45 Matching Results

Search Results

Advanced search parameters have been applied.
in subjects: "aircraft design"  
Results: 1 - 24 next
open access

A Profile-Drag Investigation in Flight on an Experimental Fighter-Type Airplane the North American XP-51

Description: Report discussing the results of an investigation of the North American XP-51 and its low-drag airfoils. Several surface conditions were tested and the profile-drag coefficients were determined. The surface that was smoothened and faired by filling and sanding had the lowest profile-drag coefficient.
Date: November 1942
Creator: Zalovcik, John A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation of Several Factors Affecting the Performance of a High-Speed Pursuit Airplane With Air-Cooled Radial Engine

Description: Report details an investigation into various potential improvements and modifications to pursuit airplanes. NACA low-drag airfoil sections and their use for reducing drag and increasing compressibility speeds were examined. Other items covered include the propeller slipstream, high-speed cowling arrangement, and placement of wing guns.
Date: November 1941
Creator: Wenzinger, Carl J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Model Tests of a Wing-Duct System for Auxiliary Air Supply

Description: Report discusses the design of a cooling system developed for a Pratt & Whitney H-2800 engine equipped with a two-stage supercharger. The wing-duct system was newly developed and was determined to be a valuable method for cooling engine auxiliaries by combining simplicity with low drag and excellent cooling capabilities.
Date: January 1941
Creator: Bierman, David & Corson, Blake W., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Effects of Aerodynamic Heating on Ice Formations on Airplane Propellers

Description: An investigation has been made of the effect of aerodynamic heating on propeller-blade temperatures. The blade temperature rise resulting from aerodynamic heating was measured and the relation between the resulting blade temperatures and the outer limit of the iced-over region was examined. It was found that the outermost station at which ice formed on a propeller blade was determined by the blade temperature rise resulting from the aerodynamic heating at that point.
Date: August 1940
Creator: Rodert, Lewis A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

High-Speed Tests of a Model Twin-Engine Low-Wing Transport Airplane

Description: "Force tests were made of a 1/8-scale model of a twin-engine low-wing transport airplane in the NACA 8-foot high-speed wind tunnel to investigate compressibility and interference effects at speeds up to 450 miles per hour. In addition to tests of the standard arrangement of the model tests were made with several modifications designed to reduce the drag and to increase the critical speed. The results show serious increases in drag at critical speeds below 450 miles per hour due to the occurrenc… more
Date: April 1940
Creator: Becker, John V. & Leonard, Lloyd H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Flush-Riveted Joints

Description: Report discusses the strength of several types of flush-riveted joints, including single-shearing, double-shearing, and tensile specimens. The stress at failure, type of failure, and d/t ratio are provided. Dimpled joints were found to be the strongest, but their strength was heavily influenced by the details of their construction.
Date: January 1940
Creator: Bruggeman, William C. & Roop, Frederick C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Critical Compressive Stress for Outstanding Flanges

Description: "A chart is presented for the values of the coefficient in the formula for the critical compressive stress at which buckling may be expected to occur in outstanding flanges. These flanges are flat rectangular plates supported along the Loaded edges, supported and elastically restrained along one unloaded edge, and free along the other unloaded edge. The mathematical derivations of the formulas required for the construction of the chart are given" (p. 1).
Date: April 1941
Creator: Lundquist, Eugene E. & Stowell, Elbridge Z.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An Investigation of the Drag of Windshields in the 8-Foot High-Speed Wind Tunnel

Description: "The drag of closed-cockpit and transport-type windshields was determined from tests made at speeds from 200 to 440 miles per hour in the NACA 8-foot high-speed wind tunnel. This speed range corresponds to a test Reynolds number range of 2,510,000 to 4,830,000 based on the mean aerodynamic chord of the full-span model (17.29 inches). The shapes of the windshield proper, the hood, and the tail fairing were systematically varied to include common types and a refined design" (p. 1).
Date: June 1939
Creator: Robinson, Russell G. & Delano, James B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Calculated Effect of Various Hydrodynamic and Aerodynamic Factors on the Take-Off of a Large Flying Boat

Description: Present designs for large flying boats are characterized by high wing loading, high aspect ratio, and low parasite drag. The high wing loading results in the universal use of flaps for reducing the takeoff and landing speeds. These factors have an effect on takeoff performance and influence to a certain extent the design of the hull. An investigation was made of the influence of various factors and design parameters on the takeoff performance of a hypothetical large flying boat by means of take… more
Date: June 1939
Creator: Olson, R. E. & Allison, J. M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Profile-Drag Investigation of an Airplane Wing Equipped with Rubber Inflatable De-Icer

Description: "The National Advisory Committee for Aeronautics has made profile-drag measurements in flight of a wing which was equipped with a rubber inflatable de-icer and to which various stimulated ice formations were attached. Tuft observations at the stalling speed of the wing with the various drag conditions were made in order to determine the influence on the maximum lift coefficient. The de-icer installation caused an increase of from 10-20% in the profile drag of the plain wing and reduced CL(sub m… more
Date: December 1939
Creator: Rodert, Lewis A. & Jones, Alun R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Radiator Design and Installation

Description: "The fundamental principles of fluid flow, pressure losses, and heat transfer have been presented and analyzed for the case of a smooth tube with fully developed turbulent flow. These equations apply to tubes with large length-diameter ratios where the flow is at a high Reynolds Number. The error introduced by using these equations increases as the magnitude of the tube length and the air-flow Reynolds Number approaches the values encountered in modern radiator designs" (p. 1).
Date: May 1939
Creator: Brevoort, M. J. & Leifer, M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An Electrical-Type Indicating Fuel Flowmeter

Description: "An electrical-type meter has been developed for measuring mass rates of flow of gasoline or other nonconducting fluids. Its temperature dependence is small over a large range and it has no known vibrational or viscosity errors. The maximum temperature rise is less than 5 C. The rates of flow, measurable within 1% with the present instrument, are approximately 100 to 1,000 or more pounds of gasoline per hour when a potentiometer is used, or 100 to 300 pounds per hour when a deflection-type mete… more
Date: September 1939
Creator: Tozier, Robert E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Preliminary Full-Scale Wind-Tunnel Investigation of Wing Ducts for Radiators, Special Report

Description: "Wing ducts for liquid-cooled engine radiators have been investigated in the N.A.C.A. full-scale wind tunnel on a large model airplane. The tests were made to determine the relative merits of several types of duct and radiator installations for an airplane of a particular design. In the test program the principal duct dimensions were systematically varied, and the results are therefore somewhat applicable to the general problems of wing duct design, although they should be considered as prelimi… more
Date: March 1938
Creator: Silverstein, Abe & Nickle, F. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Pressure Distribution on the Fuselage of a Midwing Airplane Model at High Speeds

Description: "The pressure distribution on the fuselage of a midwing airplane model was measured in the NACA 8-foot high speed wind tunnel at speeds from 140 to 440 miles per hour for lift coefficients ranging from -0.2 to 1.0. The primary purpose of the tests was to provide data showing the air pressures on various parts of the fuselage for use in structural design. The data may also be used for the design of scoops and vents. The results show that the highest negative pressures occurred near the wing and … more
Date: November 1939
Creator: Delano, James B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Tandem Air Propellers

Description: Report discussing tests of 2-blade, adjustable-pitch, counterrotating tandem model propellers, adjusted to absorb equal power at maximum efficiency. The characteristics at several pitch settings and diameter spacings were compared with 2-blade and 4-blade propellers. Tandem propellers were found to have an advantage over single propellers at higher pitch settings.
Date: August 1937
Creator: Lesley, E. P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Stability of Castering Wheels for Aircraft Landing Gears, Special Report

Description: In many installations of castering rubber-tired wheels there is a tendency for the wheel to oscillate violently about the spindle axis. This phenomenon, popularly called 'shimmy,' has occurred in some airplane tail wheels and has been corrected in two ways: first by the application of friction in the spindles of the tail wheels; and, second, by locking the wheels while taxiing at high speeds. Shimmy is common with the large wheels used as nose wheels in tricycle landing gears and, since it is i… more
Date: September 1937
Creator: Kantrowitz, Arthur
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Large-Scale Boundary-Layer Control Tests on Two Wings in the NACA 20-Foot Wind Tunnel, Special Report

Description: Report discussing tests performed on two different wings to determine the increase in lift obtainable by removing the boundary layer and power required for the blower. The results for the stub wing were more favorable than the large-span wing.
Date: April 1935
Creator: Freeman, Hugh B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Comparison of Three Exit-Area Control Devices on an N.A.C.A. Cowling, Special Report

Description: "Adjustable cowling flaps, an adjustable-length cowling skirt, and a bottom opening with adjustable flap were tested as means of controlling the rate of cooling-air flow through an air-cooled radial-engine cowling. The devices were tested in the NACA 20-foot tunnel on a model wing-nacelle-propeller combination, through an airspeed range of 20 to 80 miles per hour, and with the propeller blade angle set 23 degrees at 0.75 of the tip radius. The resistance of the engine to air flow through the co… more
Date: May 1940
Creator: McHugh, James G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Resume of Present Data on Load Distribution on Slots and Flaps, Special Report

Description: This report covers a study of the generally available data on load distribution on slots and flaps. The study was made by the National Advisory Committee for Aeronautics at the request of the Material Division, Army Air Corps to furnish information applicable to design criteria for slots and flaps of various types. The data are presented in three main sections: slots (Handley page type), auxiliary airfoils (fixed), and flaps.
Date: April 1934
Creator: Wenzinger, Carl J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation of the Lift Characteristics of an NACA 27-212 Airfoil Equipped With Two Types of Flap, Special Report

Description: "An investigation has been made in the NACA 7- by 10-foot wind tunnel of a large chord NACA 27-212 airfoil with a 20% chord split flap and with two arrangements of a 25.66% chord slotted flap to determine the section lift characteristics as affected by flap deflection for the split flap and as affected by flap deflection, flap position, and slot shape for the slotted flap. For the two arrangements of the slotted flap, the flap positions for maximum section lift are given. Comparable data on the… more
Date: September 1940
Creator: Swanson, Robert S. & Schuldenfrei, Marvin J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Preliminary Model Tests of a Wing-Duct Cooling System for Radial Engines, Special Report

Description: "Wind-tunnel tests were conducted on a model wing-nacelle combination to determine the practicability of cooling radial engines by forcing the cooling air into wing-duct entrances located in the propeller slipstream, passing the air through the engine baffles from rear to front, and ejecting the air through an annular slot near the front of the nacelle. The drag of the cowlings tested was definitely less than for the conventional N.A.C.A. cowling, and the pressure available at low air speed cor… more
Date: February 1939
Creator: Biermann, David & Valentine, E. Floyd
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Drag of Several Gunner's Enclosures at High Speeds

Description: "The drag of several types of gunner's turrets, windshields, blisters, and other protuberances, including projecting guns, was investigated at speeds from 75 to 440 miles per hour in the NACA 8-foot high-speed wind tunnel. The various gunner's enclosures were represented by 1/10 and 1/7 full-size models on a midwing-fuselage combination representative of bomber types. Most of the usual types of retractable turrets are very poor aerodynamically; they caused wind drag increments, dependent upon t… more
Date: July 1941
Creator: Stack, John & Moberg, Richard J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Relative Efficiencies and Design Charts for Various Engine-Propeller Combinations, Special Report

Description: "The relative efficiencies of various engine-propeller combinations were the subject of a study that covered the important flight conditions, particularly the take-off. Design charts that graphically correlate the various propeller parameters were prepared to facilitate the solution of problems and also to clarify the conception of the relationships of the various engine-propeller design factors. It is shown that, among the many methods for improving the take-off thrust, the use of high-pitch, … more
Date: September 1936
Creator: Biermann, David
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen