Search Results

open access

Design Criteria for Irradiated Vessels Task 6.0 Summary Report

Description: Abstract: This technical report presents design criteria to prevent the brittle fracture of ferritic reactor vessels that cold occur as a result of the rise in NDT caused by fast neutron irradiation. The criteria require that maximum principal stress in the vessel does not exceed 18 percent of yield stress at temperatures below NDT + 60 degree F. Under certain conditions the allowable stress may be based on the irradiated yield stress. A discussion of brittle fracture and an explanation of the … more
Date: September 29, 1961
Creator: McLaughlin, D. W.
Partner: UNT Libraries Government Documents Department
open access

Chemical Technology Division Annual Progress Report, May 31, 1961

Description: Report documenting the ongoing research and developments of the Chemical Technology Division of the Oak Ridge National Laboratory.
Date: September 21, 1961
Creator: Oak Ridge National Laboratory. Chemical Technology Division.
Partner: UNT Libraries Government Documents Department
open access

Comparison of Radiation-Induced Graft Copolymerization Untilizing Electron Accelerators and Isotope Sources as Radiation Initiators

Description: "A comparison of grafting to two thicknesses of polypropylene film is made using isotope and electron accelerator initiation. The results indicate that the grafting of methacrylic acid: styrene to polypropylene is mainly a surface reaction."
Date: September 12, 1961
Creator: Odian, George; Oliver, William F. & Pierre, Karl
Partner: UNT Libraries Government Documents Department
open access

Hazards Evaluation of the SM-1 Penetrated Gasket

Description: Abstract: This technical report describes the as-constructed SM-1 penetrated gasket designed for SM-1 Core and Flow Instrumentation (Task XIV). This report supplements APAE No. 79, The Summary Hazards Report for Task XIV, and evaluates the effects of a postulated failure of this gasket. The effects of failure on the Maximum Credible Accident are determined and conclusions and recommendations for the use of this gasket are made.
Date: September 8, 1961
Creator: Coombe, J. R.; Gebhardt, F. G. & James, B.
Partner: UNT Libraries Government Documents Department
open access

Steady State and Transient Thermal and Hydraulic Analysis of SM-2 Termination Report

Description: Abstract: Thermal characteristics of the SM-2 core were analyzed at steady state and loss of flow conditions. For steady state operation, the steady state code STDY-3 was used. For transients during a loss of flow accident, ART-02, a one-dimensional code, was used. This analysis indicates the SM-2 core is safe from burnout under steady state operation at design power level (28 tMW) because (1) no nucleate boiling exists, and (2) the minimum burnout ratio is above 2.0. The core is safe from burn… more
Date: September 8, 1961
Creator: Segalman, I. & Bradley, P. L.
Partner: UNT Libraries Government Documents Department
open access

Consolidated Edison Thorium Reactor: Core Assembly Physics and Zero Power Tests Report

Description: Results of zero power tests to confirm the nuclear design of the Consolidated Edison Thorium Reactor Core are presented. The maximum core reactivity, control rod worths, and power distribution were measured.
Date: September 1961
Creator: Edlund, Milton C. (Milton Carl), 1924-; Ball, R. M.; Deddens, J. C. & Flickinger, R. F.
Partner: UNT Libraries Government Documents Department
open access

Design, Fabrication, and Irradiation of Superheat Fuel Element SH-4B in VBWR

Description: From abstract: "The design, fabrication, and irradiation results are described for a 0.028 inch thick 304 stainless clad fuel element (SH-4B) exposed in the Vallecitos Boiling Water Reactor loop under superheat conditions."
Date: September 1, 1961
Creator: Spalaris, C. N.; Boyle, R. F.; Evans, T. F. & Esch, E. L.
Partner: UNT Libraries Government Documents Department
open access

Failure Test of a Double Chambered NaK-Filled Irradiation Capsule

Description: Report describing tests "in which a double chambered irradiation capsule containing NaK (sodium-potassium alloy) in its inner chamber was deliberately perforated to allow NaK (the heat transfer medium) and water to react within the capsule chambers" (p. 2). The report includes descriptions of the materials used in the tests, test procedures, and results.
Date: September 1961
Creator: Kosut, B. S.; Leggett, R. D. & Marshall, R. K.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for Insertion of the PM-1-M-2 Element in the SM-1 Core II

Description: Abstract: This technical report describes the Martin Co. PM-1-M-2 test element and analyzes the potential hazard incurred by its inclusion in the SM-1 Core II. A nuclear analysis develops power distributions and reactivity effects. Hydraulic and thermal analyses develop anticipated burnout heat flux ratios. An evaluation of the risk involved with the inclusion of this element is presented. In view of the narrow margin by which the PM-1-M-2 test element meets the minimum burnout ratios as def… more
Date: September 1, 1961
Creator: Coombe, J. R.; Scoles, J. F.; Brondel, J. O. & Lee, D. H.
Partner: UNT Libraries Government Documents Department
open access

Nuclear Superheat Quarterly Project Report: Fifth Quarter, July-September 1960

Description: From introduction: "this is the fifth of a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."
Date: September 1961
Creator: U.S. Atomic Energy Commission
Partner: UNT Libraries Government Documents Department
open access

Nuclear Superheat Quarterly Project Report: Seventh Quarter, January-March 1961

Description: From introduction: "This is the seventh of a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."
Date: September 1961
Creator: Pennington, R. T.
Partner: UNT Libraries Government Documents Department
open access

PM-3A Nuclear Power Plant Secondary Shield Design

Description: "The design, analysis, and selection of system components for functions related to secondary shielding and associated auxiliary systems for the Antarctic PM-3A Nuclear Power Plant are described. Backfill material characteristics, shielding and activation analyses, heat transfer analysis, backfill cooling system, water exclusion and removal system, and instrumentation and control are discussed."
Date: September 1961
Creator: Siler, W C
Partner: UNT Libraries Government Documents Department
Back to Top of Screen