Search Results

open access

The Design of a Dynamic Corrosion and Chemical Control Test Loop and Preliminary Out-of-Pile Test Results

Description: From abstract: "This report describes the overall loop design and the means by which this design was developed. These include critical facility measurements, analog computer calculations, hydraulic and heat transfer computations, and the construction and operation of an out-of-pile mock-up loop to determine the dynamic characteristics of the loop."
Date: July 12, 1963
Creator: Zelezny, W. F.
Partner: UNT Libraries Government Documents Department
open access

Development of Pulsed Neutron Application to Power Reactor Start-Up Procedures. Fifth Quarterly Progress Report, April 1-June 30, 1963

Description: Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the app… more
Date: July 15, 1963
Creator: Garelis, Edward & Meyer, P.
Partner: UNT Libraries Government Documents Department
open access

Development Program for Increased Output in the Garigliano Nuclear Reactor. Quarterly Report No. 3

Description: The United States and the European Atomic Energy Community (Euratom), on May 29, and June 18, 1958, signed an agreement which provides a basis for co-operation in programs for the advancement of the peaceful applications of atomic energy. The work described in this report represents the Joint U.S.-Euratom effort. The over-all development program is designed to obtain the test data and operating experience necessary to eventually realize a 50 percent increase in the output of the Garigliano Nucl… more
Date: July 1, 1963
Creator: Sorlie, T.
Partner: UNT Libraries Government Documents Department
open access

An Experimental Investigation of Two-Phase, Two-Component Flow in a Horizontal, Converging-Diverging Nozzle

Description: Report that "describes an investigation of the flow characteristics in a horizontal, converging-diverging nozzle for a two-phase, two-component system" (p. 1) using air and water and "attempting to determine the effects of accelerating the liquid phase by the gaseous phase" (p. 1).
Date: July 1963
Creator: Vogrin, Joseph A., Jr.
Partner: UNT Libraries Government Documents Department
open access

General and Localized Corrosion Studies of Type 300 Series Austenitic Stainless Steels in Simulated Superheat Reactor Environment

Description: The following conclusions are based on the out-of-pile general corrosion and localized attack studies completed to-date on several 300 series stainless steels: (1) Utilizing a sodium chloride-cycle test that produces a type failure that can occur in a superheat reactor system, Types 347 and vacuum-melted 304 SS have failed while vacuum-melted 310 SS was acceptable. (2) An improved chloride cycle test utilizing ferric chloride as the additive has been developed that produces an intergranular typ… more
Date: July 1963
Creator: Pearl, W. L.; Gaul, G. G. & Wozadlo, G. P.
Partner: UNT Libraries Government Documents Department
open access

The Hanford Isotopes Production Plant Engineering Study

Description: Report presenting the conceptual design, estimates of capital and operating costs, and details of the operation of a plant "capable of high volume production of encapsulated heat sources" (p. 3) of radioisotopes Sr90, Cs137, Ce144, and Pm147.
Date: July 1963
Creator: La Riviere, J. R.; Michels, L. R.; Riches, H. C.; Rohrmann, C. A.; Smith, C. W. & Swift, W. H.
Partner: UNT Libraries Government Documents Department
open access

High Power Density Development Project: Potter Meter Calibration and Instrumented Fuel Bundle Pressure Drop

Description: Summary: Technical report describing the testing of eight Potter Meters, for metering inlet flow and measuring exit steam qualities in the Consumers Big Rock Point Instrumented Fuel Assemblies, were individually calibrated for flow and pressure drop up to 500 gpm in the low temperature (130 F) fluid flow facility. The flow calibration comparison made with an ASME orifice installation, agreed to within + - 1 percent among seven of the meters, and meter Serial No. 8 was 2.8 percent lower than th… more
Date: July 26, 1963
Creator: Polomik, E. E. & Swan, C. L.
Partner: UNT Libraries Government Documents Department
open access

In-Core Instrumentation Development Program, Telemetering Transmitters for In-Core Power Monitoring Final Report

Description: Abstract: This technical report covers the development work conducted during a planned program with the U.s. Atomic Energy Commission, Contract AT(04-3-189, Project Agreement 22, directed toward the development of high temperature, nuclear radiation resistant, telemetering devices. The development program is devoted to: (1) investigation and selection of two possible telemetering devices, and electromechanical commutating switch and an AM oscillator employing TIMM circuit elements, (2) procurin… more
Date: July 1963
Creator: McQueen, A. H.
Partner: UNT Libraries Government Documents Department
open access

Mass Systematics Involving Low-Lying Excited States

Description: Technical report. From Abstract : "A step phenomenon in the nuclidic mass excess surface associated with magic numbers N, Z = 8 and 20 is shown to exist, whereas only breaks occur at higher magic numbers. Excited states are included which reveals possible smooth trends within Shell-Model subshells."
Date: July 3, 1963
Creator: Everling, F.
Partner: UNT Libraries Government Documents Department
open access

Materials for Superheated Fuel Sheaths: Relative Performance of Alloys in Superheated Steam Environments

Description: From abstract: "Study of radiation effects upon the tensile properties of the alloys, corrosion behavior in the absence and presence of stress, effect of prolonged, high temperature exposures upon structure sensitive properties of the alloys, and physical metallurgical changes as a function of exposure in a superheat environment.
Date: July 1963
Creator: Comprelli, F. A.; MacMillan, D. F. & Spalaris, C. N.
Partner: UNT Libraries Government Documents Department
open access

Pressure Pulses in Rapid Transient Boiling

Description: Investigation of whether the multi-thousand psi pressure pulses that occurred in the BORAX-I and SPERT-I destructive power excursion could have been generated by thermal mechanisms in the geometries of unmolten reactor cores. These pressure pulses were "at least as high as 6,000 psi, and probably higher than 10,000 psi " in BORAX I, and "between 3,000 and 4,000 lb/in" in SPERT I. An experimental investigation was undertaken of pressure pulse generation by purely thermal means.
Date: July 31, 1963
Creator: Wright, R. W.
Partner: UNT Libraries Government Documents Department
open access

Process Simulation on a Digital Computer Using Analog Methods

Description: Technical report. From Abstract : "A system has been developed to program a digital computer in much the same manner as an analog computer is programmed. Properties of a general purpose analog computer and a digital differential analyzer are combined to yield a program which employs, as input, standard data cards prepared from a diagram analogous to an analog computer diagram. The capacity of the system is much greater than that of most analog computers, making it applicable to large simulation… more
Date: July 10, 1963
Creator: Farris, George J. & Burkhart, Lawrence E.
Partner: UNT Libraries Government Documents Department
open access

Program for the Development of Plutonium Recycle for Use in Light Water Moderated Reactors Quarterly Progress Report: April 1 - June 30, 1963

Description: A research program is being conducted to obtain experimental data in the irradiation of plutonium-enriched fuel to confirm a theoretical model for predicting isotopic composition and reactivity changes in plutonium-enriched, light-water-moderated reactors. All program efforts have been temporarily deferred except for those associated with the irradiation of the program fuel element in the VBWR. The program fuel element was exposed to a burnup of 831 MWD/T during the quarter which brings the tot… more
Date: July 15, 1963
Creator: Robkin, M. A.
Partner: UNT Libraries Government Documents Department
open access

Residual and Fission Gas Release from Uranium Dioxide

Description: Abstract: Residual and fission gas release from UO2 were studied in the laboratory and in in-reactor experiments. Arc-fused powder and sintered pellets were used to determine the rate of evolution and types of residual gases as a function of temperature. Fission gas release was related to the average UO2 temperature and fission gas release calculations were made using the latest thermal conductivity values, isotopic half lives, and branching ratios available in the literature. The results obtai… more
Date: July 15, 1963
Creator: Spalaris, C. N. & Megerth, F. H.
Partner: UNT Libraries Government Documents Department
open access

Sodium-Cooled Reactors Program, Fast Ceramic Reactor Development Program: Seventh Quarterly Report, April-June 1963

Description: Quarterly report discussing progress on the Fast Ceramic Reactor Development Program, "an integrated analytical and experimental program directed toward the development of fast reactors employing ceramic fuels, with particular attention to mixed plutonium-uranium oxide" (p. 1).
Date: July 1963
Creator: Leitz, F. J.
Partner: UNT Libraries Government Documents Department
open access

Specific Zirconium Alloy Design Program Quarterly Progress Report: Fifth Quarter, April - June, 1963

Description: A program is in progress for the design of a zirconium base alloy for steam service as nuclear fuel cladding. Thirty-one alloys selected for study of corrosion rate, hydriding rate and hydrogen embrittlement are in test. The corrosion testing of 1800 coupons to 3000 hours at at 300, 400, and 500 degrees C in refreshed steam has been completed. Statistical data analysis of the corrosion results are reported and alloys showing better corrosion performance at all test temperatures than that for Zi… more
Date: July 1, 1963
Creator: Klepfer, H. H.; Jaech, John L.; Blood, R. E. & Douglass, D. L. (David Leslie), 1931-
Partner: UNT Libraries Government Documents Department
Back to Top of Screen