300 Matching Results

Search Results

Results: 1 - 24 next
open access

Determination of boundary-layer transition on three symmetrical airfoils in the NACA full-scale wind tunnel

Description: For the purpose of studying the transition from laminar to turbulent flow, boundary-layer measurements were made in the NACA full-scale wind tunnel on three symmetrical airfoils of NACA 0009, 0012, and 0018 sections. The effects of variations in lift coefficient, Reynolds number, and airfoil thickness on transition were investigated. Air speed in the boundary layer was measured by total-head tubes and by hot wires; a comparison of transition as indicated by the two techniques was obtained. The … more
Date: May 26, 1938
Creator: Silverstein, Abe & Becker, John V.
Partner: UNT Libraries Government Documents Department
open access

Development of Equipment for the Purification of Mercury by Distillation

Description: Abstract: "An investigation of the mercury salvage program has resulted in the development of an improved high compacity type of distillation apparatus. The still, electrically heated and essentially automatic in its operation, will produce at a rate greater than 75 pounds per hour and develop a product 99.99% pure or better. This still will handle the lowest grade crude of amalgam that can pass through the feed lines and will continue to develop a pure prodcut for comparatively long periods of… more
Date: May 26, 1945
Creator: Lee, J. E. & Susano, C. D.
Partner: UNT Libraries Government Documents Department
open access

Progress Report on Corrosion Tests in TCl₄

Description: This report describes progress in testing the corrosion resistance of alloys of TCl₄. The steps and conditions of the testing procedures are given as well as conclusions and photos of TCl₄.
Date: May 26, 1945
Creator: Mash, Donald R.
Partner: UNT Libraries Government Documents Department
open access

Effects of a Fuselage and Various High-Lift and Stall-Control Flaps on Aerodynamic Characteristics in Pitch of an NACA 64-Series 40 Degree Swept-Back Wing

Description: Report presenting wind-tunnel testing to determine the low-speed lift, drag, and pitching-moment characteristics of a 40 degree sweptback wing with high-lift and stall-control flaps and a fuselage with a fineness ratio of 10.2 to 1. Low, medium, and high-wing-fuselage combinations were tested at high Reynolds numbers. Results regarding the high-lift and stall-control flaps and wing-fuselage combinations are provided.
Date: May 26, 1947
Creator: Conner, D. William & Neely, Robert H.
Partner: UNT Libraries Government Documents Department
open access

Further investigation of NACA 4-(5)(08)-03 two-blade propeller at high forward speeds

Description: Report presenting tests of an NACA 4-(5)(08)-03 two-blade propeller in the 8-foot high-speed tunnel for blade angles of 45 and 60 degrees extending the Mach number range from that of previous tests of the propeller up to Mach number 0.913. When the forward speed was increased from a low value to a forward Mach number of 0.90, the loss in peak efficiency was found to be not more than 47 percent.
Date: May 26, 1947
Creator: Carmel, Melvin M. & Robinson, Harold L.
Partner: UNT Libraries Government Documents Department
open access

Spin and Recovery Characteristics of the Curtiss-Wright XP-87 Airplane

Description: "The spin and recovery characteristics of the Curtiss-Wright XP-87 airplane, as well as the spin-recovery parachute requirements, the control forces that would be encountered in the spin, and the best method for the crew to attempt an emergency escape, are presented in this report. The characteristics were estimated rather than determined by model tests because the XP-87 dimensional and mass characteristics were considered to be noncritical and because data were available from model tests of se… more
Date: May 26, 1947
Creator: Berman, Theodore
Partner: UNT Libraries Government Documents Department
open access

Physico-chemical Studies of U-Compounds in Solution : Progress Report, February 1945

Description: This progress report discusses progress on oxidation-reduction studies, including polarography, as well as the Uranium-complex formation including electrical transport and spectro-photometric work. This report covers the work done in the period of February of 1945.
Date: May 26, 1948
Creator: Tishkoff, G. H. & Fanta, Paul E.
Partner: UNT Libraries Government Documents Department
open access

Theoretical performance of some rocket propellants containing hydrogen, nitrogen, and oxygen

Description: From Summary: "Theoretical performance data including nozzle-exit temperature, specific impulse, volume specific impulse and composition, temperature, and mean molecular weight of reaction products based on frozen equilibrium and isentropic expansion are presented for 13 propellant combinations at reaction pressure of 300 pounds per square inch absolute and expansion ratio of 20.4. On basis of maximum specific impulse alone, five fuels had the following order for any given oxidant: liquid hydro… more
Date: May 26, 1948
Creator: Miller, Riley O. & Ordin, Paul M.
Partner: UNT Libraries Government Documents Department
open access

Experimental investigation of hot-gas bleedback for ice protection of turbojet engines 2: nacelle with long straight air inlet

Description: Report presenting aerodynamic and icing investigations conducted in the icing research tunnel on a model of a turbojet-engine nacelle with a long straight air inlet in order to provide basic design criteria for hot-gas blowback systems. The most uniform temperature distribution was obtained with a bleedback of 4.4 percent at a gas temperature of 1000 degrees Fahrenheit and resulted in an average dry-air-temperature rise of 46 degrees Fahrenheit.
Date: May 26, 1949
Creator: Callaghan, Edmund E. & Ruggeri, Robert S.
Partner: UNT Libraries Government Documents Department
open access

Investigation of several clamshell variable-area exhaust nozzles for turbojet engines

Description: Report presenting the results of several investigations of the performance of different types of clamshell variable-area exhaust nozzle far turbojet engines to determine the efficiency of that type of exhaust nozzle as compared with conventional fixed-area conical exhaust nozzles. The investigations were conducted at zero-ram sea level conditions on three different full-scale turbojet engines and using five different nozzles.
Date: May 26, 1949
Creator: Lundin, Bruce T.
Partner: UNT Libraries Government Documents Department
open access

Fabrication and Properties of Hot-Pressed Molybdenum Disilicide

Description: Report presenting an investigation of hot-pressed molbdenum disilicide bodies produced by industrial processes at a temperature of 2950 degrees and a pressure of 3000 pounds per square inch. Results regarding the short-time tensile strength, stress-rupture data, compression strength, air-corrosion resistance, hardness, coefficient of linear thermal expansion, thermal conductivity, and density are provided.
Date: May 26, 1950
Creator: Long, Roger A.
Partner: UNT Libraries Government Documents Department
open access

Flight Investigation of the Aileron Characteristics of the Douglas D-558-I Airplane (BuAero No. 37972) at Mach Numbers Between 0.6 and 0.89

Description: "Abrupt, rudder-fixed aileron rolls have been made with the Douglas D-558-I airplane (BuAero No. 37972) at Mach numbers between 0.6 and 0.89. Rolls were made at aileron deflections between one-eighth and one-half the maximum available deflection. The results obtained indicate that the aileron effectiveness is independent of Mach number and deflection within the range investigated" (p. 1).
Date: May 26, 1950
Creator: Thompson, Jim Rogers; Roden, William S. & Eggleston, John M.
Partner: UNT Libraries Government Documents Department
open access

Survey of Nonmetallic Liquid Coolants for Nuclear-Power Piles

Description: A comprehensive survey of the literature was made in an effort to identify nonmetallic materials of possible usefulness as liquid coolants. Materials having maximum melting points of 1000 deg F and boiling points of l200 deg F were considered, but boiling points above 2200 deg F were preferred. Melting points, boiling points, densities, heat capacities, and thermal conductivities were tabulated. Approximately 190 materials appeared to have melting and boiling temperatures in a suitable range. A… more
Date: May 26, 1950
Creator: Shaw, H.L. & Boulger, F.W.
Partner: UNT Libraries Government Documents Department
open access

Wing-dropping characteristics of some straight and swept wings at transonic speeds as determined with rocket-powered models

Description: Report presenting data gathered on a lateral-trim change or wing dropping that involves a rapid change of lateral trim with Mach number, which has occurred on several rocket-powered models used in roll investigations at transonic speeds. The data in this report demonstrates that straight wings with airfoil sections 9 percent thick or greater are susceptible to wing dropping between Mach numbers of 0.9 and 1.0. Results for straight, sweptback, and delta wings are provided.
Date: May 26, 1950
Creator: Stone, David G.
Partner: UNT Libraries Government Documents Department
open access

Boundary Disturbances in High Explosive Shock Tubes

Description: From abstract: High velocity disturbances are observed to propagate along the walls of a high explosive operated shock tube in advance of the plane shock. Experiments are presented which determine the dependence of the geometry, energy, and velocity of the disturbance on such variables as the gas contained in the shock tube, the shock strength, and the roughness and composition of the supporting boundary. A model is constructed to explain the flow within the disturbance. Arguments are presented… more
Date: May 26, 1952
Creator: Shreffler, R. G. & Christian, R. H.
Partner: UNT Libraries Government Documents Department
open access

A Large Diameter Vacuum Valve

Description: During the preliminary operaton of a volatilization apparatus it became apparent that a large stopcock in the high vacuum side of the oil diffusion pump was quite unsatisfactory. Since it was necessary to mount the stopcock in a relatively inaccessible location, the difficulty of turning the plug and the consequent necessity of regreasing the valve approximately every week were real problems. Also, it became apparent that an increased pumping speed through the valve would be required. Since a l… more
Date: May 26, 1952
Creator: Foster, K. W.
Partner: UNT Libraries Government Documents Department
open access

The Surface Reaction Between Oxygen and Thorium

Description: Abstract: The rate of reaction of oxygen with arc-melted and rolled iodide thorium has been found to obey the parabolic rate law in the temperature range of 850 to 1415 C at 1 atmosphere pressure. The rate constant can be expressed as k = 6 x 10⁷ x e⁻⁶³³⁰⁰/RT cm²/sec. The energy of activation, 63,300 cal/mole, has a probable error of 2,100 cal/mole.
Date: May 26, 1953
Creator: Gerds, A. F. & Mallett, Manley William, 1909-
Partner: UNT Libraries Government Documents Department
open access

The Effect of Blunt-Trailing-Edge Modifications on the High-Speed Stability and Control Characteristics of a Swept-Wing Fighter Airplane

Description: An investigation was conducted on a 35 deg swept-wing fighter airplane to determine the effects of several blunt-trailing-edge modifications to the wing and tail on the high-speed stability and control characteristics and tracking performance. The results indicated significant improvement in the pitch-up characteristics for the blunt-aileron configuration at Mach numbers around 0.90. As a result of increased effectiveness of the blunt-trailing-edge aileron, the roll-off, customarily experienced… more
Date: May 26, 1954
Creator: Sadoff, Melvin; Matteson, Frederick H. & Van Dyke, Rudolph D., Jr.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen