Search Results

open access

Distribution of Uranium at Low Acid : Low Uranium Concentrations into 4-1/2 Percent TBP-AMSCO

Description: Report wherein acid free uranyl nitrate hexahydrate was distributed into 4-1/2 percent TBP-Amsco 125-90W and combined with various concentrations of acid in order to study the distribution of uranium and hydrolysis effects.
Date: August 23, 1956
Creator: Andelin, Robert L.; Anderson, Edward L. & McVey, W. H.
Partner: UNT Libraries Government Documents Department
open access

U-10 Wt % Mo Fuel Element: Irradiation in SRE

Description: From abstract: The fuel element assembly was successfully irradiated in the SRE to a maximum burnup of 5300 Mwd/MTU, at a peak fission rate of approximately 1.5 x 10E13 fissions/cm3-sec and a maximum central temperature near 1200F.
Date: August 31, 1965
Creator: Arnold, J. L.; Miller, K. J. & Peterson, R. M.
Partner: UNT Libraries Government Documents Department
open access

In-Reactor Monitoring of Zircaloy-2 Plutonium Recycle Test Reactor Pressure Tubes: Part 2, May and June, 1962

Description: Report containing the results of a two year program wherein the 85 zircaloy-2 pressure tubes in Hanford Laboratories' Plutonium Recycle Test Reactor (PRTR) were monitored. Experimental procedures and results are described.
Date: August 1962
Creator: Doman, D. R. & Pankaskie, P. J.
Partner: UNT Libraries Government Documents Department
open access

UC Fuel Element Design and Fabrication

Description: Abstract: Uranium monocarbide shows considerable potential for use as a fuel in high temperature, high power density, nuclear power reactors. As Atomics International is proposing its use in sodium graphite type reactors, it was necessary to develop a process for fabricaing sodium bonded uranium carbide fuel elements.
Date: August 1, 1964
Creator: Draganchuk, W.
Partner: UNT Libraries Government Documents Department
open access

Potential Applications of Nuclear Energy in a Marine Environment

Description: Introduction: In January 1959, Stanford Research Institute was asked by the Office of Maritime Reactors, Division of Reactor Development, of the United States Atomic Energy Commission to identify potential applications of nuclear energy in a marine environment, excluding those involving standard commercial surface ships and direct defense applications, and to conduct a preliminary evaluation of these applications in order to determine which ones appeared most feasible for early implementation.
Date: August 1959
Creator: Duckstad, Eric E.
Partner: UNT Libraries Government Documents Department
open access

The High-Temperature Irradiation Behavior of Hypostoichiometric Uranium Monocarbide

Description: From abstract: A series of three multi-compartmented experiments was designed to investigate the irradiation behavior uranium carbide fuels, as a function of composition, temperature, and burn-up; and the mechanical properties of Type 304 stainless steel, as a function of temperature and integrated thermal neutron flux.
Date: August 31, 1965
Creator: Hahn, R. D.
Partner: UNT Libraries Government Documents Department
open access

Boiling Depressurization Transients

Description: Abstract: An analytical and experimental effort toward a better understanding of the mechanisms involved in nuclear power reactor loss-of-pressure accidents is presented.
Date: August 1, 1964
Creator: Halfen, F. J. & Berganzoli, F.
Partner: UNT Libraries Government Documents Department
open access

Calculated Costs of Fabrication of Plutonium-Enriched Fuel Elements

Description: Report regarding the study of the calculated costs of fabricating plutonium-enriched fuel elements for Hanford Laboratories' Plutonium Recycle Program. Topics include descriptions of the process, design study of plants that use U235 and plutonium enriched fuel, and estimates of costs.
Date: August 1962
Creator: Hanthorn, H. E.
Partner: UNT Libraries Government Documents Department
open access

The Fabrication of Subassemblies for the Supercritical-Water Reactor

Description: In studies of the fabrication of fuel subassemblies for the supercritical-water reactor, the limited ductility of stainless steel-UO₂ fuel sheet made the fabrication of corrugated-flat-plate-type subassemblies impractical. A fabricable MTR-type assembly, 5/8 in. square and 30 in. long, was developed. Methods for edge cladding fuel sheet were developed and a brazing alloy, GE-75, was found to be corrosion resistant in supercritical water.
Date: August 16, 1954
Creator: Keeler, J. R. & Hare, Alan W.
Partner: UNT Libraries Government Documents Department
open access

Energetic Neutral Injection into Thermonuclear Machines

Description: Abstract: "A scheme is discussed in which D+ ions would be accelerated to about 100 kev in a conventional accelerator, then be sent through a gas target frmo which about half the ions would emerge neutral with very little scattering or energy loss; the neutral beam would then cross into a magnetic field and part of the atoms would be ionized and trapped by colliding with the already trapped ions. The smallest mirror machine with a central field of 30-40 kilogauss, 2;1 mirror ratio and β = 01 to 0.5 that would trap most of the neutral beam in the steady state, would be about a meter in diameter and require the order of hundreds of amperes of D+ ions into the neutralizer. The smallest stellerator with a field of 30 kilogauss and β = 0.1 that would trap most of the neutral beam would be about a meter long and require about 10 amperes of D+ ions. A preliminary mirror machine experiment that might be done using the 1/2-ampere, 100-kev D+ beam from the UCRL spare MTA injector is discussed. A method of starting these machine is discussed."
Date: August 10, 1955
Creator: Lauer, Eugene J.
Partner: UNT Libraries Government Documents Department
open access

Sodium-Cooled Reactors Program, Fast Ceramic Reactor Development Program: First Quarterly Report, October-December 1961

Description: Quarterly report discussing progress on the Fast Ceramic Reactor Development Program, "an integrated analytical and experimental program directed toward the development of fast reactors employing ceramic fuels, with particular attention to mixed plutonium-uranium oxide" (p. 1).
Date: August 15, 1963
Creator: Leitz, F. J.
Partner: UNT Libraries Government Documents Department
open access

Applied Health Physics Annual Report for 1963

Description: Report issued by the Oak Ridge National Laboratory discussing work and progress made by the Health and Physics Division during 1963. Instrumentation, personnel monitoring, and laboratory monitoring is presented. This report includes maps, tables, illustrations, and photographs.
Date: August 1964
Creator: Morgan, K. Z.; Davis, D. M.; Hart, J. C.; Abee, H. H.; Gupton, E. D. & Warden, A. D.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen