32 Matching Results

Search Results

Results: 1 - 24 next
open access

Fast Ceramic Reactor Development Program: Experimental Studies of Sodium Logging in Fast Ceramic Reactor Fuels

Description: From abstract: "The experimental determination of the effects of sodium ingress on high-performance oxide fuels is described. Capsule design, fabrication, irradiation, examination, and analysis are described in detail."
Date: September 1963
Creator: O'Neill, G. L.; Novak, P. E.; Johnson, M. L. & Baily, W. E.
Partner: UNT Libraries Government Documents Department
open access

Design Study: Sodium Modular Reactor

Description: This study was undertaken for the USAEC under Contract AT(04-3)-189, Project Agreement No. 6, to investigate desirable features of a sodium cooled, graphite moderated uranium fueled power reactor using the modular concept, and, based on this investigation, evaluate the economic potential of this reactor type.
Date: January 15, 1960
Creator: General Electric Company
Partner: UNT Libraries Government Documents Department
open access

Steam-Cooled Power Reactor Evaluation: Mixed Spectrum Superheater

Description: From introduction: "This report provides the preliminary design for the nuclear portion of a 300 MWe Mixed Spectrum Superheater to be in operation by 1967.
Date: November 1960
Creator: U.S. Atomic Energy Commission
Partner: UNT Libraries Government Documents Department
open access

Steam-Cooled Power Reactor Evaluation: Study of 300 Mw(e) Once-Through Superheater Reactor

Description: From introduction: "This report presents a conceptual design study of the once-through superheat reactor design based on experimental heat transfer results obtained during the fall of 1960 on Task F-2 of the AEC sponsored Nuclear Superheat Project."
Date: January 1961
Creator: U.S. Atomic Energy Commission
Partner: UNT Libraries Government Documents Department
open access

Sodium Mass Transfer - I: Test Loop Design

Description: From abstract: "This report presents the design, fabrication, assembly, operating procedures, and start-up data for six experimental test loops to examine the effect of steel exposed to sodium at temperatures as high as 1300 F."
Date: June 1962
Creator: Lockhart, R. W.; Billuris, G. & Lane, M. R.
Partner: UNT Libraries Government Documents Department
open access

Fabrication of Fuel Rods by Tandem Rolling

Description: From introduction: "The purpose of this report is to present the details of the exploratory and developmental work on tandem rolling, and the subsequent fabrication of tandem rolled fuel rods for irradiation testing in the Vallecitos Boiling Water Reactor."
Date: July 1961
Creator: Lingafelter, J. W.
Partner: UNT Libraries Government Documents Department
open access

Design, Fabrication, and Irradiation of Superheat Fuel Element SH-4B in VBWR

Description: From abstract: "The design, fabrication, and irradiation results are described for a 0.028 inch thick 304 stainless clad fuel element (SH-4B) exposed in the Vallecitos Boiling Water Reactor loop under superheat conditions."
Date: September 1, 1961
Creator: Spalaris, C. N.; Boyle, R. F.; Evans, T. F. & Esch, E. L.
Partner: UNT Libraries Government Documents Department
open access

The Post-Irradiation Examination of a PuO₂-UO₂ Fast Reactor Fuel

Description: From abstract: "Post-irradiation examination consisted of dimensional measurements, gamma scans, determination of fission gas release, visual examination of the fuel, measurement central voids, and metallographic examination of selected samples.
Date: November 1961
Creator: Gerhart, J. M.
Partner: UNT Libraries Government Documents Department
open access

Comparative Study of PuC-UC and PuO₂-UO₂ as Fast Reactor Fuel

Description: From abstract: "This section, Part II, extends the comparison of two ceramic fuel systems to include the fuel cycle cost comparison in greater detail particularly with respect to fabrication and reprocessing unit costs."
Date: November 15, 1962
Creator: Collins, G. D.
Partner: UNT Libraries Government Documents Department
open access

Multi-Rod Burnout at High Pressure

Description: From abstract: "Thirty-two burnout points were obtained on an electrically heated assembly of 9 simulated fuel rods in a square channel."
Date: September 1962
Creator: Polomik, E. & Quinn, E. P.
Partner: UNT Libraries Government Documents Department
open access

Prediction of the Critical Heat Flux in Forced Convection Flow

Description: From summary: "A superposition model is developed to predict the critical heat flux in forced convection flow. The model is applied to available experimental results in boiling water flows and good agreement is obtained between the model and test data over the multitude of geometries, flow rates, pressures, and fluid enthalpies tested to-date."
Date: June 20, 1962
Creator: Levy, S.
Partner: UNT Libraries Government Documents Department
open access

Simplified Power Conversion: Unit Study

Description: From abstract: "This report presents the results of a feasibility study on a simplified power conversion unit primarily for use with nuclear, steam power plants for military applications."
Date: June 1962
Creator: Clark, P. M.
Partner: UNT Libraries Government Documents Department
open access

VBWR Stability Test Report

Description: Analysis of the stability of boiling water reactors.
Date: June 1963
Creator: U.S. Atomic Energy Commission
Partner: UNT Libraries Government Documents Department
open access

Conceptual Design for 75 MWe Mixed Spectrum Superheating Reactor Power Plant

Description: "This report presents the conceptual design of a 75 MWe prototype Mixed Spectrum Superheater power plant. The scope of the work has emphasized primarily the design, performance, and cost information on the nuclear portion of the plant. The research and development programs required to insure plant feasibility are also present."--Intro.
Date: February 25, 1962
Creator: U.S. Atomic Energy Commission
Partner: UNT Libraries Government Documents Department
open access

Experimental Studies of Transient Effects in Fast Reactor Fuels

Description: An experimental program to evaluate the performance of FCR and EFCR fuel during transient operation is outlined, and the initial series of tests are described in some detail. Test results from five experiments in the TREAT reactor, using 1-in. OD SS-clad UO₂ fuel specimens, are compared with regard to fuel temperatures, mechanical integrity, and post-irradiation appearance. Incipient fuel pin failure limits for transients are identified with maximum fuel temperatures in the range of 7000 deg F.… more
Date: November 15, 1962
Creator: Field, J. H.
Partner: UNT Libraries Government Documents Department
open access

Materials for Superheated Fuel Sheaths: Relative Performance of Alloys in Superheated Steam Environments

Description: From abstract: "Study of radiation effects upon the tensile properties of the alloys, corrosion behavior in the absence and presence of stress, effect of prolonged, high temperature exposures upon structure sensitive properties of the alloys, and physical metallurgical changes as a function of exposure in a superheat environment.
Date: July 1963
Creator: Comprelli, F. A.; MacMillan, D. F. & Spalaris, C. N.
Partner: UNT Libraries Government Documents Department
open access

Liquid Metal Fast Breeder Reactor Design Study: Volume 1

Description: From abstract: "A detailed description of a reference 1000-MWe fast breeder reactor plant is presented, together with design specifications and the experimental bases for the design."
Date: January 1964
Creator: General Electric Company
Partner: UNT Libraries Government Documents Department
open access

Liquid Metal Fast Breeder Reactor Design Study: Volume 2

Description: From introduction: "Documentation of the various considerations and design techniques involved in the design of the reference 1000-MWe fast oxide breeder reactor."
Date: January 1964
Creator: General Electric Company
Partner: UNT Libraries Government Documents Department
Back to Top of Screen