93 Matching Results

Search Results

Results: 1 - 24 next
open access

Nuclear Port Survey of the State of New York

Description: Report of the capabilities of the state of New York to construct and service atomic propelled vessels and to handle the shipment of packaged radioactive materials, including used nuclear fuels.
Date: November 1961
Creator: Ebasco Services Incorporated
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Fabrication of Subassemblies for the Supercritical-Water Reactor

Description: In studies of the fabrication of fuel subassemblies for the supercritical-water reactor, the limited ductility of stainless steel-UOâ‚‚ fuel sheet made the fabrication of corrugated-flat-plate-type subassemblies impractical. A fabricable MTR-type assembly, 5/8 in. square and 30 in. long, was developed. Methods for edge cladding fuel sheet were developed and a brazing alloy, GE-75, was found to be corrosion resistant in supercritical water.
Date: August 16, 1954
Creator: Keeler, J. R. & Hare, Alan W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Study of Remote Military Power Applications: Report 7, Super Sage Rocky Mountains Area

Description: From introduction: The study is essentially an economic evaluation of the construction and operation of nuclear power plants at several designated military installations where increased power generating capabilities of 5 to 40 mwe may be required by the Government during the period 1963 through 1970.
Date: July 1960
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Study of Remote Military Power Applications: Report 5, NORAD

Description: From introduction: The study is essentially an economic evaluation of the construction and operation of nuclear power plants at several designated military installations where increased power generating capabilities of 5 to 40 mwe may be required by the Government during the period 1963 through 1970.
Date: July 1960
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Ductility of Brazed Stainless Steel Joints

Description: Abstract: "The ductility of Type 310 stainless steel T-joints brazed with GE-62 brazing alloy was measured at room temperatures 1200, 1650, and 1800 F. The measure of ductility was taken as the plastic axial strain required to crack braze fillets in T-section tensile specimens. At elevated temperatures, the ductility of as-brazed joints approximated that of the stainless steel, but at room temperature the brazed joints had only one-tenth the ductility of the base metal. Annealing for 16 hr at 1… more
Date: July 8, 1953
Creator: Saller, Henry A.; Stacy, J. T. & Eddy, N. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Effects of Chemical Impurities on the Quality of Rolled Uranium Rod

Description: Abstract: "Thirty-four uranium ingots containing controlled amounts of carbon, nitrogen, and Mgl2 slag were cast, rolled, and examined to investigate the relation between these impurities and the quality of the rolled rod. Carbon in concentrations up to 1400 ppm and nitrogen up to 170 ppm, either singly or in combination, had no significant effect on the number of defects observed in the rolled rod. The quality of the rods, however decreased with increasing amount of slag necessary to cause obs… more
Date: October 1, 1954
Creator: Saller, Henry A.; Keeler, J. R. & Cuddy, L. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A Nuclear Reactor System for Generating Power and Supplying Steam to a Water Desalination Plant in the Florida Keys

Description: From foreword: The results of an engineering study directed toward the evaluation and selection of a nuclear reactor system designed to produce electricity and furnish steam to a water desalination plant in the Florida Keys are given in this report.
Date: March 1964
Creator: Burns and Roe
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Study of Remote Military Power Applications: Report 4, Thule Air Base, Greenland

Description: From introduction: The study is essentially an economic evaluation of the construction and operation of nuclear power plants at several designated military installations where increased power generating capabilities of 5 to 40 mwe may be required by the Government during the period 1963 through 1970.
Date: July 1960
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Electroplated Metals on Uranium for Aluminum Cladding

Description: Abstract: "Aluminum-clad nickel-plated uranium is corrosion resistant in boiling water. Samples with intentional defects in the aluminum-nickel clodding layers, after testing for more than 300 hr. showed no sign of rapid failure. The study of electroplated metals on uranium for aluminum cladding has defined the effects of several processing variables on the corrosion resistance. The quality of the uranium and the quality of the aluminum-nickel bond were important. Heat treatment and vacuum outg… more
Date: May 4, 1955
Creator: Beach, John G.; Schickner, William C.; Hopkinson, Dolores. & Faust, Charles L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Grain Refinement of the As-Cast Uranium-5 w/o Chromium Alloy by Ternary Additions

Description: Abstract: "Refinement of grain size of the base uranium-chromium eutectic alloy (uranium-5 w/o chromium) by ternary additions is discussed. Thirteen additions to the base alloy were investigated, and three additions were found to exhibit worthwhile grain-refinement tendencies. The three alloys, uranium-5 w/o chromium-0.2 w.o molybdenum, uranium-5 w/o chromium-0.2 w/o germanium, and uranium-5 w/o chromium-0.2 w/o niobium, were heat treated to produce final grain-size structures of between 0.015 … more
Date: July 5, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F.; Murr, William E. & Bauer, Arthur A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Evaluation and Consolidation of Electrolytic Thorium

Description: Abstract: "Sound, fabricable ingots of thorium were produced by triple are melting of electrolytic thorium. Consumable electrodes were fabricated by tack welding of cold-pressed and vacuum-sintered bars of the granular thorium electrodeposited from a molten-salt bath. The hydrogen content of the electrodeposited material was reduced from 80 to 4 ppm by vacuum sintering at 1250 C at pressures below 1 x 10-(-3) mm of mercury. Both sodium and chlorine content were reduced during melting; sodium fr… more
Date: June 15, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F. & Foster, Ellis L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Extrusion Cladding of Fuel Element

Description: From introduction: "This investigation was undertaken with the general objective of determining whether uranium core could be sheathed with aluminum by an extrusion-cladding process. The ultimate objective of this work was to determine the feasibility of extrusion cladding flat plates of uranium."
Date: March 22, 1955
Creator: Slunder, C. J.; Fiorentino, R. J. & Hall, A. M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Preliminary SNAPSHOT-1 Performance Summary

Description: Report presenting the preliminary evaluation test results from the Space Nuclear Auxiliary Power Shot (SNAPSHOT) flight test, launched in April 3, 1965. A flight test description, discussion of the data system, test results, description of system shutdown, and identification of technology gained from the Systems for Nuclear Auxiliary Power (SNAP) 10A flight test are included.
Date: August 1, 1965
Creator: Galantine, R. M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Strontium Program: Quarterly Summary Report, May 29, 1959

Description: From Abstract: "This report is one of a sequence of quarterly reports, each designed to up-date its predecessor beginning with HASL-42, "Environmental Contamination from Weapon Tests". Herein are presented data which have accrued since HASL-55. Levels of strontinum-90 in fallout, milk, air, water, vegetation, foods, and bone are given, based on data available from February 1, 1959 to May 20, 1959."
Date: May 29, 1959
Creator: Hardy, Edward P., Jr. & Klein, Stanley
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Isotec Technology Program: Annual Summary Report for the Period July 1, 1970 Through June 20, 1971

Description: Report summarizing the yearly activities of a General Atomic (GA) program called the Isotec Technology Program, which aims to develop selenide thermoelectric materials to improve the performance and useful life of P-type (Cu,Ag)â‚‚Se and N-type rare earth selenide thermoelectrical materials for the Department of Energy (DOE). The program was generally intended to develop a high-temperature radioisotope thermoelectric generator.
Date: January 26, 1973
Creator: Eisner, N.; Rovner, L.; Staley, G.; Mautz, C. & Leedy, R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen