojet engines. One objective was to determine the effect of altitude, flight Mach number, and tail-pipe-nozzle area on the performance characteristics of the six-stage and ten-stage axial-flow compressors of the 19B-8 and 19XB-1 engines, respectively, The data were obtained over a range of simulated altitudes and flight Mach numbers… more
Date: April 25, 1947
Creator: Dietz, Robert O. & Kuenzig, John K.
Item Type: Refine your search to only Report
open access

Altitude-Wind-Tunnel Investigation of the 19B-2, 19B-8, and 19XB-1 Jet Propulsion Engines, 4 - Performance and Windmilling Drag Characteristics

Description: The performance characteristics of the 19B-8 and 19XB-1 turbojet engines and the windmilling-drag characteristics of the 19B-6 engine were determined in the Cleveland altitude wind tunnel. The investigations were conducted on the 19B-8 engine at simulated altitudes from 5000 to 25,000 feet with various free-stream ram-pressure ratios and on the 19XB--1 engine at simulated altitudes from 5000 to 30,000 feet with approximately static free-stream conditions.
Date: April 9, 1947
Creator: Fleming, William A. & Dietz, Robert O., Jr.
Item Type: Refine your search to only Report
open access

Altitude-wind-tunnel investigation of thrust augmentation of a turbojet engine 3: performance with tail-pipe burning in standard-size tail pipe

Description: From Introduction: "Evaluation of tail-pipe burning in this engine with a larger tail-pipe combustion chamber is discussed in reference 1. Results of investigations on tail-pipe burning in this engine at static sea-level conditions are presented in reference 2. An investigation of thrust augmentation by means of injecting water at the inlet of an axial-flow compressor engine is discussed in reference 3."
Date: August 11, 1947
Creator: Fleming, William A. & Golladay, Richard L.
Item Type: Refine your search to only Report
open access

Altitude-wind-tunnel investigation of thrust augmentation of a turbojet engine II: performance with water injection at compressor inlet

Description: Report presenting testing of a standard turbojet engine by water injection at the inlet of the axial-flow compressor in the altitude wind tunnel. Engine performance at 7600 rpm was obtained over a wide range of water-air-pressure ratios and ram-pressure ratios. Results regarding the engine-component performance are also provided.
Date: May 19, 1947
Creator: Dietz, Robert O. & Fleming, William A.
Item Type: Refine your search to only Report
open access

An Analysis of Airspeeds and Mach Numbers Attained by Lockheed Constellation Airplanes in Transcontinental Operations During the Early Summer of 1946

Description: Report presenting airspeed and altitude data obtained from Lockheed Constellation airplanes flying between New York and San Francisco during May and June of 1946 in order to determine the probability of reaching or exceeding given values of airspeed and Mach number. Analysis indicated that the total probability of exceeding the placard "never extend" speed depends primarily on the probability of exceeding this speed in descent. The probability of exceeding the critical Mach number is very negli… more
Date: October 10, 1947
Creator: Steiner, Roy
Item Type: Refine your search to only Report
open access

Analysis of effect of basic design variables on subsonic axial-flow-compressor performance

Description: From Summary: "A blade-element theory for axial-flow compressors has been developed and applied to the analysis of the effects of basic design variables such as Mach number, blade loading, and velocity distribution on compressor performance. The relations among several efficiencies useful in compressor design are derived and discussed. The possible gains in useful operating range obtainable by the use of adjustable stator blades are discussed and a rapid approximate method of calculating blade-… more
Date: November 26, 1947
Creator: Sinnette, John T., Jr.
Item Type: Refine your search to only Report
open access

An analysis of longitudinal-control problems encountered in flight at transonic speeds with a jet-propelled airplane

Description: From Introduction: "This report presents an analysis based on flight and wind-tunnel test data directed toward the determination of the probable cause of the pitch-up. Wing pressure distribution and stability and control characteristics in the dive are also included."
Date: September 25, 1947
Creator: Brown, Harvey H.; Rolls, L. Stewart & Clousing, Lawrence A.
Item Type: Refine your search to only Report
open access

Analysis of Performance of Jet Engine From Characteristics of Components 1: Aerodynamic and Matching Characteristics of Turbine Component Determined With Cold Air

Description: Note presenting the performance of the turbine component of a research jet engine investigated with cold air. The interaction and matching of the turbine with the eight-stage compressor were computed with the combination considered as a jet engine and overall performance of the engine was then determined. Results regarding the performance of the first stator ring, turbine performance, and turbine-compressor matching are provided.
Date: October 1947
Creator: Goldstein, Arthur W.
Item Type: Refine your search to only Report
open access

Analysis of Performance of Jet Engine From Characteristics of Components 1: Aerodynamic and Matching Characteristics of Turbine Component Determined With Cold Air

Description: "The performance of the turbine component of an NACA research jet engine was investigated with cold air. The interaction and the matching of the turbine with the NACA eight-stage compressor were computed with the combination considered as a jet engine. The over-all performance of the engine was then determined. The internal aerodynamics were studied to the extent of investigating the performance of the first stator ring and its influence on the turbine performance" (p. 397).
Date: June 6, 1947
Creator: Goldstein, Arthur W.
Item Type: Refine your search to only Report
open access

An Analysis of the Compressive Strength of Honeycomb Cores for Sandwich Construction

Description: Note presenting an analysis that was undertaken as part of an investigation of low-density fibrous core materials for sandwich construction. This particular investigation found that honeycomb structure exhibit promise as core materials because of their high strength-weight ratios. A formula has been derived that considerably reduced the amount of testing necessary to evaluate the effectiveness of the materials.
Date: April 1947
Creator: Norris, Charles B.
Item Type: Refine your search to only Report
open access

An analysis of the factors that affect the exhaust process of a four-stroke-cycle reciprocating engine

Description: From Introduction: "An investigation was made to determine the relative significance of the factors that affect the exhaust process; the effects that an exhaust-process change has on cylinder charging were given special attention. Differential equations of this nature have been developed by Kemble (reference 1) but the forms of these equations are such that general conclusions regarding the various factors affecting the exhaust process cannot be determined."
Date: April 1947
Creator: Stanitz, John D.
Item Type: Refine your search to only Report
open access

An Analysis of the Full-Floating Journal Bearing

Description: Report discussing an analysis of the operating characteristics of a full-floating journal bearing, a bearing in which a floating sleeve is located between the journal and bearing surfaces, is presented together with charts from which the performance of such bearings may be predicted.
Date: January 1, 1947
Creator: Shaw, M. C. & Nussdorfer, T. J., Jr.
Item Type: Refine your search to only Report
open access

An Analysis of the Full-Floating Journal Bearing

Description: "An analysis of the operating characteristics of a full-floating bearing - a bearing in which a floating sleeve is located between the journal and bearing surfaces - is presented together with charts - from which the performance of such bearings may be predicted. Examples are presented to illustrate the use of these charts and a limited number of experiments conducted upon a glass full-floating bearing to verify some results of the analysis are reported. The floating sleeve can operate over a w… more
Date: January 28, 1947
Creator: Shaw, M. C. & Nussdorfer, T. J., Jr.
Item Type: Refine your search to only Report
open access

Analysis, Verification, and Application of Equations and Procedures for Design of Exhaust-Pipe Shrouds

Description: Investigations were made to develop a simplified method for designing exhaust-pipe shrouds to provide desired or maximum cooling of exhaust installations. Analysis of heat exchange and pressure drop of an adequate exhaust-pipe shroud system requires equations for predicting design temperatures and pressure drop on cooling air side of system. Present experiments derive such equations for usual straight annular exhaust-pipe shroud systems for both parallel flow and counter flow. Equations and met… more
Date: December 1947
Creator: Ellerbrock, Herman H., Jr.; Wcislo, Chester R. & Dexter, Howard E.
Item Type: Refine your search to only Report
open access

Analytical and Experimental Investigation of Bolted Joints

Description: From Introduction: "The present paper contains the development of a recurrence formula for the bolt loads for the simplified case of a symmetrical butt joint with bolts spaced evenly in line with the applied load. The method presented herein is based on the fundamental relationship which was developed in reference 1 between the loads on any two successive bolts. The present paper also gives the results of an experimental investigation conducted to substantiate further the adequacy of the elasti… more
Date: October 1947
Creator: Rosenfeld, Samuel J.
Item Type: Refine your search to only Report
open access

Analytical Comparison of a Standard Turbojet Engine, a Turbojet Engine with a Tail-Pipe Burner, and a Ram-Jet Engine

Description: From Introduction: "Experimental investigations (reference 1) have shown that in some cases the thrust can be more than doubled by means of tail-pipe burning. A comparison is made of a standard turbojet engine, whose thrust is augmented by tail-pipe burning, and a ram-jet engine. The performance characteristics for the ram-jet engine were computed entirely from theoretical considerations and on the assumption that the burner-inlet velocity was constant."
Date: February 10, 1947
Creator: Krebs, Richard P. & Palasics, John
Item Type: Refine your search to only Report
open access

An Analytical Investigation of the Heat Losses from a U.S. Navy K-Type Airship

Description: From Summary: "The heat losses from the envelope surface of a U.S. Navy K-type airship are evaluated to determine if the use of heat is a feasible means of preventing ice and snow accumulations on lighter-than-air craft during flight and when moored uncovered. Consideration is given to heat losses in clear air (no liquid water present in the atmosphere) and in probable conditions of icing and snow. The results of the analysis indicate that the amount of heat required in flight to raise the surf… more
Date: February 17, 1947
Creator: Hillendahl, Wesley H. & George, Ralph E.
Item Type: Refine your search to only Report
open access

Analytical requirements of the 234-5 Project

Description: At this time it is desirable that preliminary estimates be made of the manpower, equipment, space, layout and facility requirements of the analytical section for the 234-5 Project. To arrive at these requirements a rough estimate of the required analyses, their scope and their frequency has been compiled. This is expected to serve as a basis for the Laboratories Division to outline their space and equipment requirements as soon as possible and to assemble the required personnel for operation la… more
Date: October 23, 1947
Creator: Work, J.B.
Item Type: Refine your search to only Report
open access

Analytical Treatment of Normal Condensation Shock

Description: "The condensation of water vapor in an air has the following consequences: acquisition of heat (liberated heat vaporization; loss of mass on the part of the flowing gas (water vapor is converted to liquid); change in the specific gas constants and of the ratio k of the specific heats (caused by change of gas composition). A discontinuous change of state is therefore connected with the condensation; schlieren photographs of supersonic flows in two-dimensional Laval nozzles show two intersecting … more
Date: July 1947
Creator: Heybey
Item Type: Refine your search to only Report
open access

An Anaylsis of Control Requirements and Control Parameters for Direct-Coupled Turbojet Engines

Description: "Requirements of an automatic engine control, as affected by engine characteristics, have been analyzed for a direct-coupled turbojet engine. Control parameters for various conditions of engine operation are discussed. A hypothetical engine control is presented to illustrate the use of these parameters. An adjustable speed governor was found to offer a desirable method of over-all engine control. The selection of a minimum value of fuel flow was found to offer a means of preventing unstable bur… more
Date: June 13, 1947
Creator: Novik, David & Otto, Edward W.
Item Type: Refine your search to only Report
Back to Top of Screen