52 Matching Results

Search Results

Results: 1 - 24 next
open access

Evaluation of Kanigen, Electroless Nickel Plating for Steam Side of a Sodium Component Steam Generator

Description: Introduction: This is a final report on the evaluation of Kanigen electroless nickel plating for surfaces in contact with water and steam i a sodium heated AISI Type 316 stainless steel steam generator. The purpose of the coasting was to afford protection from stress corrosion cracking originating on the water-steam side of the unit. It has been concluded that the kanigen coating does not afford adequate protection for the services condition intended. This work was performed as part of the r… more
Date: February 15, 1961
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Final Design Report: DR-1 Gas Loop

Description: Report describing the performance, fission product tolerance, design, and costs of the DR-1 Gas Loop, which is an in-reactor test facility.
Date: March 1961
Creator: Baars, R. E.
Partner: UNT Libraries Government Documents Department
open access

Runaway Analysis for a Gas Cooled Reactor

Description: From abstract: "This report presents an IBM digital computer program that solves numerically and simultaneously the equations that describe gross reactor behavior under runaway conditions."
Date: April 1961
Creator: Becker, Richard A.
Partner: UNT Libraries Government Documents Department
open access

Investigation of Local Boiling of SM-1

Description: Abstract; SM-1 Reactor Core I Rearranged and Spiked, and Core II with Special Components were analyzed under various off-design conditions to induce nucleate boiling. The steady state code, STDY-3, written for the thermal analysis of pressurized water cores, was employed for the analysis. The code performs a complete steady state parallel channel thermal analysis for both nominal and hot channels. Thermal characteristics of individual elements were investigated while changing the parameters of… more
Date: June 20, 1961
Creator: Bradley, P. L.
Partner: UNT Libraries Government Documents Department
open access

SM-2 Full Scale Flow Studies Termination Report

Description: Abstract: Hydrodynamic flow studies were conducted on a full scale model of the SM-2 reactor vessel and core. Test fluid was water at 200 psi and 200 degree F. Test facilities, model, and instrumentation design are discussed. Flow distribution in the stationary fuel elements, lattices, and control rods of the second pass was investigated. Pressure losses through the various core components were measured and are compared with calculated values. Observed over-all pressure drop was 71 feet of wate… more
Date: July 30, 1961
Creator: Christenson, J. A.; Richards, W. M. S. & Davidson, S. L.
Partner: UNT Libraries Government Documents Department
open access

Advanced Indirect Cycle Water Reactor Studies for Maritime Applications: Part 4. Steam Driven Coolant Pumps

Description: Fourth part of the "final report of a study directed toward the evolution, design, and demonstration of the principle design features of interim indirect cycle water cooled and moderated nuclear power plants which will be useful in early cooperative programs between the Atomic Energy Commission and the United States maritime industry" (p. i).
Date: October 23, 1961
Creator: Combustion Engineering, inc. Nuclear Division.
Partner: UNT Libraries Government Documents Department
open access

Hazards Summary Report for the SM-1 Core Temperature and Flow Instrumentation: Task XIV

Description: Abstract; This technical report describes the changes in the SM-1 incurred by the experiment, Core Temperature and Flow Instrumentation (Task XIV), and evaluates the possible hazard involved in these changes. Temperature and flow measurements will be taken on a Task XIV instrumented stationary fuel element, instrumented control rod fuel element and other selected points in the SM-1 core to provide data on the core steady state and transient performance. The hazards evaluation consists of a nu… more
Date: March 30, 1961
Creator: Coombe, J. R.; Brondel, J. O.; Lee, D. H. & Matthews, F. T.
Partner: UNT Libraries Government Documents Department
open access

Hazards Evaluation of the SM-1 Penetrated Gasket

Description: Abstract: This technical report describes the as-constructed SM-1 penetrated gasket designed for SM-1 Core and Flow Instrumentation (Task XIV). This report supplements APAE No. 79, The Summary Hazards Report for Task XIV, and evaluates the effects of a postulated failure of this gasket. The effects of failure on the Maximum Credible Accident are determined and conclusions and recommendations for the use of this gasket are made.
Date: September 8, 1961
Creator: Coombe, J. R.; Gebhardt, F. G. & James, B.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for SM-1 Core II Without the SM-1 Core I High Burnup Elements and With the PM-1-M-2 Element

Description: Abstract: The removal of both SM-1 Core I high burnup elements from SM-1 Core II and the insertion of the PM-1-M-2 element and the SM-1 Core I spare element in SM-1 Core II is discussed. Nuclear and thermal characteristics of Core II with these changes are presented and conclusions related to the changes in the hazard potential are made. If the core change indicated by this report is made, local peaking factors will be decreased and burnout ratios will be increased. This, of course, in itself… more
Date: October 7, 1961
Creator: Coombe, J. R.; Lee, D. H. & Mathews, F. T.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for SM-1 Core II With the SM-1 Core II High Burnup Elements Replaced with SM-1 Core I Spare Elements

Description: Abstract: The removal of both SM-1 Core I high burnup elements from the SM-1 Core II and the insertion of two SM-1 Core I spare elements i their places are discussed. Nuclear and thermal characteristics of Core II with the change are presented and conclusion related to the change in hazard potential are made. If the core change indicated by this report is made, local peaking factors will be decreased and burnout ratios will be increased. This, of course, in itself leads to a more conservative… more
Date: October 9, 1961
Creator: Coombe, J. R.; Lee, D. H. & Matthews, F. T.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for Insertion of the PM-1-M-2 Element in the SM-1 Core II

Description: Abstract: This technical report describes the Martin Co. PM-1-M-2 test element and analyzes the potential hazard incurred by its inclusion in the SM-1 Core II. A nuclear analysis develops power distributions and reactivity effects. Hydraulic and thermal analyses develop anticipated burnout heat flux ratios. An evaluation of the risk involved with the inclusion of this element is presented. In view of the narrow margin by which the PM-1-M-2 test element meets the minimum burnout ratios as def… more
Date: September 1, 1961
Creator: Coombe, J. R.; Scoles, J. F.; Brondel, J. O. & Lee, D. H.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for the SM-1 Core II With Special Components

Description: Abstract: This technical report describes the changes incurred in the SM-1 by the insertion of the SM-1 Core II and special components. The special components consist of impact specimens, a boron gradient rod, SM-2 elements, a PM-1-M element, and high burnup SM-1 Core I elements. The change in hazards, due to operation of SM-1 with Core II and the special components is evaluated. The analysis indicates there is no change in hazards.
Date: March 30, 1961
Creator: Coombe, J.; Lee, D.; Segalman, I. & Robertson, R.
Partner: UNT Libraries Government Documents Department
open access

Superposition of Forced and Diffusive Flow in a Large-Pore Graphite

Description: Report describing an "investigation of steady-state counter-flow of gases in a large pore graphite" by exposing it to streams of helium and argon.
Date: 1961
Creator: Evans, R. B., III; Truitt, J. & Watson, G. M.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for the SM-1 Core II Without Special Components

Description: Abstract: This technical report describes the changes incurred in the SM-1 by the insertion of the SM-1 Core II without special components. The SM-1 Core II components were made to specifications very nearly identical to those of SM-1 Core I. The differences consist of europium absorber sections, internal europium flux suppressors in the control rod fuel elements, and low impurity cladding. Each of the SM-1 Core II components with the exception of the five absorber sections new in SM-1 Core … more
Date: April 19, 1961
Creator: Gallagher, J. G.
Partner: UNT Libraries Government Documents Department
open access

The Post-Irradiation Examination of a PuO₂-UO₂ Fast Reactor Fuel

Description: From abstract: "Post-irradiation examination consisted of dimensional measurements, gamma scans, determination of fission gas release, visual examination of the fuel, measurement central voids, and metallographic examination of selected samples.
Date: November 1961
Creator: Gerhart, J. M.
Partner: UNT Libraries Government Documents Department
open access

Experimental Stress Analysis of EGCR Pressure Vessel

Description: Report regarding the structural evaluations made of the upper head of the Experimental Gas Cooled Reactor (EGCR). This report includes descriptions of the model, experimental procedures, and analyses of the results. Appendix begins on page 139.
Date: 1961
Creator: Greenstreet, B. L.; Holland, R. W.; Maxwell, R. L.; Witt, F. J.; Shobe, L. R. & LaVerne, M. E.
Partner: UNT Libraries Government Documents Department
open access

Economic Evaluation of a 300-Mw(e) Supercritical Pressure Power Reactor

Description: Report describing a 300-Mw(e) Supercritical Pressure Power Reactor's facilities, physics, economics, and problems encountered during its development. Appendix begins on page 103.
Date: June 1961
Creator: Harty, H.; Regimbal, J. J.; Toyoda, K. G. & Widrig, R. D.
Partner: UNT Libraries Government Documents Department
open access

Fission Product Activity in SM-1 Core I Primary System and Surface Contamination on SM-1 Type Fuel Elements. Task XVIII, Phases 2 and 3

Description: Abstract; The fission product data obtained during SM-1 Core I operation (June 1957 - May 1960) is reviewed briefly and interpreted. Evidence is presented to indicate that a fuel element defect was responsible for the high fission product activity level observed in the primary coolant. Relative escape coefficients are calculated and the defect size estimated. Anticipated fission product levels during SM-1 Core II and SM-1A Core I operation are estimated from alpha surface contamination data o… more
Date: February 28, 1961
Creator: Hasse, Robert A. & Zegger, John L.
Partner: UNT Libraries Government Documents Department
open access

Mid-Year Summary Report October 1, 1960-March 31, 1961 Army Pwr Support and Development Program

Description: Abstract: A cyclic stress analysis of the SM-1 primary system was carried out. Problems encountered in the fabrication of PM-2A Core II and SM-lA Core II are described, and the results of an examination of damaged SM-lA Core I stationary fuel elements reported. A preliminary study of the radiation damage to SM-1 reactor vessel was made and the possibility of annealing the vessel discussed. Performance analyses are presented for five cores: SM-1 Core, SM-1 Core 1 rearranged and spiked, SM-1 Core… more
Date: June 2, 1961
Creator: Hoover, H. L.
Partner: UNT Libraries Government Documents Department
open access

Numerical Results for EGCR Moderator-Element Stress Problems

Description: From introduction: "A recent report describes the development of a general program for the IBM Type 7090 electronic computer for calculating plane thermal stresses."
Date: July 3, 1961
Creator: Hulbert, Lewis E. & Redmond, Robert F.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen