60 Matching Results

Search Results

Results: 1 - 24 next
open access

Two-Phase Pressure Losses Quarterly Progress Report: Sixth Quarter, May 12, 1963 - August 12, 1963

Description: Technical report describing that the pressure drops along 3/4-inch, 1-inch, and 1-1/4 inch straight pipes and across three contraction-expansion inserts in a 1-inch pipe have been measured under both single- and two-phase flow conditions. Pressure was varied from 600 to 1400 psia, flow from 0.25 x 10(6) to 1.66 x 10(6) lb/hr ft, and quality from zero to 90 percent. The single-phase pipe friction factor agrees with the Moody value for smooth pipe. The two-phase friction for horizontal flow shows… more
Date: September 1, 1963
Creator: Janssen, E. (Engineer) & Kervinen, J. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Quarterly Progress Report, Research and Development Activities Fixation of Radioactive Residues: April-June 1965

Description: Introduction: "This progress report is the twenty-sixth in a series presenting research and development activities in the field of radioactive wastes. Experimental work charged to programs other than those of the Division of Reactor Development is included for general interest and completeness; such work is identified in the headings."
Date: September 1965
Creator: Pacific Northwest Labortoary. Chemistry Department.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Energy Transfer Between Modified Maxwell Distributions

Description: Abstract: "A particularly conventional modified form of Maxwell distribution is chosen. The modified expressions for (a) the energy transfer from the ions to the electrons in a plasma and (b) the brehmestrahlung from the electrons are calculated. Using the expressions some possible steady-state conditions for the ion and electron gases are derived and compared with those for the usual Maxwell distributions."
Date: September 20, 1956
Creator: Greyber, Howard D. & Bing, G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Adiabatic Injection

Description: From introduction comments: The present analysis is intended to examine the relations for "adiabatic" injection in general from a different point of view.
Date: September 22, 1955
Creator: Linlor, William I., 1915-
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Continuous injection processing

Description: From introduction: "In this report we consider a few non-adiabatic processes. The types to be discussed will be limited because of two reasons: first, complete descriptions are available for some processes; second, as time goes on alternative injection methods undoubtedly will be discovered, so this list must necessarily be incomplete."
Date: September 23, 1955
Creator: Linlor, William I., 1915-
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Evaluation of Beta Radiation as a Hydrogenation Catalyst: Interim Technical Status Report for the Period March 1, 1962 to October 31, 1963

Description: From abstract: The concept of using high intensity beta radiation from an isotopic source, Sr-90, inside a high temperature, high pressure chemical reactor has been developed for potential radiation chemical processes. Distinct advantages include high utilizable intensity from a relatively small source with a minimum of shielding against external radiation.
Date: September 11, 1964
Creator: Yavorsky, P. M. & Gorin, E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Carbide Fuels in Fast Reactors

Description: Abstract: Cladding and fuel material processing prospects are reviewed, and fuel system possibilities for near-term (~1 mill/kwh) and long-range (<0.5 mil/kmh) fuel cycles are described.
Date: September 15, 1965
Creator: Wheelock, C. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

OMR Control-Safety Rod Component Development Tests

Description: Abstract: A magnetic-jack control-safety rod is under development for the 45.5 thermal megawatt Organic Moderated Reactor. The rod is "unitized," i.e., the poison element, drive, position indicator, and shock absorber are contained in a compact assembly which is inserted in a regular fuel channel opening in the core. Tests to develop components capable of operating under these conditions are described and results are reported.
Date: September 15, 1959
Creator: Howell, J. D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Materials for Fluorine Generator Anode Assemblies

Description: Corrosion of anode assembly materials in fluorine generators is pronounced, therefore, selection of the proper materials for construction is important. Several metals and alloys have been tested for corrosion resistance when anodic in a fluorine test cell. In general, copper, copper alloys and magnesium alloys offer the best corrosion resistance.
Date: September 28, 1956
Creator: Simmons, R. E.; Rossmassler, W. R.; Hoskins, C. W. & Johnston, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen