UNT Libraries Government Documents Department - 1,263 Matching Results

Search Results

prev Results: 41 - 64 next
open access

Compressible potential flow with circulation about a circular cylinder

Description: Report presenting the potential function for flow, with circulation, of a compressible fluid about a circular cylinder, which is obtained in series form including terms of the order of M(exp 4) where M is the Mach number of the free stream. The equations are used to obtain pressure coefficient as a function of Mach number at a point on the surface of the cylinder for different values of circulation.
Date: January 1944
Creator: Heaslet, Max A.
Item Type: Refine your search to only Report
open access

An Investigation of a Thermal Ice-Prevention System for a C-46 Cargo Airplane 2: The Design, Construction, and Preliminary Tests of the Exhaust-Air Heat Exchanger

Description: Report presenting an investigation of an exhaust-air heat exchanger, which has been designed, constructed, and flight-tested for a C-46 cargo airplane. The primary purpose of the investigation was to provide the C-46 airplane with a satisfactory source of heated air and to continue the development of the heat exchanger as a part of thermal ice-prevention equipment. Results indicated that the required thermal output and desired air-temperature rise have been achieved and that the exchanger is su… more
Date: February 1945
Creator: Jackson, Richard
Item Type: Refine your search to only Report
open access

The Propeller and Cooling-Air-Flow Characteristics of a Twin-Engine Airplane Model Equipped With NACA D(Sub S)-Type Cowlings and With Propellers of NACA 16-Series Airfoil Sections

Description: Report presenting an investigation in the 19-foot pressure tunnel to determine the nacelle drag, the cowling-air flow, and the propeller characteristics of a model of a high-performance military airplane. The model is fitted with NACA D(sub S)-type engine cowlings and with propellers embodying NACA 16-series airfoil sections. Results regarding the propeller characteristics, drag and cowling-air flow with the propeller removed, the effect of propeller on flow through cowling, and the influence o… more
Date: September 1944
Creator: McHugh, James G. & Pepper, Edward
Item Type: Refine your search to only Report
open access

Pressure drop in tank and float vent tubes on diving airplanes

Description: Report presenting an experiment regarding tank and float venting conditions that exist on diving airplanes undergoing rapid changes in altitude. The results indicated that large pressure differences build up between the outside and inside of tanks and floats on diving airplanes unless the correct size of venting tube is used.
Date: January 1939
Creator: Waldron, C. D.
Item Type: Refine your search to only Report
open access

Application of Spring Tabs to Elevator Controls

Description: Report presenting equations for calculating the stick-force characteristics obtained with a spring-tab type of elevator control. The main problems encountered in the design of the satisfactory elevator spring tab are to provide stick forces in the desired range, to maintain the force per g sufficiently constant throughout the speed range, to avoid undesirable "feel" of the control in ground handling, and to prevent flutter.
Date: October 1944
Creator: Phillips, William H.
Item Type: Refine your search to only Report
open access

On the Flow of a Compressible Fluid by the Hodography Method 2: Fundamental Set of Particular Flow Solutions of the Chaplygin Differential Equation

Description: Report presenting the utilization of the differential equation of Chaplygin's jet problem to give a systematic development of particular solutions of the hodograph flow equations, which extends the treatment of Chaplygin into the supersonic range and completes the set of particular solutions. The solutions serve to place on a reasonable basis the use of velocity correction formulas for the comparison of incompressible and compressible flows.
Date: November 1944
Creator: Kaplan, Carl
Item Type: Refine your search to only Report
open access

NACA Investigation of a Jet-Propulsion System Applicable to Flight

Description: "Following a brief history of the NACA investigation of jet-propulsion, a discussion is given of the general investigation and analyses leading to the construction of the jet-propulsion ground-test mock-up. The results of burning experiments and of test measurements designed to allow quantitative flight-performance predictions of the system are presented and correlated with calculations. These calculations are then used to determine the performance of the system on the ground and in the air at … more
Date: April 1944
Creator: Brown, Clinton E.
Item Type: Refine your search to only Report
open access

The effect of altitude on cooling

Description: Report presenting variables that control the cooling of liquid-cooled and air-cooled engines and then to show by illustrations how either engine may be cooled at any desired altitude. Cooling was found to not be the limiting factor in the design of high-altitude airplanes and was also not found to be a valid reason for selecting either liquid- or air-cooled engines for high-altitude operation.
Date: March 1943
Creator: Brevoort, Maurice J.; Joyner, Upshur T. & Wood, George P.
Item Type: Refine your search to only Report
open access

The effect of exhaust-stack shape on the design and performance of the individual cylinder exhaust-gas jet-propulsion system

Description: Report presenting tests on a single-cylinder, air-cooled engine to determine the effect of several different exhaust-stack shapes on the design and performance of the individual cylinder exhaust-gas jet-propulsion systems. Results regarding the effect of nozzle area and stack shape on exhaust-gas jet thrust, effect of nozzle area and stack shape on overall performance for the S-shape, the 90 degree bend, and the 180 degree bend, the effect on the shape on engine power and volumetric efficiency,… more
Date: November 1942
Creator: Turner, L. Richard & Humble, Leroy V.
Item Type: Refine your search to only Report
open access

Wind-Tunnel Procedure for Determination of Critical Stability and Control Characteristics of Airplanes

Description: "This report outlines the flight conditions that are usually critical in determining the design of components of an airplane which affect its stability and control characteristics. The wind-tunnel tests necessary to determine the pertinent data for these conditions are indicated, and the methods of computation used to translate these data into characteristics which define the flying qualities of the airplane are illustrated" (p. 1).
Date: April 1944
Creator: Goett, Harry J.; Jackson, Roy P. & Belsley, Steven E.
Item Type: Refine your search to only Report
open access

A method for calculating heat transfer in the laminar flow region of bodies

Description: Report presenting a practical method for determining the chordwise distribution of the rate of heat transfer from the surface of a wing or body of revolution to air. The method is limited to use to the determination of heat transfer fro the forward section of such bodies when the flow is laminar.
Date: December 1942
Creator: Allen, H. Julian & Look, Bonne C.
Item Type: Refine your search to only Report
open access

Nitrided-steel piston rings for engines of high specific power

Description: Report presenting testing of several designs of nitrided-steel piston rings under variable conditions of output. Testing indicated the importance of good surface finish and conformity of the ring to the bore. Results regarding temperature tests, single-cylinder-engine tests, and multicylinder-engine tests are provided.
Date: April 1944
Creator: Collins, John H., Jr.; Bisson, Edmond E. & Schmiedlin, Ralph F.
Item Type: Refine your search to only Report
open access

Wall interference in a two-dimensional-flow wind tunnel with consideration of the effect of compressibility

Description: Report presenting tunnel-wall corrections for an airfoil of finite thickness and camber in a two-dimensional-flow wind tunnel. The theory takes account of the effects of the wake of the airfoil and of the compressibility of the fluid and is based on the assumption that the chord of the airfoil is small in comparison with the height of the tunnel. The theoretical results are compared with the small amount of low-speed experimental data available and agreement is seen to be satisfactory, even for… more
Date: December 1944
Creator: Allen, H. Julian & Vincenti, Walter G.
Item Type: Refine your search to only Report
open access

Derivation of charts for determining the horizontal tail load variation with any elevator motion

Description: Report presenting equations relating the wing and tail loads are derived for a unit elevator displacement. The equations are converted into a nondimensoinal form and charts are given that can be used to predict wing- and tail-load-increment variation for any type of elevator motion and for degrees of airplane stability.
Date: January 1943
Creator: Pearson, Henry A.
Item Type: Refine your search to only Report
open access

Icing Tests of Aircraft-Engine Induction Systems

Description: Report presenting a program of icing tests conducted on an aircraft-engine induction system consisting of a Wright R-1820, G-200 blower section, Holley 1375-F carburetor and adapter, and specially built air scoop. The primary purpose of the investigation was to determine the effect of a number of possible factors on icing of engine-induction systems, including carburetor-air temperature, air-moisture content, water-droplet size, throttle opening, mixture ratio, rate of air flow, altitude, and o… more
Date: January 1943
Creator: Kimball, Leo B.
Item Type: Refine your search to only Report
open access

Wind-Tunnel Tests of the 1/8-Scale Powered Model of the Curtiss XBTC-2 Airplane 1: Preliminary Investigation of Longitudinal Stability

Description: Report presenting a series of wind-tunnel tests made in the 7- by 10-foot tunnel of the Curtiss XBTC-2 model with power. The object of the tests was to determine and to improve, as necessary, the complete aerodynamic characteristics of the model. The report includes the results of the longitudinal stability investigation of the original model along with results from tests of various modifications.
Date: June 1944
Creator: Weil, Joseph & Wells, Evalyn G.
Item Type: Refine your search to only Report
open access

Single-Cylinder Oil-Control Tests of Porous Chrome Plated Cylinder Barrels for Radial Air-Cooled Engines

Description: Report presenting a series of single-cylinder engine tests run to determine a satisfactory method of reducing oil consumption in radial air-cooled engines with flat-face compression rings as standard parts and equipped with cylinder barrels salvaged by porous chrome plating. Testing was conducted using porous chrome-plated cylinders with straight and choke bores with standard flat-face compression rings.
Date: January 1946
Creator: Johnson, Robert L. & Swikert, Max
Item Type: Refine your search to only Report
open access

The Effect of Increased Cooling Surface on Performance of Aircraft-Engine Cylinders as Shown by Tests of the NACA Cylinder

Description: Report presenting a method of constructing fins of nearly optimum proportions to the point where a cylinder has been manufactured and tested. Data were obtained on cylinder temperature for a wide range of inlet-manifold pressures, engine speeds, and cooling-pressure differences. Results regarding cooling equations, cylinder-temperature relationships, and a comparison of three cylinder cooling performances are provided.
Date: July 1944
Creator: Schey, Oscar W.; Rollin, Vern G. & Ellerbrock, Herman H., Jr.
Item Type: Refine your search to only Report
open access

Laminar-boundary-layer oscillations and transition on a flat plate

Description: Report presenting an investigation of oscillations in the laminar boundary layer on a flat plate and their relation to transition to turbulent flow. The characteristics of boundary-layer oscillations were studied most successfully when the oscillations were artificially produced by a vibrating ribbon placed in the boundary layer near the surface. A review of theory regarding laminar-boundary-layer oscillations is provided.
Date: April 1943
Creator: Schubauer, G. B. & Skramstad, H. K.
Item Type: Refine your search to only Report
open access

A laboratory investigation of the icing characteristics of the Bendix-Stromberg carburetor model PD-12F5 with the Pratt and Whitney R-1830-C4 intermediate rear engine section

Description: Report presenting icing tests on a Bendix-Stromberg PD-12F5 carburetor mounted on a Pratt & Whitney R-1830-C4 intermediate rear engine section. Limiting icing conditions were established for simulated cruising power and simulated rated power over a range of carburetor-air temperatures, and relative humidities are provided.
Date: October 1944
Creator: Galvin, Herman B. & Essex, Henry A.
Item Type: Refine your search to only Report
open access

A Theoretical Investigation of the Lateral Oscillations of an Airplane With Free Rudder With Special Reference to the Effect of Friction

Description: Report presenting charts showing the variation in dynamic stability with the rudder hinge-moment characteristics. A stabilizing rudder floating tendency combined with a high degree of aerodynamic balance is shown to lead to oscillations of increasing amplitude.
Date: March 1943
Creator: Greenberg, Harry & Sternfield, Leonard
Item Type: Refine your search to only Report
Back to Top of Screen