Search Results

open access

Ceramic Investigations of UO₂

Description: This report covers the progress made on an intensive program to develop and evaluate UO2 as a possible fuel element for the PWR.
Date: June 16, 1955
Creator: Allison, Adrian G. & Duckworth, Winston H.
Partner: UNT Libraries Government Documents Department
open access

Electroplated Metals on Uranium for Aluminum Cladding

Description: Abstract: "Aluminum-clad nickel-plated uranium is corrosion resistant in boiling water. Samples with intentional defects in the aluminum-nickel clodding layers, after testing for more than 300 hr. showed no sign of rapid failure. The study of electroplated metals on uranium for aluminum cladding has defined the effects of several processing variables on the corrosion resistance. The quality of the uranium and the quality of the aluminum-nickel bond were important. Heat treatment and vacuum outg… more
Date: May 4, 1955
Creator: Beach, John G.; Schickner, William C.; Hopkinson, Dolores. & Faust, Charles L.
Partner: UNT Libraries Government Documents Department
open access

Geophysical Seismic Evaluation Study at Hanford

Description: From introduction: "In June, 1963, a geophysical research program was conducted at Hanford to determine the feasibility and desirability of using seismic methods in geohydrologic studies. Detection and delineation were desired of seven different geological features that in some sites affect the movement of liquid radioactive wastes discharged to the ground."
Date: December 1964
Creator: Brown, Ruth E. & Raymond, John R.
Partner: UNT Libraries Government Documents Department
open access

Hazards Summary Report for the Battelle Research Reactor

Description: From summary: "This report was prepared for the Advisory Committee on Reactor Safeguards for their review and consideration of the potential hazards concerning the Battelle Memorial Institute Research Reactor."
Date: April 4, 1955
Creator: Chastain, J. W.; Redmond, R. F.; Klickman, A.; Anno, J. & Fawcett, S. L.
Partner: UNT Libraries Government Documents Department
open access

The Properties and Heat Treatment of Zirconium-Uranium Alloys

Description: From Abstract: "The heat treatment and mechanical properties of four zirconium alloys...were investigated. Tensile, hardness, Jominy end-quench, and metallographic data constitute the basis for much of the report. Other data reported include the results of high-temperature creep, tensile, hardness, cold rolling, thermal-cycling, and dynamic-modulus tests." A connection is made between the behavior of these four alloys and more alloys in the zirconium-uranium system.
Date: January 10, 1955
Creator: Chubb, Walston; Muehlenkamp, G. T. & Manning, G. K.
Partner: UNT Libraries Government Documents Department
open access

Study of Aluminum Alloys Containing Up to 45 W/O Uranium

Description: Report discussing a study on casting techniques for the production of sound homogeneous extrusion blanks composed of aluminum-uranium alloys with 30 to 45 w/o uranium.
Date: April 30, 1957
Creator: Daniel, Norman E.; Foster, Ellis L.; DeMastry, John A.; Bauer, Arthur A. & Dickerson, Ronald F.
Partner: UNT Libraries Government Documents Department
open access

Solid-Phase-Reaction Studies of Control-Rod Materials

Description: Report discussing experiments on the interaction of neutron-absorber materials and metal matrix materials used in the fabrication of control rods, such as "boron, cadmium, and some of the rare-earth elements such as gadolinium and europium...In order to evaluate the reactions that might occur during fabrication and use, experiments were carried out in which combinations of the various control materials were heated in intimate contact with the several matrices at elevated temperatures."
Date: March 9, 1956
Creator: Gerds, Arnold F. & Mallett, Manley William, 1909-
Partner: UNT Libraries Government Documents Department
open access

Thermal Distortion of SAR Hafnium Control Rod

Description: Abstract: The thermal distortion of a Y-shaped hafnium control rod heated by arrays of individually controlled radiation heaters was studied. The large axial and radial temperature gradients specified for this control rod were easily obtained with the radiation-heating method. The distortion, as measured with dial indicators, amounted to a 2-mil movement of the free end of the rod in the direction of the coolest blade.
Date: June 27, 1956
Creator: Goldthwaite, William H.; Allen, C. Malcolm & Fawcett, Sherwood L.
Partner: UNT Libraries Government Documents Department
open access

The Fabrication of Subassemblies for the Supercritical-Water Reactor

Description: In studies of the fabrication of fuel subassemblies for the supercritical-water reactor, the limited ductility of stainless steel-UO₂ fuel sheet made the fabrication of corrugated-flat-plate-type subassemblies impractical. A fabricable MTR-type assembly, 5/8 in. square and 30 in. long, was developed. Methods for edge cladding fuel sheet were developed and a brazing alloy, GE-75, was found to be corrosion resistant in supercritical water.
Date: August 16, 1954
Creator: Keeler, J. R. & Hare, Alan W.
Partner: UNT Libraries Government Documents Department
open access

Survey of Refractory Uranium Compounds

Description: Abstract: Chemical and physical data on twenty binary uranium compounds that may prove suitable for refractory nuclear fuels were assembled. The compounds were those with aluminum, boron, carbon, iron, nickel, nitrogen, silicon, or sulfur. Too little is known at this time about the compounds to evaluate any of them for fuel. The program is being extended in an effort to provide the needed data.
Date: August 7, 1956
Creator: Loch, Luther D.; Engle, Glen B.; Snyder, M. Jack & Duckworth, Winston Howard
Partner: UNT Libraries Government Documents Department
open access

Uranium Migration in UO₂-Bearing Ceramics

Description: This report follows a preliminary study on uranium migration in pressed and sintered UO2-bearing bodies based on MoSi2 or Al2O3.
Date: September 4, 1953
Creator: Quirk, J. F.; Smalley, A. K.; Duckworth, W. H. & Ferrell, Edward Francis.
Partner: UNT Libraries Government Documents Department
open access

PRTR second generation shim assembly

Description: From introduction: "This document discusses the design, fabrication, assembly, and testing of a second generation shim rod assembly, and testing of a second generation shim rod assembly prototype for use in the Plutonium Recycle Test Reactor."
Date: November 1964
Creator: Rasmussen, D. E.
Partner: UNT Libraries Government Documents Department
open access

Static Tests of Corrosion Inhibitors for Aluminum and Carbon Steel

Description: The experiments described in this report were performed for two purposes: (1) to find a chemical, or combination of chemicals, that would be effective for inhibiting corrosion of steel in static portions of the Hanford water systems, and (2) as screening tests to select candidate mixtures for further testing to replace sodium dichromate as the inhibitor of aluminum and steel corrosion in the Hanford single-pass reactor cooling water.
Date: February 1965
Creator: Richman, R. B.
Partner: UNT Libraries Government Documents Department
open access

Evaluation and Consolidation of Electrolytic Thorium

Description: Abstract: "Sound, fabricable ingots of thorium were produced by triple are melting of electrolytic thorium. Consumable electrodes were fabricated by tack welding of cold-pressed and vacuum-sintered bars of the granular thorium electrodeposited from a molten-salt bath. The hydrogen content of the electrodeposited material was reduced from 80 to 4 ppm by vacuum sintering at 1250 C at pressures below 1 x 10-(-3) mm of mercury. Both sodium and chlorine content were reduced during melting; sodium fr… more
Date: June 15, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F. & Foster, Ellis L.
Partner: UNT Libraries Government Documents Department
open access

Grain Refinement of the As-Cast Uranium-5 w/o Chromium Alloy by Ternary Additions

Description: Abstract: "Refinement of grain size of the base uranium-chromium eutectic alloy (uranium-5 w/o chromium) by ternary additions is discussed. Thirteen additions to the base alloy were investigated, and three additions were found to exhibit worthwhile grain-refinement tendencies. The three alloys, uranium-5 w/o chromium-0.2 w.o molybdenum, uranium-5 w/o chromium-0.2 w/o germanium, and uranium-5 w/o chromium-0.2 w/o niobium, were heat treated to produce final grain-size structures of between 0.015 … more
Date: July 5, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F.; Murr, William E. & Bauer, Arthur A.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen