National Advisory Committee for Aeronautics (NACA) - 1,263 Matching Results

Search Results

prev Results: 49 - 72 next
open access

The Analysis of Strains Indicated by Multiple-Strand Resistance-Type Wire Strain Gages Used as Rosettes

Description: "Methods are given for making the necessary corrections to the strains indicated by multiple-strand resistance-type wire strain gages used singly or as rosettes to measure strains at an angle to the principal strain. The results of tests to determine the validity of the methods of correction are reported" (p. 1).
Date: January 1943
Creator: Dow, Norris F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An analysis of the effect of core structure and performance on volume and shape of cross-flow tubular intercoolers

Description: From Introduction: "The purpose of this paper is to show, in a similar manner, the effect of change in the core structure of the tubular intercooler on the over-all dimensions when the operating conditions are fixed."
Date: December 1942
Creator: Reuter, J. George & Valerino, Michael F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An analysis of the fatigue life of an airplane wing structure under overload conditions

Description: From Introduction: "Fatigue life expectancy in normal transport operations was investigated in reference 1 and was found to be of equal importance with single-gust life. The effect of overload operation of transport airplanes on the probability of encountering single critical gusts was investigated in reference 2 and the frequency of critical gusts was found to increase rapidly with overload. The effect of overload operation on fatigue strength, however, has not heretofore been evaluated, hence… more
Date: February 1946
Creator: Putnam, Abbott A. & Reisert, Thomas D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An analysis of the indications of the University of Chicago airborne turbulence indicator in gusty air

Description: From Introduction: "The present report has been prepared to discuss the indications obtained from the University of Chicago turbulence indicator in relation to simultaneous measurement of atmospheric gustiness made by the NACA, which are summarized herein."
Date: August 1946
Creator: Tolefson, H. B. & Pratt, K. G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An analysis of the skipping characteristics of some full-size flying boats

Description: From Introduction: "The purpose of this report is to gather together in one place information on the skipping characteristics of number of flying boats. A graph showing the influence of the hull form on the skipping characteristics is given which should be useful in laying out the proportions of the hull in preliminary design to insure good landing behavior."
Date: January 1946
Creator: Locke, F. W. S., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Analysis of V-G Records from the SNB-1 Airplane

Description: Availability data obtained on SNB-1 trainer-class airplanes were analyzed and results presented as flight envelopes which predict occurrences of large values of air speed and acceleration. Comparison is made with SNJ-4 trainer-class airplane data analyzed by the same method. It is concluded that flight envelopes are satisfactory; that the two types show large differences in flight loads and speeds experience; and that SNB-1 will seldom, if ever, exceed design limit load factor and restricted sp… more
Date: July 1946
Creator: Walker, Walter G. & Meadows, May T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Analysis of V-G Records From the SNJ-4 Airplane

Description: Report discusses an attempt to adapt a method of analysis of V-G data to predict the occurrences of large values of airspeed and acceleration from an SNJ-4 airplane; the data are presented as "flight envelopes". The flight envelopes "predict that, on average, in a stated number of flight hours, one airspeed, one positive acceleration, and one negative acceleration will exceed the envelope with equal probability of the accelerations being experienced at any airspeed" (from Discussion). The analy… more
Date: December 1945
Creator: Wilkerson, M. & Bennett, S. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Analysis of Vertical-Tail Loads in Rolling Pull-Out Maneuvers

Description: Bulletin presenting an analysis of the vertical-tail loads to be expected as a result of abrupt aileron action in accelerated flight, as in rolls from turns or pull-outs, for example. Critical tail loads may occur in rolling pull-out maneuvers, particularly on airplanes with good ailerons and low directional stability.
Date: August 1944
Creator: Gilruth, Robert R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Analysis of Wind-Tunnel Stability and Control Tests in Terms of Flying Qualities in Full-Scale Airplanes

Description: From Summary: "The analysis of results of wind-tunnel stability and control tests of powered airplane models in terms of the flying qualities of full-scale airplanes is advocated. In order to indicate the topics upon which comments are considered desirable in the report of a wind-tunnel stability and control investigation and to demonstrate the nature of the suggested analysis, the present NACA flying-qualities requirements are discussed in relation to wind-tunnel tests. General procedures for … more
Date: October 1943
Creator: Kayten, Gerald G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An Analytical Investigation of the Effects of Elevator-Fabric Distortion on the Longitudinal Stability and Control of an Airplane

Description: From Summary: "The results of an analytical investigation to determine the qualitative effects of elevator-fabric distortion on the stick-force characteristics of an airplane are presented. These results indicate that serious alteration of intended stick-force characteristics can be produced by elevator-fabric distortion."
Date: May 1944
Creator: Mathews, Charles W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An analytical study of wing and tail loads associated with an elevator deflection

Description: From Introduction: "The present paper covers step 1 of the outlined investigation, includes methods of computing the variation of wing and tail loads, and gives numerical results of the application of the theory to the BT-9B airplane. Finally, theoretical formulas are developed and charts are given for computing the maximum increments of wing load, the down-tail load, and the up-tail load following a given elevator displacement."
Date: June 1941
Creator: Pearson, H. A. & Garvin, J. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Application of a numerical procedure to stress analysis of stringer-reinforced panels

Description: From Introduction: "In the present paper a numerical procedure for the stress analysis of flat-sheet and stringer combinations of arbitrary construction and loading is presented and applied to axially loaded panels and to the reinforced covers of box beams."
Date: March 1945
Creator: Kempner, Joseph
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Application of Balancing Tabs to Ailerons

Description: Analysis was made to determine characteristics required of a balancing-tab system for ailerons in order to reduce aileron stick forces to any desired magnitude. Series of calculations based on section data were made to determine balancing-tab systems of various chord tabs and ailerons that will give, for a particular airplane, zero rate of aileron hinge moment with aileron deflection and yet will produce same maximum rate of roll as a plain unbalanced 15-percent chord aileron of same span. Effe… more
Date: June 1942
Creator: Sears, Richard I.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The application of data on strength under repeated stresses to the design of aircraft

Description: From Summary: "This report suggests a method whereby information on the strength under repeated stresses of aircraft materials or structural parts can be used in conjunction with information on service loadings as a means of comparing alternative designs."
Date: October 1945
Creator: Jackson, L. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Application of Spring Tabs to Elevator Controls

Description: Report presenting equations for calculating the stick-force characteristics obtained with a spring-tab type of elevator control. The main problems encountered in the design of the satisfactory elevator spring tab are to provide stick forces in the desired range, to maintain the force per g sufficiently constant throughout the speed range, to avoid undesirable "feel" of the control in ground handling, and to prevent flutter.
Date: October 1944
Creator: Phillips, William H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An Approximate Determination of the Power Required to Move Control Surfaces as Related to Control-Booster Design

Description: "As a part of a general investigation of control boosters, preliminary calculations were made to indicate the sizes of control boosters necessary to move the controls of airplanes of various sizes. The analysis was based on the assumption that the controls were moved with a rapidity and amplitude equal to that measured with a fighter airplane in simulated combat. A corollary purpose consisted in determining the effect on reducing booster-power unit size of incorporating an energy accumulator in… more
Date: September 1945
Creator: Johnson, Harold I.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Approximate Formulas for the Computation of Turbulent Boundary-Layer Momentum Thicknesses in Compressible Flows

Description: Report presenting approximate formulas for the computation of the momentum thickness of turbulent boundary layers on two-dimensional bodies, on bodies of revolution at zero angle of attack, and on the inner surfaces of round channels all in compressible flow given in the form of integrals that can be conveniently computed. Results for skin-friction formulas, laminar boundary layers, and full thickness of boundary layer are provided.
Date: March 1946
Creator: Tetervin, Neal
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An Approximate Method of Shear-Lag Analysis for Beams Loaded at Right Angles to the Plane of Symmetry of the Cross Section

Description: Report discussing strain measurements made on a box beam of triangular cross section and on two beams of D-section under transverse bending. Information about the arrangement of the beams and experimental and calculated stresses for different boxes.
Date: September 1943
Creator: Kuhn, Paul & Brilmyer, Harold G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Artificial Running-in of Piston Rings

Description: Report presenting a consideration of the performance of sliding surfaces, such as piston rings, cylinders, journals, and bearings in aircraft engines with reference to the surface characteristics that they possess before and after running-in, prior to service operation. The phenomena accompanying the running-in process are analyzed.
Date: March 1944
Creator: Bobrowsky, A. R. & Machlin, E. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Attainment of a Straight-Line Trajectory for a Preset Guided Missile With Special Reference to Effect of Wind or Target Motion

Description: Report discusses the results of a study "of the requirements for the attainment of a straight-line trajectory for a preset guided missile in the presence of wind or target motion" (from Summary). Information about the straight-line trajectory, position of the launching airplane, straight-line collision course, and arrangement of the autopilot in the missile is provided. Recommendations are also made about the creation of a bombsight mounting for the pilot of the launching airplane in order to a… more
Date: August 1945
Creator: Ribner, Herbert S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen