70 Matching Results

Search Results

Results: 1 - 24 next
open access

Fuel Failure Examinations and Analyses in the High Power Density Program

Description: Summary: The High Power Density Project includes a comprehensive fuel development program which has the objective of developing and demonstrating the performance of a nuclear reactor core having a high power density, long fuel life, and low fabrication cost. The fuel program is made up of two principal tasks. Task 1A consists of irradiation tests in the VBWR of Type 304 stainless steel clad, UO2 pellet type fuel rods fabricated by current commercial processes. Task 1B consists of the investigat… more
Date: September 16, 1963
Creator: Arlt, W. H. & Vandenberg, S. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Design and Fabrication of Coextruded Stainless Steel Clad UO2 Fuel Rods

Description: A process was developed in which stainless steel-clad UO2 fuel rods are fabricated by high-temperature coextrusion. The process has a potential of being a more economical method for the preparation of stainless steel-clad UO2 fuel rods than the conventional pellet process. Consequently, it was considered advantageous to evaluate the irradiation characteristics of fuel rods fabricated in this manner. Therefore, 24 coextruded fuel rods were manufactured for evaluation in a reactor. The required a… more
Date: June 1963
Creator: Baroch, C. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Reactor Safety and Fuel Cycle Economics Considerations for Fast Reactors

Description: Abstract: A core design study of a 10 Mwe fast ceramic reactor is presented. Local reactivity coefficients, safety criteria, accident analyses, and economics are considered. An attempt is made to find a new balance of characteristics by purely geometric devices, i.e., by exploring the sodium : fuel ratio and varying the height : diameter ratio of the core. The use of BeO in the core was also investigated.
Date: November 11, 1963
Creator: Cohen, K. P.; Greebler, P.; McNelly, M. J.; Murphy, P. M.; Sherer, D. B. & Zebroski, E. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Maritime Loop Irradiation Program, S-I-5-B-M Fuel Irradiation Water Chemistry, Final Report

Description: Introduction: The purpose of this technical report is to review the water chemistry methods and equipment developed for use with the Maritime Loop Irradiation Program conducted in the General Electric Test Reactor (GETR) from December 2, 1960 to July 19, 1962. Special emphasis is given to areas having general application to other high purity water systems. The Appendix includes a discussion of specific conductivity and pH in high purity water systems. A major section of this report is devoted t… more
Date: August 1, 1963
Creator: Danielson, D. W.; Gilbert, R. S. & Panter, G. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

In-Core Instrumentation Development Program, Detectors for In-Core Power Monitoring

Description: Introduction: The object of Project Agreement 22, Task 1, is to develop improved detectors which can operate up to 1000 F for in-core power monitoring. Several ideas have been developed to achieve this goal: (1) root mean square fluctuation voltage measurement of ion chamber signals, (2) thermocouple-type detectors, and (3) fabrication developments.
Date: June 1963
Creator: DuBridge, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

In-Core Instrumentation Development Program Quarterly Progress Report June - September 1963

Description: Introduction: The objective of Project Agreement 22 is to determine the feasibility of covering the complete reactor neutron flux start range from 10(3) - 5 x 10(13) nv by using in-core chambers. The counting mode of operating will be used at low neutron fluxes and the root mean square voltage fluctuation mode will be used at high neutron flux levels. Experiments have been run utilizing various ion chambers, gases, gas pressures, voltage, and cables to measure sensitivities and range operating … more
Date: October 1963
Creator: DuBridge, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Nuclear Superheat Quarterly Project Report: Seventeenth Quarter, August-October 1963

Description: From introduction: "This is the seventeenth in a series of quarterly reports which cover the progress and results from the conceptual designs, economic evaluations and research and development work performed by the General Electric Company as part of Contract AT(01-3)-189, Project Agreement No. 13."
Date: November 15, 1963
Creator: Flock, W. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Development of Pulsed Neutron Application to Power Reactor Start-Up Procedures. Fifth Quarterly Progress Report, April 1-June 30, 1963

Description: Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the app… more
Date: July 15, 1963
Creator: Garelis, Edward & Meyer, P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Development of Pulsed Neutron Application to Power Reactor Start-Up Procedures. Sixth Quarterly Progress Report, July 1-September 30, 1963

Description: Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the app… more
Date: October 15, 1963
Creator: Garelis, Edward & Meyer, P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Development of Pulsed Neutron Application to Power Reactor Start-Up Procedures. Fourth Quarterly Progress Report, January 1-March 31, 1963

Description: Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The experimental work centers around aspects of detecting neutrons in the presence of 10/sup 7/ r/hr gamma fields. Boric acid experiments and Humboldt Bay experiments are reported.
Date: May 13, 1963
Creator: Garelis, Edward & Meyer, Paul
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Grain Growth of UO2. Part I

Description: Abstract: (1) Grain growth in UO2 pellets was studies between 100 C and 2600 C. The pellets were encapsulated in small vacuum-tight tungsten containers in an argon atmosphere. (2) The grain size-time relationship could be expressed by an equation. A low exponent, m>_ 1/3, was found in those experiments and is related to the type of UO2 investigated. An activation energy of 65 kcal/mole was obtained for the grain growth process. The time exponent, m, increased with increasing temperature if the … more
Date: August 15, 1963
Creator: Hausner, H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Multirod (Four Rod) Critical Heat Flux at 1000 PSIA

Description: Technical report describing the four-rod heat flux experiments that are a part of a continuing program of study of the critical heat flux, or burnout phenomenon in order that water cooled reactors can be designed with a maximum of safety and efficiency. During heat transfer with boiling, there is a particular heat flux, for a given set of flow conditions and geometry, above which the nucleate boiling process begins to break down. This breakdown of the nucleate boiling process is known as burno… more
Date: September 1963
Creator: Hench, John E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

High Power Density Development Project: Fourteenth Quarterly Progress Report, July-September 1963

Description: Development of nuclear reactor cores having high power density, long fuel life, and low fabrication costs is the objective of this program sponsored by the AEC. Five tasks are in progress: (1) Task 1A-High Power Density Fuel Development. The number of assemblies has been reduced to seven as a result of the failure of two pellet fuel assemblies. The average burnup of the group operating as of September 1 is 7500 MWD/T. (2) Task 1B-Fuel Fabrication Development. Assembly. Assembly 12S gave positiv… more
Date: October 1963
Creator: Holladay, R. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Statistical Techniques Used in the Specific Zirconium Alloy Design Program

Description: Technical report describing the statistically designed empirical approach being used to choose a candidate Zr alloy optimum with respect to corrosion and hydriding rates in steam and having acceptable mechanical properties. The statistical techniques used and the reasons for their use are discussed in detail, with emphasis on the estimation of corrosion rates. Estimation of response surfaces is also considered.
Date: November 11, 1963
Creator: Jaech, John L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Two-Phase Pressure Losses Quarterly Progress Report: Fifth Quarter, February 12, 1963 - May 12, 1963

Description: Technical report describing that void measurements were made in the 1/2-inch by 1-3/4-inch rectangular channel, for both flow up and flow down, at pressures of 600, 1000, and 1400 psia, and at various flows and quantities. Results at 1000 psia and 20 percent quality show that for the lowest flow both the void distribution and the average void are much different for flow down than for flow up, the void fraction for flow down being much higher. However, when the flow is increased both the void d… more
Date: June 1, 1963
Creator: Janssen, E. (Engineer) & Kervinen, J. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Two-Phase Pressure Losses Quarterly Progress Report: Sixth Quarter, May 12, 1963 - August 12, 1963

Description: Technical report describing that the pressure drops along 3/4-inch, 1-inch, and 1-1/4 inch straight pipes and across three contraction-expansion inserts in a 1-inch pipe have been measured under both single- and two-phase flow conditions. Pressure was varied from 600 to 1400 psia, flow from 0.25 x 10(6) to 1.66 x 10(6) lb/hr ft, and quality from zero to 90 percent. The single-phase pipe friction factor agrees with the Moody value for smooth pipe. The two-phase friction for horizontal flow shows… more
Date: September 1, 1963
Creator: Janssen, E. (Engineer) & Kervinen, J. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Specific Zirconium Alloy Design Program Quarterly Progress Report: Fifth Quarter, April - June, 1963

Description: A program is in progress for the design of a zirconium base alloy for steam service as nuclear fuel cladding. Thirty-one alloys selected for study of corrosion rate, hydriding rate and hydrogen embrittlement are in test. The corrosion testing of 1800 coupons to 3000 hours at at 300, 400, and 500 degrees C in refreshed steam has been completed. Statistical data analysis of the corrosion results are reported and alloys showing better corrosion performance at all test temperatures than that for Zi… more
Date: July 1, 1963
Creator: Klepfer, H. H.; Jaech, John L.; Blood, R. E. & Douglass, D. L. (David Leslie), 1931-
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Specific Zirconium Alloy Design Program Quarterly Progress Report: Sixth Quarter, July - September, 1963

Description: Summary: Fundamental studies in support of the alloy design work are complete except for the experimental determination of the diffusion of oxygen in alloy-doped non-stoichiometric ZrO2. Over 100 oxidation runs have now been made on samples of ZrO2 doped with 1 mole percent of the oxides of Al, Y, Fe, Cr, and Ni. The first round testing of 31 alloys is now essentially complete. Analysis of the steam corrosion rate and hydriding raw data taken at 300, 400, and 500 degrees C indicates that Zr-C… more
Date: October 1, 1963
Creator: Klepfer, H. H.; Jaech, John L.; Douglass, D. L. (David Leslie), 1931-; Blood, R. E. & Perrine, H. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Sodium-Cooled Reactors Program, Fast Ceramic Reactor Development Program: First Quarterly Report, October-December 1961

Description: Quarterly report discussing progress on the Fast Ceramic Reactor Development Program, "an integrated analytical and experimental program directed toward the development of fast reactors employing ceramic fuels, with particular attention to mixed plutonium-uranium oxide" (p. 1).
Date: August 15, 1963
Creator: Leitz, F. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen