Search Results

Advanced search parameters have been applied.
open access

Microstructural and solidification cracking evaluation of electron beam welds in 304L

Description: Weld hot cracking of stainless steels is a major materials-related problem in the welding industry. This present investigation evaluates the crack susceptibility of highly-constrained EB welds made in materials whose DeLong ferrite potentials range from zero to nine FN. In addition, the effect of piece part strength level on cracking is examined. This study has revealed that these deep penetration EB welds have regions that solidify as primary austenite, even when the DeLong ferrite potential i… more
Date: January 1, 1991
Creator: Sturgill, P.L.; Campbell, R.D. & Henningsen, J.L.
Partner: UNT Libraries Government Documents Department
open access

Meteorological conditions during the winter validation study at Rocky Flats, Colorado: An overview

Description: The objective for the Winter Validation Study was to gather field data for validation of the Terrain-Responsive Atmospheric Code (TRAC) under winter time meteorological conditions. Twelve tracer tests were conducted during a two-week period in February 1991. Each test lasted 12 hours, with releases of SF{sub 6} tracer from the Rocky Flats Plant near Golden, Colorado. The tests included ground-based and airborne sampling to 16 km from the release point. This presentation summarizes meteorologica… more
Date: November 6, 1991
Creator: Hodgin, C.R.
Partner: UNT Libraries Government Documents Department
open access

EG G sampling program results FY 1989

Description: Thirty-three waste drums were returned to Rocky Flats in support of EG G Idaho's quality control program for the Stored Waste Examination Pilot Plant. The drums were opened and examined in the size reduction facility at the Rocky Flats Plant. Contents of each drum were consistent with the Item Description Codes; however, four sludge drums and one combustible drum contained free liquids. These five drums failed to meet the Waste Isolation Pilot Plant and the Department of Transporation criteria.… more
Date: June 21, 1991
Creator: Watson, L.E.
Partner: UNT Libraries Government Documents Department
open access

Workshop Report: Precision Joining Center

Description: A workshop to obtain input from industry on the establishment of the Precision Joining Center (PJC) was held on July 10--12, 1991. The PJC is a center for training Joining Technologists in advanced joining techniques and concepts in order to promote the competitiveness of US industry. The center will be established as part of the DOE Defense Programs Technology Commercialization Initiative, and operated by EG G Rocky Flats in cooperation with the American Welding Society and the Colorado School… more
Date: August 1991
Creator: Powell, J. W. & Westphal, D. A.
Partner: UNT Libraries Government Documents Department
open access

Critical parameters and TCLP performance of the RFP microwave solidification system

Description: Two series of experiments were conducted at Rocky Flats Plant (RFP) to identify the critical operating parameters for microwave solidification and to evaluate the performance of the product against the EPA's Toxicity Characteristic Leach Procedure (TCLP). A surrogate hydroxide coprecipitation sludge spiked with heavy metals was used in the study. The RFP process uses microwave energy to heat and melt the waste into a vitreous final form that is suitable for land disposal. The results of the stu… more
Date: January 1, 1993
Creator: Sprenger, G.S.
Partner: UNT Libraries Government Documents Department
open access

Low-cost teleoperator-controlled vehicle for damage assessment and radiation dose measurement

Description: A low-cost, disposable, radio-controlled, remote-reading, ionizing radiation and surveillance teleoperator re-entry vehicle has been built. The vehicle carries equipment, measures radiation levels, and evaluates building conditions. The basic vehicle, radio control with amplifiers, telemetry, elevator, and video camera with monitor cost less than $2500. Velcro-mounted alpha, beta-gamma, and neutron sensing equipment is used in the present system. Many types of health physics radiation measuring… more
Date: January 1, 1991
Creator: Tyree, W.H.
Partner: UNT Libraries Government Documents Department
open access

Application of molten salts in pyrochemical processing of reactive metals

Description: Various mixes of chloride and fluoride salts are used as the media for conducting pyrochemical processes in the production and purification of reactive metals. These processes generate a significant amount of contaminated waste that has to be treated for recycling or disposal. Molten calcium chloride based salt systems have been used in this work to electrolytically regenerate calcium metal from calcium oxide for the in situ reduction of reactive metal oxides. The recovery of calcium is charact… more
Date: January 1, 1992
Creator: Mishra, B.; Olson, D.L. (Colorado School of Mines, Golden, CO (United States). Kroll Inst. for Extractive Metallurgy) & Averill, W.A. (EG and G Rocky Flats, Inc., Golden, CO (United States). Rocky Flats Plant)
Partner: UNT Libraries Government Documents Department
open access

The Rocky Flats Plant Waste Stream and Residue Identification and Characterization Program (WSRIC): Progress and achievements

Description: The Waste Stream and Residue Identification and Characterization (WSRIC) Program, as described in the WSRIC Program Description delineates the process knowledge used to identify and characterize currently-generated waste from approximately 5404 waste streams originating from 576 processes in 288 buildings at Rocky Flats Plant (RFP). Annual updates to the WSRIC documents are required by the Federal Facilities Compliance Agreement between the US Department of Energy, the Colorado Department of He… more
Date: February 1, 1994
Creator: Ideker, V. L. & Doyle, G. M.
Partner: UNT Libraries Government Documents Department
open access

Polymer solidification of mixed wastes at the Rocky Flats Plant

Description: The Rocky Flats Plant is pursuing polymer solidification as a viable treatment option for several mixed waste streams that are subject to land disposal restrictions within the Resource Conservation and Recovery Act provisions. Tests completed to date using both surrogate and actual wastes indicate that polyethylene microencapsulation is a viable treatment option for several mixed wastes at the Rocky Flats Plant, including nitrate salts, sludges, and secondary wastes such as ash. Treatability st… more
Date: February 1, 1994
Creator: Faucette, A. M.; Logsdon, B. W.; Lucerna, J. J. & Yudnich, R. J.
Partner: UNT Libraries Government Documents Department
open access

Isotopic ratio method for determining uranium contamination

Description: The presence of high concentrations of uranium in the subsurface can be attributed either to contamination from uranium processing activities or to naturally occurring uranium. A mathematical method has been employed to evaluate the isotope ratios from subsurface soils at the Rocky Flats Nuclear Weapons Plant (RFP) and demonstrates conclusively that the soil contains uranium from a natural source and has not been contaminated with enriched uranium resulting from RFP releases. This paper describ… more
Date: February 3, 1994
Creator: Miles, R. E. & Sieben, A. K.
Partner: UNT Libraries Government Documents Department
open access

Comparative risk analysis for the Rocky Flats Plant integrated project planning

Description: The Rocky Flats Plant is developing, with active stakeholder a comprehensive planning strategy that will support transition of the Rocky Flats Plant from a nuclear weapons production facility to site cleanup and final disposition. Final disposition of the Rocky Flats Plant materials and contaminants requires consideration of the interrelated nature of sitewide problems, such as material movement and disposition, facility and land use endstates, costs relative risks to workers and the public, an… more
Date: May 1, 1994
Creator: Jones, M. E. & Shain, D. I.
Partner: UNT Libraries Government Documents Department
open access

Safety analyses performed in the Systematic Evaluation Program at Rocky Flats

Description: Structures, systems, and components (SSC) at Rocky Flats were designed and put into operation before current standards and criteria applicable to these SSCs were developed. The purpose of the Systematic Evaluation Program (SEP) at Rocky Flats (RF) is to systematically compare the design of SSCs to current design requirements and assess the differences to assure that a balanced and integrated level of safety is achieved to support long-term operation of the facilities. The SEP is being performed… more
Date: June 1, 1994
Creator: Badwan, F. M.; Persinko, D. & Haga, P. B.
Partner: UNT Libraries Government Documents Department
open access

A research study to determine the effect of Total Quality Management (TQM) on employee morale in Plant Procedures Division at EG&G, Rocky Flats, Inc.

Description: EG&G at Rocky Flats, Golden, Colorado, experienced a high amount of low morale, due to the plant site having been designated to close, and the uneasiness of the working force was very visible. Some employees accepted early retirement in October 1992, however, all received letters of 120 days notice in March 1993, and were advised several cuts Would be made by October 1, 1993. This information alone caused many insecurities in employees, and caused morale to decrease even more. This is an in dep… more
Date: January 1, 1994
Creator: Casey, E. F.
Partner: UNT Libraries Government Documents Department
open access

Systematic Evaluation Program (SEP) at Rocky Flats Plant: An overview of practical management issues for evaluation of natural phenomena hazards

Description: Many of the buildings at the Rocky Flats Plant were designed and built before modern standards were developed, including standards for protection against extreme natural phenomenon such as tornadoes, earthquakes, and floods. The purpose of the SEP is to establish an integrated approach to assessing the design adequacy of specific high and moderate hazard Rocky Flats facilities from a safety perspective and to establish a basis for defining any needed facility improvements. The SEP is to be carr… more
Date: August 1, 1993
Creator: Badwan, F. M. & Herring, K. S.
Partner: UNT Libraries Government Documents Department
open access

Recommended plutonium release fractions from postulated fires. Final report

Description: This report was written at the request of EG&G Rocky Flats, Inc. in support of joint emergency planning for the Rocky Flats Plant (RFP) by EG&G and the State of Colorado. The intent of the report is to provide the State of Colorado with an independent assessment of any respirable plutonium releases that might occur in the event of a severe fire at the plant. Fire releases of plutonium are of interest because they have been used by EG&G to determine the RFP emergency planning zones. These zones … more
Date: December 1, 1993
Creator: Kogan, V. & Schumacher, P. M.
Partner: UNT Libraries Government Documents Department
open access

An investigation of gas separation membranes for reduction of thermal treatment emissions

Description: Gas permeable membranes were evaluated for possible use as air pollution control devices on a fluidized bed catalytic incineration unit. The unit is a candidate technology for treatment of certain mixed hazardous and radioactive wastes at the Rocky Flats Plant. Cellulose acetate and polyimide membranes were tested to determine the permeance of typical off-gas components such as carbon dioxide, nitrogen, and oxygen. Multi-component permeation studies included gas mixtures containing light hydroc… more
Date: May 16, 1994
Creator: Stull, D. M.; Logsdon, B. W. & Pellegrino, J. J.
Partner: UNT Libraries Government Documents Department
open access

Effect of internal heating during hot compression testing on the stress-strain behavior and hot working characteristics of Alloy 304L

Description: Temperature change from conversion of deformation to internal heat, and its effect on stress-strain behavior of alloy 304L was investigated by initially isothermal (temperature of specimen, compression dies, environment equilibrated at initiation of test) uniaxial compression. Strain rate was varied 0.01 s{sup {minus}1} to 1 s{sup {minus}1} (thermal state of specimen varied from nearly isothermal to nearly adiabatic). Specimens were deformed at 750 to 1150 to a strain of 1. Change in temperatur… more
Date: May 1, 1993
Creator: Mataya, M. C. & Sackschewsky, V. E.
Partner: UNT Libraries Government Documents Department
open access

On-site worker-risk calculations using MACCS

Description: We have revised the latest version of MACCS for use with the calculation of doses and health risks to on-site workers for postulated accidents at the Rocky Flats Plant (RFP) in Colorado. The modifications fall into two areas: (1) an improved estimate of shielding offered by buildings to workers that remain indoors; and, (2) an improved treatment of building-wake effects, which affects both indoor and outdoor workers. Because the postulated accident can be anywhere on plant site, user-friendly s… more
Date: May 1, 1993
Creator: Peterson, V. L.
Partner: UNT Libraries Government Documents Department
open access

Hydrogen peroxide safety issues

Description: A literature survey was conducted to review the safety issues involved in handling hydrogen peroxide solutions. Most of the information found in the literature is not directly applicable to conditions at the Rocky Flats Plant, but one report describes experimental work conducted previously at Rocky Flats to determine decomposition reaction-rate constants for hydrogen peroxide solutions. Data from this report were used to calculate decomposition half-life times for hydrogen peroxide in solutions… more
Date: April 14, 1993
Creator: Conner, W. V.
Partner: UNT Libraries Government Documents Department
open access

Cutting tool study: 21-6-9 stainless steel

Description: The Rocky Flats Plant conducted a study to test cermet cutting tools by performing machinability studies on War Reserve product under controlled conditions. The purpose of these studies was to determine the most satisfactory tools that optimize tool life, minimize costs, improve reliability and chip control, and increase productivity by performing the operations to specified Accuracies. This study tested three manufacturers` cermet cutting tools and a carbide tool used previously by the Rocky F… more
Date: July 29, 1992
Creator: McManigle, A. P.
Partner: UNT Libraries Government Documents Department
open access

Magnetic adsorbents for actinide and heavy metal removal from waste water

Description: Magnetic adsorbents can be applied to the treatment of waste water in various physical forms. For example, barium ferrite (BaO{center_dot}Fe{sub 2}O{sub 3}) has been used successfully as powder, granules or pellets. Iron ferrite, or magnetite, a naturally occurring ore, can also be used in much the same manner. However, natural magnetic needs activation to have the same capacity as freshly prepared ferrite. Furthermore, ferrites have been used solely in a batch mode because of their finely divi… more
Date: August 1, 1994
Creator: Kochen, R. L. & Navratil, J. D.
Partner: UNT Libraries Government Documents Department
open access

Risk perception on management of nuclear high-level and transuranic waste storage

Description: The Department of Energy`s program for disposing of nuclear High-Level Waste (HLW) and transuranic (TRU) waste has been impeded by overwhelming political opposition fueled by public perceptions of actual risk. Analysis of these perceptions shows them to be deeply rooted in images of fear and dread that have been present since the discovery of radioactivity. The development and use of nuclear weapons linked these images to reality and the mishandling of radioactive waste from the nations militar… more
Date: August 15, 1994
Creator: Dees, L. A.
Partner: UNT Libraries Government Documents Department
open access

Preliminary assessment of RTR and visual characterization for selected waste categories

Description: The first transuranic (TRU) waste shipped to the Waste Isolation Pilot Plant (WIPP) will be for the WIPP Experimental Program. The purpose of the Experimental Program is to determine the gas generation rates and potential for gas generation by the waste after it has been permanently stored at the WIPP. The first phase of these tests will be performed at WIPP with test bins that have been filled and sealed in accordance with the test plan for bin scale tests. A second phase of the testing, the A… more
Date: June 24, 1992
Creator: Ziegler, D. L.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen