Search Results

open access

Ceramic Investigations of UO₂

Description: This report covers the progress made on an intensive program to develop and evaluate UO2 as a possible fuel element for the PWR.
Date: June 16, 1955
Creator: Allison, Adrian G. & Duckworth, Winston H.
Partner: UNT Libraries Government Documents Department
open access

Materials Testing Reactor Project Handbook

Description: The following handbook was made for the purpose of: (1) to give a semidetailed description of the testing reactor, and (2) to explain, in so far as possible, the reasons for the design.
Date: May 7, 1951
Creator: Argonne National Laboratory
Partner: UNT Libraries Government Documents Department
open access

Li⁶ and Li⁷ (n. 2n) Cross Sections at 14.1 Mev

Description: Abstract: "An absolute measurement of the 14.1-Mev (n, 2n) cross sections of Li-6 and Li-7 has been made using the large scintillator technique, resulting in cross sections in barns of 0.070 +/- 0.006 and 0.056 +/- 0.005 for Li-6 and Li-7, respectively."
Date: May 29, 1958
Creator: Ashby, V. J.; Catron, H. C.; Newkirk, Lester L.; Taylor, C. J. & Williamson, M. A.
Partner: UNT Libraries Government Documents Department
open access

Electroplated Metals on Uranium for Aluminum Cladding

Description: Abstract: "Aluminum-clad nickel-plated uranium is corrosion resistant in boiling water. Samples with intentional defects in the aluminum-nickel clodding layers, after testing for more than 300 hr. showed no sign of rapid failure. The study of electroplated metals on uranium for aluminum cladding has defined the effects of several processing variables on the corrosion resistance. The quality of the uranium and the quality of the aluminum-nickel bond were important. Heat treatment and vacuum outg… more
Date: May 4, 1955
Creator: Beach, John G.; Schickner, William C.; Hopkinson, Dolores. & Faust, Charles L.
Partner: UNT Libraries Government Documents Department
open access

The Elimination of Microwave Reflections

Description: Abstract: "The reflections of microwaves from the walls of a plasma-containing vessel are studied. The probable cause of the reflections is discussed, and several suggestions are made for eliminating the reflections from the waveguide in the vessel and particularly from the pyrex vessel wall and copper tubing surrounding the pyrex. Quarter-wave-thick carbon-filled plastics or glasses having a very low vapor pressure room most promising when placed inside the pyrex cylinder. BaTiO3 appears to be… more
Date: February 1, 1955
Creator: Beard, David
Partner: UNT Libraries Government Documents Department
open access

Initial Measurements on the Angular Distribution of Deuterium Plasma Produced by a Pulsed Spark Source

Description: Abstract: "The deuterium plasma which is ejected by a 6000-ampere pulsed current through a rail-type spark source has a yield in the forward direction which is a factor of 5 to 10 greater than that in the perpendicular direction. This effect is believed to be due to the magnetic propulsion of the plasma."
Date: March 24, 1955
Creator: Bostick, W. H.
Partner: UNT Libraries Government Documents Department
open access

Measurement of the Behavior of a Plasma in a Magnetic Field by Means of Probes

Description: Abstract: "Probes were used to measure certain properties of the cloud of positive ions and electrons ejected from a pulsed ion source having two hydrogen-loaded electrodes. Time-of-flight measurements show: the presence of H+ ions with 50 ev directed energy; an increase of this energy with increasing pulse current in the source; a higher peak yield of ions with higher peak currents in the source; and higher yields and higher ion energies up to 110 ev have been recorded with the use of a pulsed… more
Date: December 1, 1954
Creator: Bostick, W. H.; Zizzo, S. G. & Cook, Buford
Partner: UNT Libraries Government Documents Department
open access

Magnetic Acceleration of a Plasma by a Rail Source

Description: Abstract: "Two parallel wires close together with an arc between them form a hairpin-type of current configuration which should magnetically propel the plasma of the arc. By the time-of-flight measurements with probes it has been demonstrated that directed translational energies of 290 ev can be imparted to deuterons in a plasma produced by a high-current pulsed arc at the tips of two titanium wires loaded with deuterium. It is believed that three deuterons are actually magnetically propelled."
Date: March 18, 1955
Creator: Bostick, Winston H.
Partner: UNT Libraries Government Documents Department
open access

Process Engineering Report on Production of Thorium at Iowa State College

Description: Technical report presenting the results of a study of the AEC thorium production facilities at Iowa State College, Ames, Iowa. Operating procedures, descriptions of equipment and a production cost analysis have been included in this study.
Date: January 16, 1952
Creator: Bulkowski, H. H.; Holby, G. V.; Pfeiffer, C.; Maerker, J. B. & Winn, F. W.
Partner: UNT Libraries Government Documents Department
open access

Ionium Recovery Plant Design Report: Topical Report

Description: This report documents the study of the recovery of thorium by solvent extraction in pilot plant pulse columns, using a filtered liquor from nitric acid digestions of the raffinate cake produced by the ethyl ether extraction of uranium from pitchblende.
Date: April 15, 1959
Creator: Edwards, R. M.; Fariss, R. H. & Werkema, R. G.
Partner: UNT Libraries Government Documents Department
open access

Transient Temperature Variations During the Self-Heating of a Plasma by Thermonuclear Reactions

Description: Abstract: "The possibility of transient temperature variations during the self-heating of a plasma by thermonuclear reactions was investigated. Calculations were performed on an IBM Card Program Calculator. Estimates of the time scale for self-heating were obtained. It was concluded that it would be unsafe to assume that the nuclear temperature is always equal to or greater than the electron temperature in a discussion of plasma instabilities for a plasma with 10 percent or greater tritium conc… more
Date: March 21, 1955
Creator: Greyber, Howard D.
Partner: UNT Libraries Government Documents Department
open access

Energy Transfer Between Modified Maxwell Distributions

Description: Abstract: "A particularly conventional modified form of Maxwell distribution is chosen. The modified expressions for (a) the energy transfer from the ions to the electrons in a plasma and (b) the brehmestrahlung from the electrons are calculated. Using the expressions some possible steady-state conditions for the ion and electron gases are derived and compared with those for the usual Maxwell distributions."
Date: September 20, 1956
Creator: Greyber, Howard D. & Bing, G.
Partner: UNT Libraries Government Documents Department
open access

Strontium Program: Quarterly Summary Report, May 29, 1959

Description: From Abstract: "This report is one of a sequence of quarterly reports, each designed to up-date its predecessor beginning with HASL-42, "Environmental Contamination from Weapon Tests". Herein are presented data which have accrued since HASL-55. Levels of strontinum-90 in fallout, milk, air, water, vegetation, foods, and bone are given, based on data available from February 1, 1959 to May 20, 1959."
Date: May 29, 1959
Creator: Hardy, Edward P., Jr. & Klein, Stanley
Partner: UNT Libraries Government Documents Department
open access

The Fabrication of Subassemblies for the Supercritical-Water Reactor

Description: In studies of the fabrication of fuel subassemblies for the supercritical-water reactor, the limited ductility of stainless steel-UO₂ fuel sheet made the fabrication of corrugated-flat-plate-type subassemblies impractical. A fabricable MTR-type assembly, 5/8 in. square and 30 in. long, was developed. Methods for edge cladding fuel sheet were developed and a brazing alloy, GE-75, was found to be corrosion resistant in supercritical water.
Date: August 16, 1954
Creator: Keeler, J. R. & Hare, Alan W.
Partner: UNT Libraries Government Documents Department
open access

Energetic Neutral Injection into Thermonuclear Machines

Description: Abstract: "A scheme is discussed in which D+ ions would be accelerated to about 100 kev in a conventional accelerator, then be sent through a gas target frmo which about half the ions would emerge neutral with very little scattering or energy loss; the neutral beam would then cross into a magnetic field and part of the atoms would be ionized and trapped by colliding with the already trapped ions. The smallest mirror machine with a central field of 30-40 kilogauss, 2;1 mirror ratio and β = 01 to… more
Date: August 10, 1955
Creator: Lauer, Eugene J.
Partner: UNT Libraries Government Documents Department
open access

Adiabatic Injection

Description: From introduction comments: The present analysis is intended to examine the relations for "adiabatic" injection in general from a different point of view.
Date: September 22, 1955
Creator: Linlor, William I., 1915-
Partner: UNT Libraries Government Documents Department
open access

FMPC Solvent Treatment Area - Process Design

Description: This memorandum presents the process design for the solvent reast area of the Feed Materials Production Center. The purpose ofthe transmittal is to provide the basis for the detailed mechanical design and layout of this section of the refinery. Drawings, flowsheets, and specifications are included.
Date: July 6, 1951
Creator: Pfeiffer, Carl & Maerker, John B.
Partner: UNT Libraries Government Documents Department
open access

Microwave Diagnostics in ARC Research : On Determination of Physical Quantities of Gas Discharges in Ion-containment Machines by Measurement of Microwave Propagation Coefficient

Description: This report describes a method used to determine semi-quantitatively the time-varying plasma density in magnetic mirror machines by microwave phase-shift and attenuation measurement.
Date: April 1955
Creator: Post, Richard F.; Prosser, T. F. & Wharton, C. B.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen