Search Results

Advanced search parameters have been applied.
open access

Review of state-of-the-art of solar collector corrosion processes. Task 1 of solar collector studies for solar heating and cooling applications. Final technical progress report

Description: The state-of-the-art of solar collector corrosion processes is reviewed, and Task 1 of a current research program on use of aqueous heat transfer fluids for solar heating and cooling is summarized. The review of available published literature has indicated that lack of quantitative information exists relative to collector corrosion at the present time, particularly for the higher temperature applications of solar heating and cooling compared to domestic water heating. Solar collector systems ar… more
Date: April 11, 1980
Creator: Clifford, J E & Diegle, R B
Partner: UNT Libraries Government Documents Department
open access

ORR Operations for Period April 1961 to April 1962

Description: A summary of the activities in the 4th operational year is presented for the ORR. On-stream time at 30 Mw was relatively steady with 75.4 and 83.7% representing the lowest and highest quarters. Modification of the ball-latch mechanism of the shim-rod-drives is in progress. The primary cooling system bypass control valve was modified and a d-c pony motor was added at the No. 3 primary pump. This addition was made to increase the reliability of adequate water flow for afterheat cooling. A study o… more
Date: October 16, 1962
Creator: Binford, F.T.; Casto, W.R. & Colomb, A.L.
Partner: UNT Libraries Government Documents Department
open access

Cryogenic supplies for the TFTR neutral beam line cryopanels

Description: Cryocondensing panels will be used for the Neutral Beam Lines of the TFTR to satisfy a pumping speed requirement of 2.5 x 10/sup 6/ l/s. The cryocondensing panels are fed by liquid helium (LHe), boiling at selectable temperatures of 4.5/sup 0/K or 3.8/sup 0/K. Liquid nitrogen (LN/sub 2/) panels and chevrons thermally shield the LHe panel. The closed-loop LHe supply system and the open loop LN/sub 2/ system are discussed. The helium refrigerator of minimum 1070-W capacity, together with its dist… more
Date: January 1, 1977
Creator: Pinter, G.
Partner: UNT Libraries Government Documents Department
open access

Solar hot water system installed at Days Inn Motel, Jacksonville, Florida

Description: The solar energy hot water system installed in the Days Inns of America, Inc., Days Inn Motel (120 rooms) I-95 and Cagle Road, Jacksonville, Florida, is described. The solar system was designed by ILI, Incorporated to provide 65 percent of the hot water demand. The system is one of eleven systems planned under this grant. Water (in the Solar Energy Products, Model CU-30ww liquid flat plate collector (900 square feet) system) automatically drains into the 1000 gallon lined and vented steel stora… more
Date: September 1, 1980
Partner: UNT Libraries Government Documents Department
open access

Confirmation test for gas/slurry flow in SRC-I coal liquefaction process. Internal R and D final report

Description: The overall objective of program 12.11.1 was to provide data needed to confirm the design of the transport system, slurry heat exchangers, and slurry feed manifolds for the SRC-I Demonstration Plant. Because of lack of funds, the program was terminated before most of the work was completed. Two studies related to distribution of two-phase flow in the heat exchanger tubes were finished. A special system was designed to measure slurry concentration and flow rate in different tubes. Results showed… more
Date: September 1, 1983
Creator: Moujaes, S.F.
Partner: UNT Libraries Government Documents Department
open access

Design of a continuous duty cryopump

Description: A continuous duty cryopump system was designed and developed that comprises a self-contained cryopump for installation into a vacuum chamber, and a microprocessor controller for automatic operation. This deuterium pump has two units in a single housing, arranged so that one is pumping while the other is being regenerated. Liquid helium-cooled, finned sections in each unit pump deuterium by condensation, and a third pump integral within the cryopump housing collects the regenerated gas. A microp… more
Date: May 1, 1985
Creator: Sedgley, D.W.
Partner: UNT Libraries Government Documents Department
open access

Pumping behavior of sputter ion pumps

Description: The ultrahigh vacuum requirements of ISABELLE is obtained by distributed pumping stations. Each pumping station consists of 1000 l/s titanium sublimation pump for active gases (N/sub 2/, H/sub 2/, O/sub 2/, CO, etc.), and a 20 l/s sputter ion pump for inert gases (methane, noble gases like He, etc.). The combination of the alarming production rate of methane from titanium sublimation pumps (TSP) and the decreasing pumping speed of sputter ion pumps (SIP) in the ultrahigh vacuum region (UHV) lea… more
Date: unknown
Creator: Chou, T S & McCafferty, D
Partner: UNT Libraries Government Documents Department
open access

Feasibility demonstration of the Sperry down-well pumping system. Final report

Description: Advantages of down-well pumping (vs. free-flowing) of geothermal hot-water wells are presented, and criteria for such a system are discussed. The main body of the report is presented under the following section headings: the Sperry down-well pumping system; field test program; field operations; test results; and, conclusions and recommendations. The appendix includes a summary of boiler heat transfer and pressure drop calculations. (JGB)
Date: May 1, 1977
Partner: UNT Libraries Government Documents Department
open access

Effect of reactor coolant pumps following a small break in a pressurized water reactor

Description: Small-break loss-of-coolant accidents were calculated to help determine whether to trip the reactor-coolant pumps early in the accident when the reactor scrams or to delay the pump trip (pump trip times ranged from 450 s to no trip at all). Four-in.-diam (approximate) cold-leg breaks in Babcock and Wilcox (B and W) and Westinghouse (W) pressurized-water reactors were investigated using the Transient Reactor Analysis Code, TRAC-PD2. The results indicated that for a 4-in.-diam cold-leg break the … more
Date: January 1, 1982
Creator: Elliott, J.L.; Lime, J.F. & Willcutt, G.J.E. Jr.
Partner: UNT Libraries Government Documents Department
open access

Kilowatt Isotope Power System: component test report for the ground demonstration system pump. 77-KIPS-99

Description: The purpose of this test was to demonstrate that the pump utilized for the developmental program to be conducted on the Kilowatt Isotope Power System (KIPS) fulfilled the requirements of Test Procedure 398A, Component Test Procedure for the Ground Demonstration System Pump. The results of the tests are reported. From these results it was concluded that the pump for the Kilowatt Isotope Power System has satisfactorily completed the requirements of Sundstrand Pump Test Procedure, TP 398A.
Date: February 8, 1978
Creator: Brainard, E.L.
Partner: UNT Libraries Government Documents Department
open access

CRBRP sodium circulating pump design evaluation

Description: The following topics are discussed: (1) primary sodium pump design concept; (2) pump level control system; (3) resolution of design problems in stress analysis, dynamics analysis, and mechanical design; (4) model testing; (5) planned performance tests; and (6) fabrication status. (DG)
Date: December 1, 1977
Creator: Marrujo, F.; Cook, M.; Manners, L. & Cothran, H.
Partner: UNT Libraries Government Documents Department
open access

EXPERIMENTAL MEASUREMENTS OF THE SUCTION HEAD REQUIRED BY THE HALLAM PROTOTYPE FREE SURFACE SODIUM PUMP

Description: Hydraulic tests were made on the Hallam Prototype Free-Surface Sodium Pump to determine the net positive suction head (NPSH) required at various sodium flow rates. Pump performance data were also collected. The results indicate that an NPSH of 22 ft sodium is required at the design flow rate of 7200 gpm at approximates 1000 deg F, agreeing with computed values, and that the pump is designed with a safety margin of slightly over l0%. (D.L.C.)
Date: July 25, 1961
Creator: Atz, R.W.
Partner: UNT Libraries Government Documents Department
open access

Centrifugal slurry pump wear and hydraulic studies. Phase II report. Experimental studies

Description: This report describes the work performed by Ingersoll-Rand Research, Inc., under Phase II, Experimental Studies for the contract entitled, Centrifugal Slurry Pump Wear and Hydraulic Studies. This work was carried out for the US Department of Energy under Contract No. DE-AC-82PC50035. The basic development approach pursued this phase is presented, followed by a discussion on wear relationships. The analysis, which resulted in the development of a mathematical wear model relating pump life to som… more
Date: January 1, 1983
Creator: Mistry, D.; Cooper, P.; Biswas, C.; Sloteman, D. & Onuschak, A.
Partner: UNT Libraries Government Documents Department
open access

Shale fracturing injections at Oak Ridge National Laboratory: 1977-1979 series

Description: Intermediate-level waste solution generated at ORNL is periodically mixed with a cement-base blend of dry solids and injected into an impermeable shale formation at an approximate depth of 240 m (800 ft). The grout mix sets shortly after the injection, permanently fixing the radionuclides in the shale formation. A series of four injections of intermediate-level waste solution was made between 1977 and 1979. A total of 1.2 million l (314,000 gal) of waste solution containing 81,780 Ci of radionu… more
Date: September 1, 1980
Creator: Weeren, H.O.
Partner: UNT Libraries Government Documents Department
open access

Performance of BNL-TSTA compound cryopump

Description: A compound cryopump using cryocondensation pumping for hydrogen isotopes and cryosorption pumping with coconut charcoal as adsorbent for helium was designed. This compound cryopump was subsequently built (by Janis Research, Stoneham, MA) and has been tested at Brookhaven, fulfilling the design requirements and are delivered to Tritium Systems Test Assembly (TSTA) Vacuum Facility at Los Alamos Scientific Laboratory (LASL) for on-line operations.
Date: January 1, 1980
Creator: Hseuh, H. C. & Worwetz, H. A.
Partner: UNT Libraries Government Documents Department
open access

Thermal-Stress and Strain-Fatigue Analyses of the MSRE Fuel and Coolant Pump Tanks

Description: Thermal-stress and strain-fatigue analyses of the MSRE fuel and coolant pump tanks were completed for determining the quantity of coollng air required to obtain the maximum life of the pump tanks and to determine the acceptability of the pump tanks for the intended service of 100 heating cycles from room temperature to 1200 deg F and 500 reactor power-change cycles from zero to 10 Mw. A cooling-air flow rate of 200 cfm for the fuel pump tank was found to be an optimum value that provided an amp… more
Date: October 1, 1962
Creator: Gabbard, C.G.
Partner: UNT Libraries Government Documents Department
open access

Solar photovoltaic applications seminar: design, installation and operation of small, stand-alone photovoltaic power systems

Description: This seminar material was developed primarily to provide solar photovoltaic (PV) applied engineering technology to the Federal community. An introduction to photoconductivity, semiconductors, and solar photovoltaic cells is included along with a demonstration of specific applications and application identification. The seminar details general systems design and incorporates most known information from industry, academia, and Government concerning small solar cell power system design engineering… more
Date: July 1, 1980
Partner: UNT Libraries Government Documents Department
open access

Vacuum system problems of EBT: a steady-state fusion experiment

Description: Many of the vacuum problems faced by EBT will soon be shared by other plasma devices as high-power microwave systems and long pulse lengths become more common. The solutions used on EBT (such as the raised lip with elastomer seal) are not unique; however, experience has shown that microwave-compatible designs must be carefully thought out. All details of the vacuum must be carefully thought out. All details of the vacuum must be carefully screened in advance to insure that microwaves do not lea… more
Date: January 1, 1981
Creator: Livesey, R.L.
Partner: UNT Libraries Government Documents Department
open access

Explosion potential of neutral-beam source cryopumps for TFTR

Description: The explosion potential of the test cryopump became a paramount issue in the safety analysis required for the reactor experiment. The administrative limit for loading of the cryopump with normal hydrogen or deuterium is that amount of gas which will produce a partial pressure of 13 torr at a total pressure of 1 atmosphere, i.e., a 1.7% mixture by volume. At atmospheric pressure, combustion can occur for mixtures in the range 4.0 to 75%. It is important to know whether, in a leak-up-to-air accid… more
Date: December 1, 1977
Creator: Graham, W. G.; Lim, T. H. & Ruby, L.
Partner: UNT Libraries Government Documents Department
open access

TITANIUM PUMP LOOP FOR AQUEOUS SOLUTIONS AT HIGH TEMPERATURES

Description: A titanium pump loop, designed to circulate aqueous solutions at temperatures and pressures up to 370 deg C and 3000 psia, was constructed. It is to be used to study the chemical stability of uranyl sulfate fuel solutions of interest to the Fluid Fuels Reactor Program. The total loop voluime was minimized so that about 2 liters uf solution was sufficient for loop operation. The equipment includes a sampling system to remove solution samples from the loop while operating at elevated temperature … more
Date: December 13, 1961
Creator: Baker, J.M. & Bolt, S.E.
Partner: UNT Libraries Government Documents Department
open access

Energy conservation in ice skating rinks

Description: An economic and energy analysis of ice rinks was made to examine the areas in which energy could be profitably conserved. The areas where new equipment could make a major reduction in energy use are: the use of waste heat for space heating, the installation of a low emissivity false ceiling to reduce radiant heat, the use of a load cycling controller to reduce refrigeration costs, and the installation of more efficient lighting systems. Changes in rink operating procedure that could cut energy … more
Date: January 1, 1980
Creator: Dietrich, B.K. & McAvoy, T.J.
Partner: UNT Libraries Government Documents Department
open access

Sperry Low Temperature Geothermal Conversion System, Phase I and Phase II. Volume V. Component development. Final report

Description: The fundamental inventions which motivate this program are system concepts centered on a novel heat engine cycle and the use of downwell heat exchange. Here, the primary emphasis is on downwell hardware. The only surface equipment included is the surface portion of the instrumentation and control systems. Downwell instrumentation is reported. Downwell conduits and techniques for installing, connecting and sealing them are covered. The downwell turbine-pump unit (TPU) is a critical component sin… more
Date: January 1, 1984
Creator: Harvey, C.; McBee, W. & Matthews, H.B.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen