Search Results

open access

Consolidated Edision Thorium Reactor Physics Design

Description: The nuclear characteristics of the CETR are described. Core operating lifetime, control-rod worth, and power density distribution are discussed in relation to maximizing the core operating life. Other objectives of nuclear design are to minimize the power-density variation and to assure control of the reactor.
Date: July 1960
Creator: Barringer, H. S.; Flickinger, R. B. & Spetz, S. W.
Partner: UNT Libraries Government Documents Department
open access

Project CGC-830 Plant Modifications for Reprocessing Non-Production Reactor Fuels

Description: Facilities are to be designed for installation at Hanford for the reprocessing of irradiated, low enrichment fuels from non-production reactors, see Reference 1 and 2. The initial design of the processing facilities is to be based on processing the fuels discharged from the Dresden, Yankee, Piqua, Pathfinder and Shippingport (blanket elements only) reactors. Properties of the fuels and cladding make it impossible to completely process them in existing equipment, although the separation and deco… more
Date: July 29, 1960
Creator: Bierman, S. R.; Graf, W. A.; Kass, M.; Kligfield, G.; McKee, R.W.; Patridge, L. F. et al.
Partner: UNT Libraries Government Documents Department
open access

Solid State Division Semiannual Progress Report For Period Ending February 28, 1955

Description: This semiannual progress report and future reports will be published as two documents to permit a wider distribution of the unclassified material. The report numbers are assigned in sequence so that the two reports will fall together when filed by report number.
Date: July 12, 1960
Creator: Billington, D. S. & Crawford, J. H., Jr.
Partner: UNT Libraries Government Documents Department
open access

Cost Study of a 100-Mw(e) Direct-Cycle Boiling Water Reactor Plant

Description: Report issued by the Argonne national Laboratory discussing a technical and economic evaluation of a direct-cycle light-water boiling reactor designed for natural circulation and internal steam-water separation. The reference 100-Mw(e) reactor power plant design evolved from the study should have the best chance (compared to similar plants) of approaching the 8 to 9 mill/kwh total power-cost level. This report includes tables, and illustrations.
Date: July 1960
Creator: Bullinger, C. F. & Harrer, J. M.
Partner: UNT Libraries Government Documents Department
open access

Coagulant Aids as Filter Aids

Description: The Hanford water treatment plants were operated for a number of years with alum as a coagulant and activated silica as a coagulant and a polyacrylamide as a filter conditioning agent. (other polyelectrolytes may be used.) Sufficient time has elapsed to make a comparison of the two methods of operation valid and useful. Such a comparison is the purpose of this paper.
Date: July 21, 1960
Creator: Conley, W. R.
Partner: UNT Libraries Government Documents Department
open access

Hanford Controlled Potential Coulometer

Description: Report describing the Hanford Laboratory controlled potential coulometer. This includes the theory behind the coulometer, details of its circuitry, and performance tests. Appendix begins on page 23.
Date: July 11, 1960
Creator: Connally, R. E. & Scott, F. A.
Partner: UNT Libraries Government Documents Department
open access

A Transistorized Reactivity Measurement System

Description: An all-transistor system has been developed to be used in measuring the reactivity of the reactor in the Sandia Engineering Reactor Facility. In operation, the system triggers a pulsed neutron source (PNS) in the reactor and counts the resulting neutron flux, thus giving a measure of the time constant of the reactor. The counting is done in eleven time-sequenced counting channels. The reactor time constant is a measure of the reactor reactivity.
Date: July 6, 1960
Creator: Ehrman, Leonard
Partner: UNT Libraries Government Documents Department
open access

Thermal and Hydraulic Design of the Consolidated Edison Thorium Reactor

Description: This report presents the thermal and hydraulic analyses, both steady state and transient, for the CETR. Methods of calculations are discussed and results of analyses are presented. Steady state analyses are included for: pressure drops, flow distribution, orificing, burnout, fuel central melting, local boiling, and bulk boiling. Transient analyses are performed for several loss of forced coolant flow incidents.
Date: July 1960
Creator: Ferrell, J. K. (James K.); Flora, H. E.; Hostetler, D. R.; Stanek, L. J. & Vannoy, W. M.
Partner: UNT Libraries Government Documents Department
open access

Consolidated Edison Thorium Reactor: Reactor Vessel Internal Components Design

Description: The design functions and fabrication details for internal components of the CETR are presented and pertinent analytical stress studies are summarized. Functions of the internal components include proper orientation and support for the fuel elements, proper distribution of primary coolant within the reactor vessel, and the establishment of guide channels for the control rods.
Date: July 1960
Creator: Ficor, J.; Collings, D. M.; Sandrock, R. J. & Kalen, D. D.
Partner: UNT Libraries Government Documents Department
open access

Fuel Core Tester - UT-2

Description: Report that "describes an instrument that nondestructively tests uranium fuel element cores by ultrasonic methods" (p. 2).
Date: July 18, 1960
Creator: Frederick, C. L. & Waldkoetter, G. L.
Partner: UNT Libraries Government Documents Department
open access

Irradiation of an Aluminum Alloy-Clad, Aluminum-Uranium Alloy-Fueled Plate

Description: Report issued by the Argonne National Laboratory discussing irradiation tests of an aluminum alloy-clad, aluminum-uranium alloy fuel plate. As stated in the introduction, "calculations were made to determine the lowest possible pressure which would allow the maximum possible local boiling on the plate and still assure a margin of safety against burnout" (p. 9). This report includes tables, illustrations, and photographs.
Date: July 1960
Creator: Gavin, A. P. & Crothers, C. C.
Partner: UNT Libraries Government Documents Department
open access

Project Cowboy : Physical Properties of Salt Samples

Description: The purpose of Project Cowboy was to investigate the seismic signals generated by chemical explosions in underground cavities, with particular emphasis on the possibility of decoupling of these signals from the surrounding media. The project site was the Carey Salt Company salt mine, located approximately five miles west of Winnfield, Louisiana. The tests were run during fiscal year 1960. This report presents the results of tests performed on specimens from the samples of salt taken in the area. more
Date: July 15, 1960
Creator: Guido, Raymond S. & Warner, Stanley E.
Partner: UNT Libraries Government Documents Department
open access

Health and Safety Laboratory Fallout Program Quarterly Summary Report: March 1, 1960 - June 1, 1960

Description: Report that summarizes multiple laboratories' reports on global fallout deposition. Reports include data on Strontium-90 deposition recorded by the Health and Safety Laboratory, data from other laboratories, related interpretive reports, and recent publications related to fallout.
Date: July 1, 1960
Creator: Hardy, Edward P., Jr.; Klein, Stanley & Rivera, Joseph
Partner: UNT Libraries Government Documents Department
open access

Liquid Metal Fuel Reactor: Four-Inch Utility Test Loop: Design, Construction, Operation, and Experimental Results

Description: Report issued by the Brookhaven National Laboratory discussing fuel reactor test loops. The "design, construction, operation, and experimental results" (p. 1) are presented. This report includes tables, illustrations, and photographs.
Date: July 14, 1960
Creator: Hoffman, K. C.; Isler, R. J.; Scarlett, C. H. & Schoener, G. A.
Partner: UNT Libraries Government Documents Department
open access

A Study of Heat and Mass Transfer to Uninsulated Liquid Oxygen Containers

Description: The wide use of liquid oxygen as an oxidant in rocket engines has resulted in an increased interest in low-temperature heat transfer. Storage tanks for this type of application, being uninsulated, contain a boiling-liquid low-temperature sink, which is susceptible to environmental heat inputs and subsequent liquid loss by vaporization. Such losses are difficult to predict due to the complex combination of ambient conditions which exist, and the lack of knowledge concerning their combined effect… more
Date: July 20, 1960
Creator: Holten, David Charles
Partner: UNT Libraries Government Documents Department
open access

Invention Report: Hermetically Sealed Closure on a Sheathed Thermocouple

Description: Applications of sheathed (metal) thermocouples may require in many instances, the insertion of the thermocouple thermal junction into an area that must be hermetically sealed to the outside. This same area usually contains highly reactive heat transfer medium such as an eutectic alloy of sodium and potassium of sodium alone. When fissionable materials are being irradiated, fission products that are driven off would also be present and must be contained under varying temperatures and pressures.
Date: July 12, 1960
Creator: Kosut, Bert S.
Partner: UNT Libraries Government Documents Department
open access

Use Of Pyroelectric Devices For Measuring Small Temperature Changes

Description: A technique for measuring extremely small temperature changes by means of a pyroelectric device is described. The sensing element is a short thin rod of polarized barium titanate ceramic with electrodes on the ends. The electric charges produced by changes in temperature are measured by a vibrating-reed electrometer. A number of calorimetric and noncalorimetric applications for the device are suggested.
Date: July 1960
Creator: Lang, Sidney B.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen