This article reports on a study where 2D TMDs (MoS₂ and WS₂) and the 3D allotrope of carbon and graphite were incorporated into acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG) matrices in order to form polymer matrix composites (PMCs). The multipronged analysis described in this study was motivated by the purpose to fuse together topics of low-cost, additive manufacturing with 2D layered materials, and studying their ensuing mechanical and tribological properties.
The UNT College of Engineering strives to educate and train engineers and technologists who have the vision to recognize and solve the problems of society. The college comprises six degree-granting departments of instruction and research.
This article reports on a study where 2D TMDs (MoS₂ and WS₂) and the 3D allotrope of carbon and graphite were incorporated into acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG) matrices in order to form polymer matrix composites (PMCs). The multipronged analysis described in this study was motivated by the purpose to fuse together topics of low-cost, additive manufacturing with 2D layered materials, and studying their ensuing mechanical and tribological properties.
Physical Description
9 p.
Notes
Abstract: Two-dimensional layered materials (2DLMs), MoS₂ and WS₂, and three-dimensional (3D) graphite were infused in thermoplastic polymer matrices comprised of acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG). Two processing approaches were examined for creating polymer tensile test specimens using the composites for mechanical testing, which included three-dimensional (3D) printing and injection molding. The ductility generally decreased with the addition of the fillers indicated by an increase in Young’s modulus and a corresponding decrease in yield stress and tensile stress for the 2DLM-polymer composites. The dynamic friction data of the composites were measured in an attempt to exploit the solid phase lubricating properties of graphite and the 2DLM fillers. Graphite proved to lower the dynamic friction in the cases of 3D printed PETG and injection molded ABS, while MoS₂ and WS₂ were found to reduce friction in 3D printed PETG and ABS. Finally, the thermal conductivities of these polymer matrix composites were measured and compared to the pure polymer matrices. The thermal conductivity increased in both ABS and PETG composites containing graphite, MoS₂, and WS₂, irrespective of their processing routes. The use of 2DLM-based polymer composites remains an area of interest for a wide range of applications in the future, such as wearable electronics and sensors with low-cost additive manufacturing approaches.
Publication Title:
Journal of Vacuum Science & Technology A
Volume:
38
Issue:
4
Peer Reviewed:
Yes
Collections
This article is part of the following collections of related materials.
UNT Scholarly Works
Materials from the UNT community's research, creative, and scholarly activities and UNT's Open Access Repository. Access to some items in this collection may be restricted.
This collection houses graduate student works other than theses and dissertations. All materials have been previously accepted by a professional organization or approved by a faculty mentor. The collection includes, but is not limited to projects or problems in lieu of thesis, supplemental files associated with theses and dissertations, posters, recitals, presentations, articles, reviews, book chapters, exhibitions, and artwork. Some items in this collection are restricted to use by the UNT community.
This collection presents scholarly and artistic content created by undergraduate students. All materials have been previously accepted by a professional organization or approved by a faculty mentor. Most classroom assignments are not eligible for inclusion. The collection includes, but is not limited to Honors College theses, thesis supplemental files, professional presentations, articles, and posters. Some items in this collection are restricted to use by the UNT community.
Gamboa, Gerardo; Mazumder, Sangram; Hnatchuk, Nathalie; Catalan Gonzalez, Jorge Alfredo; Cortes, Damaris; Chen, Ikang et al.3D-printed and injection molded polymer matrix composites with 2D layered materials,
article,
June 26, 2020;
(https://digital.library.unt.edu/ark:/67531/metadc1782993/:
accessed May 2, 2024),
University of North Texas Libraries, UNT Digital Library, https://digital.library.unt.edu;
crediting UNT College of Engineering.
