32 Matching Results

Search Results

Results: 1 - 24 next
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Partner: UNT Libraries Government Documents Department
open access

The Ductility of Brazed Stainless Steel Joints

Description: Abstract: "The ductility of Type 310 stainless steel T-joints brazed with GE-62 brazing alloy was measured at room temperatures 1200, 1650, and 1800 F. The measure of ductility was taken as the plastic axial strain required to crack braze fillets in T-section tensile specimens. At elevated temperatures, the ductility of as-brazed joints approximated that of the stainless steel, but at room temperature the brazed joints had only one-tenth the ductility of the base metal. Annealing for 16 hr at 1… more
Date: July 8, 1953
Creator: Saller, Henry A.; Stacy, J. T. & Eddy, N. S.
Partner: UNT Libraries Government Documents Department
open access

Extrusion Cladding of Fuel Element

Description: From introduction: "This investigation was undertaken with the general objective of determining whether uranium core could be sheathed with aluminum by an extrusion-cladding process. The ultimate objective of this work was to determine the feasibility of extrusion cladding flat plates of uranium."
Date: March 22, 1955
Creator: Slunder, C. J.; Fiorentino, R. J. & Hall, A. M.
Partner: UNT Libraries Government Documents Department
open access

Electroplated Metals on Uranium for Aluminum Cladding

Description: Abstract: "Aluminum-clad nickel-plated uranium is corrosion resistant in boiling water. Samples with intentional defects in the aluminum-nickel clodding layers, after testing for more than 300 hr. showed no sign of rapid failure. The study of electroplated metals on uranium for aluminum cladding has defined the effects of several processing variables on the corrosion resistance. The quality of the uranium and the quality of the aluminum-nickel bond were important. Heat treatment and vacuum outg… more
Date: May 4, 1955
Creator: Beach, John G.; Schickner, William C.; Hopkinson, Dolores. & Faust, Charles L.
Partner: UNT Libraries Government Documents Department
open access

Ceramic Investigations of UO₂

Description: This report covers the progress made on an intensive program to develop and evaluate UO2 as a possible fuel element for the PWR.
Date: June 16, 1955
Creator: Allison, Adrian G. & Duckworth, Winston H.
Partner: UNT Libraries Government Documents Department
open access

The Fabrication of Subassemblies for the Supercritical-Water Reactor

Description: In studies of the fabrication of fuel subassemblies for the supercritical-water reactor, the limited ductility of stainless steel-UO₂ fuel sheet made the fabrication of corrugated-flat-plate-type subassemblies impractical. A fabricable MTR-type assembly, 5/8 in. square and 30 in. long, was developed. Methods for edge cladding fuel sheet were developed and a brazing alloy, GE-75, was found to be corrosion resistant in supercritical water.
Date: August 16, 1954
Creator: Keeler, J. R. & Hare, Alan W.
Partner: UNT Libraries Government Documents Department
open access

The Effects of Chemical Impurities on the Quality of Rolled Uranium Rod

Description: Abstract: "Thirty-four uranium ingots containing controlled amounts of carbon, nitrogen, and Mgl2 slag were cast, rolled, and examined to investigate the relation between these impurities and the quality of the rolled rod. Carbon in concentrations up to 1400 ppm and nitrogen up to 170 ppm, either singly or in combination, had no significant effect on the number of defects observed in the rolled rod. The quality of the rods, however decreased with increasing amount of slag necessary to cause obs… more
Date: October 1, 1954
Creator: Saller, Henry A.; Keeler, J. R. & Cuddy, L. J.
Partner: UNT Libraries Government Documents Department
open access

The tensile strength of solid-state bonded aluminum and nickel-plated uranium

Description: A report intended to aid in the evaluation of solid-state bonding techniques for cladding natural-uranium fuel-element cores with aluminum, tensile specimens which are 1/4 in. in diameter and 3 in. long.
Date: 1954
Creator: Saller, Henry A.; Dickerson, R. F. & Carlson, R. J.
Partner: UNT Libraries Government Documents Department
open access

Uranium Migration in UO₂-Bearing Ceramics

Description: This report follows a preliminary study on uranium migration in pressed and sintered UO2-bearing bodies based on MoSi2 or Al2O3.
Date: September 4, 1953
Creator: Quirk, J. F.; Smalley, A. K.; Duckworth, W. H. & Ferrell, Edward Francis.
Partner: UNT Libraries Government Documents Department
open access

Evaluation and Consolidation of Electrolytic Thorium

Description: Abstract: "Sound, fabricable ingots of thorium were produced by triple are melting of electrolytic thorium. Consumable electrodes were fabricated by tack welding of cold-pressed and vacuum-sintered bars of the granular thorium electrodeposited from a molten-salt bath. The hydrogen content of the electrodeposited material was reduced from 80 to 4 ppm by vacuum sintering at 1250 C at pressures below 1 x 10-(-3) mm of mercury. Both sodium and chlorine content were reduced during melting; sodium fr… more
Date: June 15, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F. & Foster, Ellis L.
Partner: UNT Libraries Government Documents Department
open access

Grain Refinement of the As-Cast Uranium-5 w/o Chromium Alloy by Ternary Additions

Description: Abstract: "Refinement of grain size of the base uranium-chromium eutectic alloy (uranium-5 w/o chromium) by ternary additions is discussed. Thirteen additions to the base alloy were investigated, and three additions were found to exhibit worthwhile grain-refinement tendencies. The three alloys, uranium-5 w/o chromium-0.2 w.o molybdenum, uranium-5 w/o chromium-0.2 w/o germanium, and uranium-5 w/o chromium-0.2 w/o niobium, were heat treated to produce final grain-size structures of between 0.015 … more
Date: July 5, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F.; Murr, William E. & Bauer, Arthur A.
Partner: UNT Libraries Government Documents Department
open access

Further Studies on Large-Batch Melting of Uranium

Description: The following report focuses on an investigation made to determine if vacuum melting was an absolutely necessary step in the metallurgical process of melting and casting uranium.
Date: July 11, 1955
Creator: Rengstorff, George W. & Lownie, Harold W., Jr.
Partner: UNT Libraries Government Documents Department
open access

Measurement of the Behavior of a Plasma in a Magnetic Field by Means of Probes

Description: Abstract: "Probes were used to measure certain properties of the cloud of positive ions and electrons ejected from a pulsed ion source having two hydrogen-loaded electrodes. Time-of-flight measurements show: the presence of H+ ions with 50 ev directed energy; an increase of this energy with increasing pulse current in the source; a higher peak yield of ions with higher peak currents in the source; and higher yields and higher ion energies up to 110 ev have been recorded with the use of a pulsed… more
Date: December 1, 1954
Creator: Bostick, W. H.; Zizzo, S. G. & Cook, Buford
Partner: UNT Libraries Government Documents Department
open access

An "Exact" Analysis of a Cylindrical Plasma in a Magnetic Field

Description: Abstract: "The analysis of an immobilized plasma is here extended to the case where the geometry is cylindrical rather than Cartesian. (This report, UCRL-4439 (Rev, 4 constitutes Part II of the report series (UCRL-4466, Parts I, III, and IV) dealing with this general problem.)"
Date: January 14, 1955
Creator: Tonks, Lewi, 1897-1971
Partner: UNT Libraries Government Documents Department
open access

The Elimination of Microwave Reflections

Description: Abstract: "The reflections of microwaves from the walls of a plasma-containing vessel are studied. The probable cause of the reflections is discussed, and several suggestions are made for eliminating the reflections from the waveguide in the vessel and particularly from the pyrex vessel wall and copper tubing surrounding the pyrex. Quarter-wave-thick carbon-filled plastics or glasses having a very low vapor pressure room most promising when placed inside the pyrex cylinder. BaTiO3 appears to be… more
Date: February 1, 1955
Creator: Beard, David
Partner: UNT Libraries Government Documents Department
open access

High-Energy Peripheral Injection into Mirror Machines

Description: The following report proposes various methods in injecting and heating in mirror machines, using high-energy ion beams.
Date: September 22, 1955
Creator: Linlor, William I., 1915-
Partner: UNT Libraries Government Documents Department
open access

Energy Transfer Between Modified Maxwell Distributions

Description: Abstract: "A particularly conventional modified form of Maxwell distribution is chosen. The modified expressions for (a) the energy transfer from the ions to the electrons in a plasma and (b) the brehmestrahlung from the electrons are calculated. Using the expressions some possible steady-state conditions for the ion and electron gases are derived and compared with those for the usual Maxwell distributions."
Date: September 20, 1956
Creator: Greyber, Howard D. & Bing, G.
Partner: UNT Libraries Government Documents Department
open access

An Exact Analysis of Limited Plane Plasma in a Magnetic Field

Description: Introduction: "Prior analyses of a plasma in a magnetic field have been limited, as far as the writer is aware, to cases in which the relative change in field over the orbital distance and the relative change in ion concentration are both small, or in which the relations have been viewed in a purely hydrodynamical way. The first approach excludes cases which can be of considerable interests, for it fails near a plasma edge. The second loses all sight of the structure imposed by the orbital moti… more
Date: December 2, 1954
Creator: Tonks, Lewi, 1897-1971
Partner: UNT Libraries Government Documents Department
open access

Transient Temperature Variations During the Self-Heating of a Plasma by Thermonuclear Reactions

Description: Abstract: "The possibility of transient temperature variations during the self-heating of a plasma by thermonuclear reactions was investigated. Calculations were performed on an IBM Card Program Calculator. Estimates of the time scale for self-heating were obtained. It was concluded that it would be unsafe to assume that the nuclear temperature is always equal to or greater than the electron temperature in a discussion of plasma instabilities for a plasma with 10 percent or greater tritium conc… more
Date: March 21, 1955
Creator: Greyber, Howard D.
Partner: UNT Libraries Government Documents Department
open access

Microwave Diagnostics in ARC Research : On Determination of Physical Quantities of Gas Discharges in Ion-containment Machines by Measurement of Microwave Propagation Coefficient

Description: This report describes a method used to determine semi-quantitatively the time-varying plasma density in magnetic mirror machines by microwave phase-shift and attenuation measurement.
Date: April 1955
Creator: Post, Richard F.; Prosser, T. F. & Wharton, C. B.
Partner: UNT Libraries Government Documents Department
open access

Magnetic Acceleration of a Plasma by a Rail Source

Description: Abstract: "Two parallel wires close together with an arc between them form a hairpin-type of current configuration which should magnetically propel the plasma of the arc. By the time-of-flight measurements with probes it has been demonstrated that directed translational energies of 290 ev can be imparted to deuterons in a plasma produced by a high-current pulsed arc at the tips of two titanium wires loaded with deuterium. It is believed that three deuterons are actually magnetically propelled."
Date: March 18, 1955
Creator: Bostick, Winston H.
Partner: UNT Libraries Government Documents Department
open access

Energetic Neutral Injection into Thermonuclear Machines

Description: Abstract: "A scheme is discussed in which D+ ions would be accelerated to about 100 kev in a conventional accelerator, then be sent through a gas target frmo which about half the ions would emerge neutral with very little scattering or energy loss; the neutral beam would then cross into a magnetic field and part of the atoms would be ionized and trapped by colliding with the already trapped ions. The smallest mirror machine with a central field of 30-40 kilogauss, 2;1 mirror ratio and β = 01 to… more
Date: August 10, 1955
Creator: Lauer, Eugene J.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen