Search Results

open access

Surface Geologic Reconnaissance of Keechi Dome, Anderson County, Texas

Description: Abstract: "A geologic reconnaissance map was prepared of the supradomal area of Keechi Dome, Texas, at a scale of 1:24,000. To do this, available data were compiled, and field checking and new mapping were done where access was permitted."
Date: January 1983
Creator: Brandwein, Sidney S. & White, Robert M.
Partner: UNT Libraries Government Documents Department
open access

Surface Geologic Reconnaissance of Cypress Creek Dome, Perry County, Mississippi

Description: Abstract: "An updated geologic reconnaissance map was prepared of the vicinity of Cypress Creek Dome, Mississippi, at a scale of 1:24,000. Compilaion of previous work, field mapping, and heavy material analyses were used to prepare the map."
Date: January 1983
Creator: Brandwein, Sidney S. & White, Robert M.
Partner: UNT Libraries Government Documents Department
open access

Surface Geologic Reconnaissance of Richton Dome, Perry County, Mississippi

Description: Abstract: "A geologic reconnaissance map was prepared of the supradomal area of Richton Dome, Mississippi, on a scale of 1:24,000. To do this, previous work was compiled and consolidated, and field mapping and heavy mineral analyses took place."
Date: January 1983
Creator: Brandwein, Sidney S. & White, Robert M.
Partner: UNT Libraries Government Documents Department
open access

Surface Geologic Reconnaissance of Vacherie Dome, Bienville and Webster Parishes, Louisiana

Description: Abstract: "A geologic reconnaissance map was prepared in the area of Vacherie Dome at a scale of 1:24,000. To do this, the available data were compiled, resistivity surveys were conducted, and reconnaissance field mapping took place. Then all the information was consolidated for the map preparation."
Date: January 1983
Creator: Brandwein, Sidney S. & White, Robert M.
Partner: UNT Libraries Government Documents Department
open access

Topical Reports on Louisiana Salt Domes

Description: Abstract: "The Institute for Environmental Studies at Louisiana State University conducted research into the potential use of Louisiana salt domes for disposal of nuclear waste material. Topical reports generated in the 1981 and 1982 related to Vacherie and Rayburn's domes are compiled and presented, which address palynological studies, tiltmeter monitoring, precise releveling, saline springs, and surface hydrology. The latter two are basically a compilation of references related o these topics."
Date: September 1983
Creator: Louisiana State University (Baton Rouge, La.). Institute for Environmental Studies.
Partner: UNT Libraries Government Documents Department
open access

Progress Report for the Month of February, 1952

Description: This progress report of the Battelle Memorial Institute covers information in many categories for February, 1952. These include development of ceramic fuel elements, general ceramics, uranium and its alloys, thorium and its alloys, development of metallic fuel elements and assemblies, metals and alloys for reactor components, miscellaneous metallurgical work, liquid coolants and fuels, reactor engineering studies, and mechanism development.
Date: March 1, 1952
Creator: Russell, H. W.; Nelson, H. R. & Dayton, Russell W.
Partner: UNT Libraries Government Documents Department
open access

Extrusion Cladding of Uranium Fuel Plates

Description: The following report describes two methods of extrusion cladding of uranium fuel plates that were investigated and evaluated.
Date: August 22, 1958
Creator: Fiorentino, Robert J.; Drennen, David C.; Slunder, Charles J. & Hall, A. M.
Partner: UNT Libraries Government Documents Department
open access

GCRE Critical-Assembly Studies

Description: This report follows critical-assembly studies made to provide engineering and physics data to aid in developing the Gas Cooled Reactor Experiments.
Date: September 10, 1958
Creator: Dingee, David A.; Ballowe, William C.; Klingensmith, Raymond W.; Egen, R. A.; Jankowski, Francis J. & Chastain, Joel W.
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Iodide Zirconium Alloys

Description: Introduction: "The tensile properties, hot hardness, impact strength; and corrosion resistance of some arc-melted, iodide zirconium alloys have been determined. The alloys investigated include binary alloys of zirconium containing zero to five per cent tin, binary alloys of zirconium containing zero to 0.14 per cent nitrogen, and ternary alloys of zirconium containing tin and nitrogen, tin and uranium, and uranium and beryllium."
Date: November 1, 1952
Creator: Schwope, A. D. & Chubb, Walston
Partner: UNT Libraries Government Documents Department
open access

The Preparation of Beta Silicon Carbide

Description: This report explores the production of beta silicon carbide, a low-temperature, cubic modification of cubic silicon carbide. The temperature, heating time, type of starting material, and proportion of starting materials were all varied in order to test yields of beta silicon carbide.
Date: December 29, 1952
Creator: Gambino, J. R.; Mixer, W. G., Jr.; Wagner, H. E. & Harman, Cameron G.
Partner: UNT Libraries Government Documents Department
open access

Evaluation of Oxidation-Resistant Ceramics for High-Temperature Reactor Elements

Description: Abstract: "As a possible aid in the selection of ceramic materials for use in the fabrication of high-temperature reactor elements, the reported properties of 23 refractory oxidation-resistance ceramic compounds are tabulated. The thermal stresses and heat throughout capacities for nine of these compounds are estimated for conditions of steady heat flow and uniform heat generation in the temperature range of 1500 to 2500 F. The compounds studied have macroscopic thermal-neutron-absorption cross sections lower than 0.2 per centimeter. Data concerning the high-temperature stability of uranium compounds are tabulated for those with melting points above 2450 F."
Date: December 1, 1952
Creator: Harman, Cameron G.; Ferrell, Edward Francis.; Wagner, H. E. & Quirk, J. F.
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium-Tin Alloys

Description: Abstract: "The mechanical properties and corrosion resistance of induction-melted, zirconium-tin alloys have been determined. The alloys investigated contained from zero to five per cent tin and up to 0.3% carbon. The zirconium used was United States Bureau of Mines sponge zirconium. The mechanical properties investigated include the tensile, hot-hardness, and impact properties."
Date: December 22, 1952
Creator: Schwope, A. D. & Chubb, Walston
Partner: UNT Libraries Government Documents Department
open access

The Rolling of Uranium

Description: The following report discusses the method of rolling uranium rods and strips under various rolling conditions and the roll-separating force measured.
Date: December 30, 1952
Creator: Saller, Henry A.; Keeler, J. R. & Donley, R. J.
Partner: UNT Libraries Government Documents Department
open access

Electroplates on Thorium

Description: Abstract: "The protection of thorium in hot water was studied. Copper electrocladding on thorium offers promising protection against hot water. The corrosion of thorium in 95 C water was reduced appreciably by a thorium phosphate film. The results of this abbreviated investigation offer a basis for the development of a method of protecting thorium at elevated temperatures in corrosive media."
Date: January 9, 1953
Creator: Beach, John G.; Schickner, W. C.; Vaaler, L. E. & Faust, Charles L.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen