Search Results

Aircraft Accidents: Method of Analysis
The revised report includes the chart for the analysis of aircraft accidents, combining consideration of the immediate causes, underlying causes, and results of accidents, as prepared by the special committee, with a number of the definitions clarified. A brief statement of the organization and work of the special committee and of the Committee on Aircraft Accidents; and statistical tables giving a comparison of the types of accidents and causes of accidents in the military services on the one hand and in civil aviation on the other, together with explanations of some of the important differences noted in these tables.
Airfoil Pressure Distribution Investigation in the Variable Density Wind Tunnel
Report presents the results of wind tunnel tests of pressure distribution measurements over one section each of six airfoils. Pressure distribution diagrams, as well as the integrated characteristics of the airfoils, are given for both a high and a low dynamic scale or, Reynolds number VL/V, for comparison with flight and other wind-tunnel tests, respectively. It is concluded that the scale effect is very important only at angles of attack near the burble.
The Design of Airplane Wing Ribs
"The purpose of this investigation was to obtain information for use in the design of truss and plywood forms, particularly with reference to wing ribs. Tests were made on many designs of wing ribs, comparing different types in various sizes. Many tests were also made on parallel-chord specimens of truss and plywood forms in place of the actual ribs and on parts of wing ribs, such as truss diagonals and sections of cap strips" (p. 223).
Aircraft Woods: Their Properties, Selection, and Characteristics
From Summary: "This report presents, further, information on the properties of various other native species of wood compared with spruce, and discusses the characteristics of a considerable number of them from the standpoint of their possible application in aircraft manufacture to supplement the woods that are now most commonly used."
Coefficients of Flow of Standard Nozzles
We first undertook experiments with air, devoted principally to the investigation of the disturbances due to the differences in the nature of the flow to the nozzle. The difficulty of measuring the air, however, caused us to experiment with water. Due to the possibility of measuring the capacity of the container, this method was much more accurate than measuring with Pitot tobes.
Collection of wind-tunnel data on commonly used wing sections
This report groups in a uniform manner the aerodynamic properties of commonly used wing sections as determined from tests in various wind tunnels. The data have been collected from reports of a number of laboratories. Where necessary, transformation has been made to the absolute system of coefficients and tunnel wall interference corrections have been applied. Tables and graphs present the data in the various forms useful to the engineer in the selection of a wing section.
Combating Airplane Fires
This report provides a summary of the important steps to be taken in combating airplane fires. Some considerations and ways of preventing fires from developing are provided.
Contribution to the Study of Normal Burning in Gaseous Carbureted Mixtures: Part 1
In the present study it is proposed to provide an equipment permitting the study of the propagation of the region of reaction in mixtures of air and carbureted gases enclosed within a cylinder. Ignition is produced at the end of compression by an electric spark. With this apparatus it is proposed to determine: 1) the influence of the richness of the explosive mixture on the rate of flame propagation; 2) the influence of the degree of volumetric compression on one of the hydrocarbons; 3) the influence of the variation of initial temperature of the mixture before compression; 4) the influence of tetraethyl-lead on the propagation - notably on the formation of the explosive wave.
Contribution to the Study of Normal Burning in Gaseous Carbureted Mixtures: Part 2
Memorandum presenting the experimental results of tests to confirm the contribution to the study of normal burning in gaseous carbureted mixtures.
Flight tests on U.S.S. Los Angeles. Part 2: stress and strength determination
From Summary: "The tests described in this report furnished data on the actual aerodynamic forces, and the resulting stresses and bending moments in the hull of the U. S. S. "Los Angeles" during as severe still-air maneuvers as the airship would normally be subjected to, and in straight flight during as rough air as is likely to occur in service, short of squall or storm conditions. The maximum stresses were found to be within the limits provided for in accepted practice in airship design. Normal flight in rough air was shown to produce forces and stresses about twice as great as the most severe still-air maneuvers."
Rate of Heat Transfer From Finned Metal Surfaces
The object was to evaluate the factors which control the rate of heat transfer to a moving current of air from finned metal surfaces similar to those used on aircraft engine cylinders. This was to establish data which will enable the finning of cooling surfaces to be designed to suit the particular needs of any specific application. Most of the work was done on flat copper specimens 6 inches square, upon which were mounted copper fins with spacings varying from 1/2 inch to 1/12 inch. All fins were 1 inch deep, 6 inches long, and .020 inch thick. The results of the investigation are given in the form of curves included here.
Structural Details of the Giant Dornier Seaplane "Do X."
Memorandum presenting a description of the Dornier seaplane Do X. Details of the general description, materials, details of the main wing and upper wing, details of the hull and of the wing stubs, tail surfaces and control lines, power plant, and launching car and floating dock are provided.
The Weymann-Lepère W.E.L. 10 Observation Airplane (French): A High-Wing Monoplane
Circular presenting a description of the Weymann-Lepère W.E.L. 10. Some of the characteristics described include the principles of the construction, aerodynamics, descriptions of the components, flight characteristics, and photographs and blueprints.
Back to Top of Screen