57 Matching Results

Search Results

Results: 1 - 24 next
open access

The Development and Testing of UO2 Fuel Systems for Water Reactor Applications: Summary Report, July 1, 1961 - June 15, 1962

Description: From introduction: "The work described in this report represents the Joint United States - European Atomic Energy Community effort which is in keeping with the spirit of cooperation in contributing to the common good by the sharing of scientific and technical information and minimizing the duplication of effort by the limited pool of technical talent available in Western Europe and the United States."
Date: June 1962
Creator: Murtha, B. E. & Chernock, W. P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Effects of Major Parameters on Cycle Efficiency and Cost for a Gas-Cooled Reactor Turbine Power Plant

Description: Cycle study performed on a closed loop Brayton cycle incorporating a gas-cooled nuclear reactor, regeneration, and compressor intercooling. The purpose of the study was to determine the effect of various cycle parameters on efficiency and cost.
Date: October 5, 1962
Creator: Miskell, R. V.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for SM-1 Core Temperature and Flow Instrumentation (Task XIV) Covering Special Test Procedures.

Description: Abstract: Test procedures for special tests involving in-core SM-1 temperature and flow instrumentation are described (Task XIV Package Tests). These tests involve in-core steady state flow and temperature measurements, loss of flow transients, load transients, reduced primary system pressure operations and reduced element flow. The thermal and hydraulic conditions prevailing in these tests, including steady state and transient burnout rations, are developed. The effects of reduced system pres… more
Date: February 28, 1962
Creator: Bradley, P. L. & Coombe, J. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Preliminary Technical Report SM-1 Core III with Type 3 Elements

Description: Abstract: This preliminary technical report covers design of the SM Type 3 element, its use .in.. SM-1 Core III, and planned use in the Type 3 Core for PM-2A. The Type:3 element characteristics are compared with Type 1 (SM-1 Core I) element nuclear, metallurgical, thermal and hydraulic characteristics and fabrication. The effect of using the Type 3 element in SM-1 Core III and. its planned use in a Type 3 Core for PM-2A is discussed with regard to operation, shielding, reactor safety and all co… more
Date: March 30, 1962
Creator: Inglima, J. N.; Beam, R. H.; Davidson, S. L. & Edgar, E. C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

BWR Reference Design for PL-3

Description: Abstract: The natural circulation, direct cycle, boiling water reactor reference design presented in this technical report is the alternate to the preferred preliminary design developed under Phase I of the PL-3 contract. The report presents plant design criteria, summary of plant selection, plant description, reactor and primary system description, thermal and hydraulic analysis, nuclear analysis, control and instrumentation description, shielding description, auxiliary systems, power plant eq… more
Date: February 28, 1962
Creator: Humphries, G. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

PWR Preliminary Design for PL-3

Description: Abstract: The pressurized water reactor preliminary design presented in this volume is the preferred design developed under Phase I of the PL-3 contact. This technical report presents plant design criteria, summary of plant selection, plant description, reactor and primary system description, thermal and hydraulic analysis, nuclear analysis, control and instrumentation description, shielding description, auxiliary systems, power plant equipment, waste disposal, buildings and tunnels, services, … more
Date: February 28, 1962
Creator: Humphries, G. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

PL-3 Phase I Task 3 Research and Development Report

Description: Abstract: This technical report summarizes the results of research and development tasks performed during Phase I of this contract and presents recommendations for future development work. Work is reported in the areas of plant assembly and relocation, housings and footings, waste heat dissipation, instrumentation, refueling systems, waste disposal, shielding, core nuclear thermal and hydraulic studies, gaseous waste processing (BWR), and critical experiments on a 5 x 5 array of Type 3 fuel ele… more
Date: March 12, 1962
Creator: Humphries, G. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Silver - Cadmium - Indium Absorber Development

Description: Abstract: This technical report covers development of an AG-Cd-In alternate absorber section for Army Type SM reactors. It describes the absorber material composition and the geometric configuration. It gives the nuclear and thermal analyses supporting this configuration and a detailed description of the manufacturing practice employed in fabricating the final design component.
Date: June 13, 1962
Creator: Shaw, R. A. & Harris, R. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Power Distributions for Type 3 Replacement Cores for SM-1, SM-1A and PM-2A

Description: Abstract: The most adverse power distribution and power peaking factors have been developed for Type 3 replacement cores for SM-1, SM-1A, and PM-2A. Also included is the 37 element Type 3 core for SM-1, which is known as SM-1 Core III and is a prototype of a Type 3 core for PM-2A. The power distributions were compared with measured distributions obtained on type 3 fuel elements in SM-1, SM-1A and PM-2A core configurations. Using the measured data as a standard, correction factors were obtained … more
Date: July 25, 1962
Creator: Oggerino, J. P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for PM-2A Core II

Description: Abstract: This technical report describes the changes incurred in the PM-2A by the planned insertion of PM-2A Core II and the replacement of the startup and check sources. PM-2A Core II components were fabricated to specifications very nearly identical to those of PM-2A Core I. The essential difference in the cores is the boron loading which permits PM-2A Core II to meet a "one-stuck rod criteria" at beginning of life. This core has been subjected to a zero power experiment and loading procedur… more
Date: June 21, 1962
Creator: Coombe, John R. & Stephenson, L. D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Fast Neutron Flux Measurements and Analysis in SM-1 and PM-2A Core and Vessel Mockups

Description: Abstract: This technical report contains a summary of experimental and analytical work performed on cold clean SM-1 Core II with special components and PM-2A Core I each with thermal shield and vessel mockups. The purpose of this work was to define the neutron intensity and spectra to which the pressure vessels are subjected in order to assess the effect of irradiation on the vessel lifetimes. The radial distributions of the energy dependent neutron flux per unit power in the core and vessel m… more
Date: March 31, 1962
Creator: Sontheimer, K. C.; Kemp, S. N.; Lois, L.; Clancy, E. F. & McCool, W. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Investigation of 17-4 PH Steel Components Used in SM-1, SM-1A, PM-2A Reactor Plants

Description: Abstract: This technical report covers the investigation of 17-4 PH steel components used in the SM-1, SM-1A and PM-2A nuclear power plants, which consist of control rod drive racks, pinions, seal shafts and associated parts. Evidence supporting the continued use of 17-4 PH steel in these applications is presented. Alco's current procurement and processing specifications for 17-4 PH steel are included. The evidence presented is in the form of stress calculations, test and environmental data and… more
Date: January 23, 1962
Creator: Haraway, E. S. & Saccocio, R. M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Nuclear Measurements for Type 3 Replacement Cores for SM-1, SM-1A and PM-2A CE 3

Description: Abstract: This technical report contains the description and results of an experimental program to evaluate the effect of utilizing Type 3 (SM-2) replacement cores in existing Army field plants SM-1, SM-1A and PM-2A. This program, conducted at the Alco Products Critical Facility, employed SM-2 mockup fuel elements similar in composition to Type 3 fuel elements to determine start-up characteristics of Type 3 cores in SM-1, SM-1A and PM-2A core configurations. measurements include comprehensive … more
Date: January 11, 1962
Creator: Raby, T. M.; Walthousen, L. D.; Kemp, S. N.; McCool, W. J.; Sontheimer, K. C. & Robinson, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for Step Transient Loading Tests on the SM-1 : Task XII

Description: Abstract: This technical report evaluates hazards involved with SM- 1 plant response and system performance tests (Task XII), to determine the response of the SM-1 plant to step electrical and steam load changes. The report describes the changes in plant equipment and operating procedures for this task and evaluates these changes for possible additional hazards to those described in APAE No. 2, Revision 1, "Hazards Summary Report for the Army Package Power Reactor SM-1."
Date: February 1, 1962
Creator: Pomeroy, D. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

SM-1 Reactor Vessel Closure Stud Investigation

Description: Abstract: This report presents metallurgical .analyses and corrosion tests conducted to determine :causes of failure of two SM- 1 reactor vessel studs due to fracture in the threaded areas, after 23 months' operation (March 1959). Conclusions of corrosion tests are: (1) failure of the studs was caused by stress corrosion cracking, (2) contributing factors to failure of the studs were improper control of heat treatment of the studs and absence of treatment for stress relief after thread grindin… more
Date: March 23, 1962
Creator: Reali, D. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

PM-2A Core II Zero Power Experiment

Description: Abstract: This technical report covers the zero power experiments performed on PM-2A Core II at the Alco Critical Facility. PM-2A Core II is the first replacement core for a portable pressurized reactor at Camp Century, Greenland. Core II is the same as Core I with the exception that Core II has an increased burnable poison (B-10) content. The zero power experiment consisted of fuel element uniformity test; core assembly test, development of an on-site loading procedure and an analysis of exper… more
Date: March 30, 1962
Creator: Walthousen, L. D.; Mageean, J. V.; Raby, T. M. & Lee, D. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Army PWR Support and Development Program Six Months Summary Report : October 1, 1961 - March 31, 1962

Description: Abstract: Progress is reported on research and development tasks under the Program Plan for Engineering Support and Development of Army Pressurized Water Reactor Power Plants, Contract AT(30-1)-2639, during the six months' period October 1, 1061 to March 31, 1962.
Date: May 25, 1962
Creator: Dixon, M. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Shielding Measurements at the SM-1 Reactor : June 1961

Description: Abstract: Neutron flux and gamma radiation measurements through the SM-1 primary shield were made at the startup of Core II in June 1961. They extend previous measurements (APAE-35) both vertically and horizontally in the primary shield and in the rod drive pit. Dose rate measurements on spent fuel elements under water are also reported.
Date: March 16, 1962
Creator: Moote, F. G. & Obrist, C. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

SM-1 Shielding Analyses

Description: Abstract: This technical report analyzes gamma dose rate and neutron measurements in their relation to the SM-1 shield design and is a continuation of previous shielding measurements and analyses reported in APAE-35 and APAE-35 Supplement 2. The data reported herein are spent fuel element and rod drive pit gamma dose rates. An analysis of gamma dose rates off the core midplane is presented and compared with test data.
Date: June 20, 1962
Creator: Stephenson, L. D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

EOCR Control Rod and Driver Fuel Hydraulic Tests

Description: Report discussing the results of experiments on an EOCR prototype control rod, control rod drive, and driver fuel assembly that were extensively tested in 500 deg F Santowax and 132 deg F water. These tests not only established the operating characteristics of these assemblies but also revealed a number of deficiencies in the various components. It includes descriptions of the control rod, control rod drive, and driver fuel assembly together with descriptions of their method of operation.
Date: October 19, 1962
Creator: Harrison, L. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen