Search Results

open access

Fission Product Activity in SM-1 Core I Primary System and Surface Contamination on SM-1 Type Fuel Elements. Task XVIII, Phases 2 and 3

Description: Abstract; The fission product data obtained during SM-1 Core I operation (June 1957 - May 1960) is reviewed briefly and interpreted. Evidence is presented to indicate that a fuel element defect was responsible for the high fission product activity level observed in the primary coolant. Relative escape coefficients are calculated and the defect size estimated. Anticipated fission product levels during SM-1 Core II and SM-1A Core I operation are estimated from alpha surface contamination data o… more
Date: February 28, 1961
Creator: Hasse, Robert A. & Zegger, John L.
Partner: UNT Libraries Government Documents Department
open access

Hazards Summary Report for the SM-1 Core Temperature and Flow Instrumentation: Task XIV

Description: Abstract; This technical report describes the changes in the SM-1 incurred by the experiment, Core Temperature and Flow Instrumentation (Task XIV), and evaluates the possible hazard involved in these changes. Temperature and flow measurements will be taken on a Task XIV instrumented stationary fuel element, instrumented control rod fuel element and other selected points in the SM-1 core to provide data on the core steady state and transient performance. The hazards evaluation consists of a nu… more
Date: March 30, 1961
Creator: Coombe, J. R.; Brondel, J. O.; Lee, D. H. & Matthews, F. T.
Partner: UNT Libraries Government Documents Department
open access

Hazards Evaluation of the SM-1 Penetrated Gasket

Description: Abstract: This technical report describes the as-constructed SM-1 penetrated gasket designed for SM-1 Core and Flow Instrumentation (Task XIV). This report supplements APAE No. 79, The Summary Hazards Report for Task XIV, and evaluates the effects of a postulated failure of this gasket. The effects of failure on the Maximum Credible Accident are determined and conclusions and recommendations for the use of this gasket are made.
Date: September 8, 1961
Creator: Coombe, J. R.; Gebhardt, F. G. & James, B.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for the SM-1 Core II With Special Components

Description: Abstract: This technical report describes the changes incurred in the SM-1 by the insertion of the SM-1 Core II and special components. The special components consist of impact specimens, a boron gradient rod, SM-2 elements, a PM-1-M element, and high burnup SM-1 Core I elements. The change in hazards, due to operation of SM-1 with Core II and the special components is evaluated. The analysis indicates there is no change in hazards.
Date: March 30, 1961
Creator: Coombe, J.; Lee, D.; Segalman, I. & Robertson, R.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for the SM-1 Core II Without Special Components

Description: Abstract: This technical report describes the changes incurred in the SM-1 by the insertion of the SM-1 Core II without special components. The SM-1 Core II components were made to specifications very nearly identical to those of SM-1 Core I. The differences consist of europium absorber sections, internal europium flux suppressors in the control rod fuel elements, and low impurity cladding. Each of the SM-1 Core II components with the exception of the five absorber sections new in SM-1 Core … more
Date: April 19, 1961
Creator: Gallagher, J. G.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for Insertion of the PM-1-M-2 Element in the SM-1 Core II

Description: Abstract: This technical report describes the Martin Co. PM-1-M-2 test element and analyzes the potential hazard incurred by its inclusion in the SM-1 Core II. A nuclear analysis develops power distributions and reactivity effects. Hydraulic and thermal analyses develop anticipated burnout heat flux ratios. An evaluation of the risk involved with the inclusion of this element is presented. In view of the narrow margin by which the PM-1-M-2 test element meets the minimum burnout ratios as def… more
Date: September 1, 1961
Creator: Coombe, J. R.; Scoles, J. F.; Brondel, J. O. & Lee, D. H.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for SM-1 Core II Without the SM-1 Core I High Burnup Elements and With the PM-1-M-2 Element

Description: Abstract: The removal of both SM-1 Core I high burnup elements from SM-1 Core II and the insertion of the PM-1-M-2 element and the SM-1 Core I spare element in SM-1 Core II is discussed. Nuclear and thermal characteristics of Core II with these changes are presented and conclusions related to the changes in the hazard potential are made. If the core change indicated by this report is made, local peaking factors will be decreased and burnout ratios will be increased. This, of course, in itself… more
Date: October 7, 1961
Creator: Coombe, J. R.; Lee, D. H. & Mathews, F. T.
Partner: UNT Libraries Government Documents Department
open access

Experiments and Analysis for SM-1 Core II With Special Components

Description: Abstract: This technical report contains a summary of analytical and experimental work performed on SM-1 Core II, with special components is presented. The effects of these special assemblies upon power distribution and core reactivity were calculated and compared to experimental measurements. A thermal analysis was conducted to determine steady state and transient performance of the special test components of the core as well as some of the hotter standard Core II components. Experimental work… more
Date: January 1, 1961
Creator: Lee, D. H.; Robinson, R. A. & Segalman, I.
Partner: UNT Libraries Government Documents Department
open access

Mid-Year Summary Report October 1, 1960-March 31, 1961 Army Pwr Support and Development Program

Description: Abstract: A cyclic stress analysis of the SM-1 primary system was carried out. Problems encountered in the fabrication of PM-2A Core II and SM-lA Core II are described, and the results of an examination of damaged SM-lA Core I stationary fuel elements reported. A preliminary study of the radiation damage to SM-1 reactor vessel was made and the possibility of annealing the vessel discussed. Performance analyses are presented for five cores: SM-1 Core, SM-1 Core 1 rearranged and spiked, SM-1 Core… more
Date: June 2, 1961
Creator: Hoover, H. L.
Partner: UNT Libraries Government Documents Department
open access

Investigation of Local Boiling of SM-1

Description: Abstract; SM-1 Reactor Core I Rearranged and Spiked, and Core II with Special Components were analyzed under various off-design conditions to induce nucleate boiling. The steady state code, STDY-3, written for the thermal analysis of pressurized water cores, was employed for the analysis. The code performs a complete steady state parallel channel thermal analysis for both nominal and hot channels. Thermal characteristics of individual elements were investigated while changing the parameters of… more
Date: June 20, 1961
Creator: Bradley, P. L.
Partner: UNT Libraries Government Documents Department
open access

Design Criteria for Irradiated Vessels Task 6.0 Summary Report

Description: Abstract: This technical report presents design criteria to prevent the brittle fracture of ferritic reactor vessels that cold occur as a result of the rise in NDT caused by fast neutron irradiation. The criteria require that maximum principal stress in the vessel does not exceed 18 percent of yield stress at temperatures below NDT + 60 degree F. Under certain conditions the allowable stress may be based on the irradiated yield stress. A discussion of brittle fracture and an explanation of the … more
Date: September 29, 1961
Creator: McLaughlin, D. W.
Partner: UNT Libraries Government Documents Department
open access

Criteria for Evaluating Hazards Involved in Proposed Tests On and/or Modifications To the SM-1

Description: Abstract: This technical report elucidates principles of hazards evaluation. The concept of hazards potential is introduced and utilized to show how a reactor system perturbation will influence its nuclear safety. Literature relating to reactor safety is referenced to provide the sources of information required for hazards analysis and show how they influence a hazards evaluation. A checklist of items which should be considered in evaluating a change, test, or modification is presented.
Date: October 18, 1961
Creator: Scoles, J. F.
Partner: UNT Libraries Government Documents Department
open access

Extended SM-2 Critical Experiments : CE-2

Description: Abstract: This technical report contains a description and results of a second series of critical experiments performed on the SM-2 core mock-up, as additional to the first series of experiments reported in APAE No. 54. The SM-2 core mock-up contains 36.4 kg U-235 and and estimated 67.9 gm B-10. The equivalent diameter and the active height are about 22 in.; the metal-to-water volume ration is 0.344. Data is presented on activation, reactivity, and stuck rod measurements. All measurements were … more
Date: June 30, 1961
Creator: McCool, W. J.; Robinson, R. A.; Weiss, S. H.; Raby, T. M.; Schrader, E. W. & Walthousen, L. D.
Partner: UNT Libraries Government Documents Department
open access

Evaluation of Kanigen, Electroless Nickel Plating for Steam Side of a Sodium Component Steam Generator

Description: Introduction: This is a final report on the evaluation of Kanigen electroless nickel plating for surfaces in contact with water and steam i a sodium heated AISI Type 316 stainless steel steam generator. The purpose of the coasting was to afford protection from stress corrosion cracking originating on the water-steam side of the unit. It has been concluded that the kanigen coating does not afford adequate protection for the services condition intended. This work was performed as part of the r… more
Date: February 15, 1961
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Suitability of Inconel for Corrosion Protection on Water Side of Sodium Component Steam Generator

Description: Abstract; The heat exchanger and steam generator for the U.S. Atomic Energy Commission Sodium Components Project will be constructed entirely of type 316 stainless steel. Because of the susceptibility of this alloy to stress corrosion cracking, it is proposed to clad all areas of the steam generator with Inconel where the stainless steel will be exposed to water and steam. This report includes a discussion of the work by numerous investigators that justify the selection of Inconel for this se… more
Date: March 1, 1961
Creator: Phillips, Laurence E. & Vawter, Frank J.
Partner: UNT Libraries Government Documents Department
open access

Steady State and Transient Thermal and Hydraulic Analysis of SM-2 Termination Report

Description: Abstract: Thermal characteristics of the SM-2 core were analyzed at steady state and loss of flow conditions. For steady state operation, the steady state code STDY-3 was used. For transients during a loss of flow accident, ART-02, a one-dimensional code, was used. This analysis indicates the SM-2 core is safe from burnout under steady state operation at design power level (28 tMW) because (1) no nucleate boiling exists, and (2) the minimum burnout ratio is above 2.0. The core is safe from burn… more
Date: September 8, 1961
Creator: Segalman, I. & Bradley, P. L.
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for SM-1 Core II With the SM-1 Core II High Burnup Elements Replaced with SM-1 Core I Spare Elements

Description: Abstract: The removal of both SM-1 Core I high burnup elements from the SM-1 Core II and the insertion of two SM-1 Core I spare elements i their places are discussed. Nuclear and thermal characteristics of Core II with the change are presented and conclusion related to the change in hazard potential are made. If the core change indicated by this report is made, local peaking factors will be decreased and burnout ratios will be increased. This, of course, in itself leads to a more conservative… more
Date: October 9, 1961
Creator: Coombe, J. R.; Lee, D. H. & Matthews, F. T.
Partner: UNT Libraries Government Documents Department
open access

SM-2 Full Scale Flow Studies Termination Report

Description: Abstract: Hydrodynamic flow studies were conducted on a full scale model of the SM-2 reactor vessel and core. Test fluid was water at 200 psi and 200 degree F. Test facilities, model, and instrumentation design are discussed. Flow distribution in the stationary fuel elements, lattices, and control rods of the second pass was investigated. Pressure losses through the various core components were measured and are compared with calculated values. Observed over-all pressure drop was 71 feet of wate… more
Date: July 30, 1961
Creator: Christenson, J. A.; Richards, W. M. S. & Davidson, S. L.
Partner: UNT Libraries Government Documents Department
open access

Advanced Indirect Cycle Water Reactor Studies for Maritime Applications: Part 4. Steam Driven Coolant Pumps

Description: Fourth part of the "final report of a study directed toward the evolution, design, and demonstration of the principle design features of interim indirect cycle water cooled and moderated nuclear power plants which will be useful in early cooperative programs between the Atomic Energy Commission and the United States maritime industry" (p. i).
Date: October 23, 1961
Creator: Combustion Engineering, inc. Nuclear Division.
Partner: UNT Libraries Government Documents Department
open access

Runaway Analysis for a Gas Cooled Reactor

Description: From abstract: "This report presents an IBM digital computer program that solves numerically and simultaneously the equations that describe gross reactor behavior under runaway conditions."
Date: April 1961
Creator: Becker, Richard A.
Partner: UNT Libraries Government Documents Department
open access

The Cold Pressing of Sinterable UO₂

Description: The intent of this work was to explore more fully the pressing of sinterable UO2 powders into cylindrical compacts in the hope that a more precise prediction of green density in terms of powder properties, pressure, and geometry could be evolved.
Date: March 27, 1961
Creator: Levey, R. P., Jr.
Partner: UNT Libraries Government Documents Department
open access

Numerical Results for EGCR Moderator-Element Stress Problems

Description: From introduction: "A recent report describes the development of a general program for the IBM Type 7090 electronic computer for calculating plane thermal stresses."
Date: July 3, 1961
Creator: Hulbert, Lewis E. & Redmond, Robert F.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen