Search Results

open access

Electrical thermometers for aircraft

Description: Electrical thermometers commonly used on aircraft are the thermoelectric type for measuring engine-cylinder temperatures, the resistance type for measuring air temperatures, and the superheat meters of thermoelectric and resistance types for use on airships. These instruments are described and their advantages and disadvantages enumerated. Methods of testing these instruments and the performance to be expected from each are discussed. The field testing of engine-cylinder thermometers is treated… more
Date: December 15, 1936
Creator: Peterson, John B. & Womack, S. H. J.
Partner: UNT Libraries Government Documents Department
open access

Heat Transfer to Fuel Sprays Injected Into Heated Gases

Description: This report presents the results of a study made of the influence of several variables on the pressure decrease accompanying injection of a relatively cool liquid into a heated compressed gas. Indirectly, this pressure decrease and the time rate of change of it are indicative of the total heat transferred as well as the rate of heat transfer between the gas and the injected liquid. Air, nitrogen, and carbon dioxide were used as ambient gases; diesel fuel and benzene were the injected liquids. T… more
Date: August 25, 1936
Creator: Selden, Robert F. & Spencer, Robert C.
Partner: UNT Libraries Government Documents Department
open access

A Theory for Primary Failure of Straight Centrally Loaded Columns

Description: "A theory of primary failure of straight centrally loaded columns is presented. It is assumed that the column cross section and the load are constant throughout the length. Primary failure is defined as any type of failure in which the cross sections are translated, rotated, or translated and rotated but not distorted in their own planes" (p. 141).
Date: August 17, 1936
Creator: Lundquist, Eugene E. & Fligg, Claude M.
Partner: UNT Libraries Government Documents Department
open access

The Rolling Friction of Several Airplane Wheels and Tires and the Effect of Rolling Friction on Take-Off

Description: This report presents the results of tests made to determine the rolling friction of airplane wheels and tires under various conditions of wheel loading, tire inflation pressure, and ground surface. The effect of wheel-bearing type was also investigated. Six pairs of wheels and tires were tested including two sizes of each of the types designated as standard (high pressure), low pressure, and extra low pressure. The results of calculations intended to show the effect of variations in rolling fri… more
Date: September 19, 1936
Creator: Wetmore, J. W.
Partner: UNT Libraries Government Documents Department
open access

Strength of Welded Aircraft Joints

Description: "This investigation is a continuation of work started in 1928 and described in NACA-TR-348 which shows that the insertion of gusset plates was the most satisfactory way of strengthening a joint. Additional tests of the present series show that joints of this type could be improved by cutting out the portion of the plate between the intersecting tubes. T and lattice joints in thin-walled tubing 1 1/2 by 0.020 inch have somewhat lower strengths than joints in tubing of greater wall thickness beca… more
Date: August 12, 1936
Creator: Brueggeman, W. C.
Partner: UNT Libraries Government Documents Department
open access

Span load distribution for tapered wings with partial-span flaps

Description: Tables are given for determining the load distribution of tapered wings with partial-span flaps placed either at the center or at the wing tips. Seventy-two wing-flap combinations, including two aspect ratios, four taper ratios, and nine flap lengths, are included. The distributions for the flapped wing are divided into two parts, one a zero lift distribution due primarily to the flaps and the other an additional lift distribution due to an angle of attack of the wing as a whole. Comparison bet… more
Date: November 21, 1936
Creator: Pearson, H. A.
Partner: UNT Libraries Government Documents Department
open access

Flight measurements of the dynamic longitudinal stability of several airplanes and a correlation of the measurements with pilots' observations of handling characteristics

Description: The dynamic longitudinal stability characteristics of eight airplanes as defined by the period and damping of the longitudinal oscillations were measured in flight to determine the degree of stability that may be expected in conventional airplanes. An attempt was made to correlate the measured stability with pilots' opinions of the general handling characteristics of the airplanes in order to obtain an indication of the most desirable degree of dynamic stability. The results of the measurements… more
Date: July 15, 1936
Creator: Soulé, Hartley A.
Partner: UNT Libraries Government Documents Department
open access

Blower Cooling of Finned Cylinders

Description: "Several electrically heated finned steel cylinders enclosed in jackets were cooled by air from a blower. The effect of the air conditions and fin dimensions on the average surface heat-transfer coefficient q and the power required to force the air around the cylinders were determined. Tests were conducted at air velocities between the fins from 10 to 130 miles per hour and at specific weights of the air varying from 0.046 to 0.074 pound per cubic foot. The fin dimensions of the cylinders cover… more
Date: November 14, 1936
Creator: Schey, Oscar W. & Ellerbrock, Herman H., Jr.
Partner: UNT Libraries Government Documents Department
open access

Fuel spray and flame formation in a compression-ignition engine employing air flow

Description: "The effects of air flow on fuel spray and flame formation in a high-speed compression-ignition engine have been investigated by means of the NACA combustion apparatus. The process was studied by examining high-speed motion pictures taken at the rate of 2,200 frames a second. The combustion chamber was of the flat-disk type used in previous experiments with this apparatus. The air flow was produced by a rectangular displacer mounted on top of the engine piston. Three fuel-injection nozzles were… more
Date: November 25, 1936
Creator: Rothrock, A. M. & Waldron, C. D.
Partner: UNT Libraries Government Documents Department
open access

Pressure-distribution measurements on O-2H airplane in flight

Description: "Results are given of pressure-distribution measurements made over two different horizontal tail surfaces and the right wing cellule, including the slipstream area, of an observation-type biplane. Measurements were also taken of air speed, control-surface positions, control-stick forces, angular velocities, and accelerations during various abrupt maneuvers. These maneuvers consisted of push-downs and pull-ups from level flight, dive pull-outs, and aileron rolls with various thrust conditions" (… more
Date: December 8, 1936
Creator: Pearson, H. A.
Partner: UNT Libraries Government Documents Department
open access

Full-scale tests of NACA cowlings

Description: A comprehensive investigation has been carried on with full-scale models in the NACA 20-foot wind tunnel, the general purpose of which is to furnish information in regard to the physical functioning of the composite propeller-nacelle unit under all conditions of take-off, taxiing, and normal flight. This report deals exclusively with the cowling characteristics under condition of normal flight and includes the results of tests of numerous combinations of more than a dozen nose cowlings, about a… more
Date: May 18, 1936
Creator: Theodorsen, Theodore; Brevoort, M. J. & Stickle, George W.
Partner: UNT Libraries Government Documents Department
open access

Cooling of airplane engines at low air speeds

Description: Report presents the results of a comprehensive experimental study carried out at full scale in the NACA 20-foot wind tunnel, the general purpose of which is to furnish information in regard to the functioning of the power plant and propeller unit under different conditions. This report deals particularly with the problem of the cooling of an airplane engines on the ground. The influence of different nose forms, skirts, flaps, propellers, spinners, and special blowers has been investigated.
Date: June 2, 1936
Creator: Theodorsen, Theodore; Brevoort, M. J. & Stickle, George W.
Partner: UNT Libraries Government Documents Department
open access

Characteristics of six propellers including the high-speed range

Description: This investigation is part of an extensive experimental study that has been carried out at full scale in the NACA 20-foot tunnel, the purpose of which has been to furnish information in regard to the functioning of the propeller-cowling-nacelle unit under all conditions of take-off, climbing, and normal flight. This report presents the results of tests of six propellers in the normal and high-speed flight range and also includes a study of the take-off characteristics.
Date: June 4, 1936
Creator: Theodorsen, Theodore; Stickle, George W. & Brevoort, M. J.
Partner: UNT Libraries Government Documents Department
open access

Cooling tests of a single-row radial engine with several NACA cowlings

Description: The cooling of a single-row radial air-cooled engine using several cowling arrangements has been studied in the NACA 20-foot wind tunnel. The results show the effect of the propeller and several cowling arrangements on cooling for various values of the indicated horsepower in the climb condition. A table giving comparative performance of the various cowling arrangements is presented. The dependence of temperature on indicated horsepower and pressure drop across the baffles is shown by charts. O… more
Date: August 20, 1936
Creator: Brevoort, M. J.; Stickle, George W. & Ellerbrock, Herman H., Jr.
Partner: UNT Libraries Government Documents Department
open access

Effect of nozzle design on fuel spray and flame formation in a high-speed compression-ignition engine

Description: "Fuel was injected from different type of injection nozzles into the combustion chamber of the NACA combustion apparatus, operated as a compression-ignition engine. High speed motion pictures were taken of the fuel sprays and combustion. Single-orifice nozzles of 0.008, 0.020, and 0.040 inch diameter, and multiorifice nozzles having 2, 6, and 16 orifices were tested. Nozzles having impinging jets and slit orifices were also included" (p. 327).
Date: March 19, 1936
Creator: Rothrock, A. M. & Waldron, C. D.
Partner: UNT Libraries Government Documents Department
open access

A simplified application of the method of operators to the calculation of disturbed motions of an airplane

Description: "A simplified treatment of the application of Heaviside's operational methods to problems of airplane dynamics is given. Certain graphical methods and logarithmic formulas that lessen the amount of computation involved are explained. The problem representing a gust disturbance or control manipulation is taken up and it is pointed out that in certain cases arbitrary control manipulations may be dealt with as though they imposed specific constraints on the airplane, thus avoiding the necessity of… more
Date: February 19, 1936
Creator: Jones, Robert T.
Partner: UNT Libraries Government Documents Department
open access

Air flow in the boundary layer near a plate

Description: From Summary: "The published data on the distribution of speed near a thin flat plate with sharp leading edge placed parallel to the flow (skin friction plate) are reviewed and the results of some additional measurements are described. The purpose of the experiments was to study the basic phenomena of boundary-layer flow under simple conditions."
Date: March 1936
Creator: Dryden, Hugh L.
Partner: UNT Libraries Government Documents Department
open access

Calculated and measured pressure distributions over the midspan section of the NACA 4412 airfoil

Description: Pressures were simultaneously measured in the variable-density tunnel at 54 orifices distributed over the midspan section of 5 by 30 inch rectangular model of the NACA 4412 airfoil at 17 angles of attack ranging from -20 degrees to 30 degrees at a Reynolds number of approximately 3,000,000. Accurate data were thus obtained for studying the deviations of the results of potential-flow theory from measured results. The results of the analysis and a discussion of the experimental technique are pres… more
Date: March 25, 1936
Creator: Pinkerton, Robert M.
Partner: UNT Libraries Government Documents Department
open access

Measurements of fuel distribution within sprays for fuel-injection engines

Description: Two methods were used to measure fuel distribution within sprays from several types of fuel-injection nozzles. A small tube inserted through the wall of an air tight chamber into which the sprays were injected could be moved about inside the chamber. When the pressure was raised to obtain air densities of 6 and 14 atmospheres, some air was forced through the tube and the fuel that was carried with it was separated by absorbent cotton and weighed. Cross sections of sprays from plain, pintle, mul… more
Date: April 8, 1936
Creator: Lee, Dana W.
Partner: UNT Libraries Government Documents Department
open access

Ground-Handling Forces on a 1/40-Scale Model of the U. S. Airship "Akron"

Description: This report presents the results of full-scale wind tunnel tests conducted to determine the ground-handling forces on a 1/40-scale model of the U. S. Airship "Akron." Ground-handling conditions were simulated by establishing a velocity gradient above a special ground board in the tunnel comparable with that encountered over a landing field. The tests were conducted at Reynolds numbers ranging from 5,000,000 to 19,000,000 at each of six angles of yaw between 0 degree and 180 degrees and at four … more
Date: 1936
Creator: Silverstein, Abe & Gulick, B. G.
Partner: UNT Libraries Government Documents Department
open access

Propulsion of a flapping and oscillating airfoil

Description: Formulas are given for the propelling or drag force experience in a uniform air stream by an airfoil or an airfoil-aileron combination, oscillating in any of three degrees of freedom; vertical flapping, torsional oscillations about a fixed axis parallel to the span, and angular oscillations of the aileron about a hinge.
Date: May 4, 1936
Creator: Garrick, I. E.
Partner: UNT Libraries Government Documents Department
open access

The quiescent-chamber type compression-ignition engine

Description: Report presents the results of performance tests of a single-cylinder 4-stroke-cycle compression-ignition engine having a vertical disk form of combustion chamber without air flow. The number, size, and direction of the orifices of the fuel-injection nozzles used were independently varied. A table and graphs are presented showing the performance of the engine with different nozzles; results of tests at different compression ratios, boost pressures, and coolant temperatures are also included.
Date: April 30, 1936
Creator: Foster, H. H.
Partner: UNT Libraries Government Documents Department
open access

Wing-nacelle-propeller interference for wings of various spans force and pressure-distribution tests

Description: Report presents the results of an experimental investigation made in the NACA full-scale wind tunnel to determine the effect of wing span on nacelle-propeller characteristics and, reciprocally, the lateral extent of nacelle and propeller influence on a monoplane wing. The results provide a check on the validity of the previous research on nacelles and propellers with 15-foot-span wings tested in the 20-foot wind tunnel and reported in technical reports 415, 462, 505, 506, and 507.
Date: April 21, 1936
Creator: Robinson, Russell G. & Herrnstein, William H., Jr.
Partner: UNT Libraries Government Documents Department
open access

The effect of lateral controls in producing motion of an airplane as computed from wind-tunnel data

Description: This report presents the results of an analytical study of the lateral controllability of an airplane in which both the static rolling and yawing moments supplied by the controls and the reactions due to the inherent stability of the airplane have been taken into account. The investigation was undertaken partly for the purpose of coordinating the results of a long series of wind-tunnel investigations with phenomena observed in flight tests; for this reason a hypothetical average airplane, embod… more
Date: April 20, 1936
Creator: Weick, Fred E. & Jones, Robert T.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen