Search Results

open access

A 3-D SAR approach to IFSAR processing

Description: Interferometric SAR (IFSAR) can be shown to be a special case of 3-D SAR image formation. In fact, traditional IFSAR processing results in the equivalent of merely a super-resolved, under-sampled, 3-D SAR image. However, when approached as a 3-D SAR problem, a number of IFSAR properties and anomalies are easily explained. For example, IFSAR decorrelation with height is merely ordinary migration in 3-D SAR. Consequently, treating IFSAR as a 3-D SAR problem allows insight and development of proper motion compensation techniques and image formation operations to facilitate optimal height estimation. Furthermore, multiple antenna phase centers and baselines are easily incorporated into this formulation, providing essentially a sparse array in the elevation dimension. This paper shows the Polar Format image formation algorithm extended to 3 dimensions, and then proceeds to apply it to the IFSAR collection geometry. This suggests a more optimal reordering of the traditional IFSAR processing steps.
Date: March 1, 2000
Creator: DOERRY,ARMIN W. & BICKEL,DOUGLAS L.
Partner: UNT Libraries Government Documents Department
open access

241-AZ-101 Mixer Pump Demonstration Test Gamma Cart Acceptance Test Procedure and Quality Test Plan (ATP and QTP)

Description: Shop Test of the Gamma Cart System to be used in the AZ-101 Mixer Pump Demonstration Test. Tests hardware and software. This procedure involves testing the Instrumentation involved with the Gamma Cart System, local and remote, including: depth indicators, speed controls, interface to data acquisition software and the raising and lowering functions. This Procedure will be performed twice, once for each Gamma Cart System. This procedure does not test the accuracy of the data acquisition software.
Date: March 2000
Creator: White, D. A.
Partner: UNT Libraries Government Documents Department
open access

1996 Savannah River Site annual epidemiologic surveillance report

Description: This report provides a summary of epidemiologic surveillance data collected from Savannah River Site from January 1, 1996 through December 31, 1996. The data were collected by a coordinator at Savannah River Site and submitted to the Epidemiologic Surveillance Data Center located at Oak Ridge Institute for Science and Education, where quality control procedures and preliminary data analyses were carried out. The analyses were interpreted and the final report prepared by the DOE Office of Epidemiologic Studies. The information in this report provides highlights of the data analyses conducted on the 1996 data collected from Savannah River Site. The main sections of the report include: work force characteristics; absences due to injury or illness lasting 5 or more consecutive workdays; workplace illnesses, injuries, and deaths that were reportable to the Occupational Safety and Health Administration (''OSHA-recordable'' events); and disabilities and deaths among current workers. The 1996 report includes a new section on time trends that provides comparative information on the health of the work force from 1994 through 1996.
Date: March 1, 2000
Partner: UNT Libraries Government Documents Department
open access

1999 Accountability Report

Description: A report including the United States Agency for International Development's financial statements and the inspector general's opinion on the statements, internal controls, and compliance with law and regulations. It also highlights the effectiveness of the Agency's programs in achieving U.S. foreign policy objectives.
Date: March 1, 2000
Creator: United States. Agency for International Development.
Partner: UNT Libraries Government Documents Department
open access

1999 Annual Report on Waste Generation and Pollution Prevention Progress as Required by DOE Order 5400.1

Description: Hanford's missions are to safely clean-up and manage the site's legacy wastes, and to develop and deploy science and technology. Through these missions Hanford will contribute to economic diversification of the region. Hanford's environmental management or clean-up mission is to protect the health and safety of the public, workers, and the environment; control hazardous materials; and utilize the assets (people, infrastructure, and site) for other missions. Hanford's science and technology mission is to develop and deploy science and technology in the service of the nation including stewardship of the Hanford Site. Pollution Prevention is a key to the success of these missions by reducing the amount of waste to be managed and identifying/implementing cost effective waste reduction projects. Hanford's original mission, the production of nuclear materials for the nation's defense programs, lasted more than 40 years, and like most manufacturing operations, Hanford's operations generated large quantities of waste and pollution. However, the by-products from Hanford operations pose unique problems like radiation hazards, vast volumes of contaminated water and soil, and many contaminated structures including reactors, chemical plants and evaporation ponds. The clean-up activity is an immense and challenging undertaking. Including characterization and decommissioning of 149 single shell storage tanks, treating 28 double shell tanks, safely disposing of over 2,100 metric tons of spent nuclear fuel stored on site, removing numerous structures, and dealing with significant solid waste, ground water, and land restoration issues.
Date: March 1, 2000
Creator: SEGALL, P.
Partner: UNT Libraries Government Documents Department
open access

1999 data report: Groundwater monitoring program Area 5 Radioactive Waste Management Site

Description: This report is a compilation of the annual 1999 groundwater sampling results from the Area 5 Radioactive Waste Management Site (RWMS). Contamination indicator data are presented in control chart and tabular form with investigation levels indicated. Gross water chemistry data are presented in graphical and tabular form. Other information in the report includes, the Cumulative Chronology for Area 5 RWMS Groundwater Monitoring Program, a brief description of the site hydrogeology and the groundwater sampling procedure. Wells Ue5PW-1, Ue5PW-2, and Ue5PW-3 were sampled semiannually for pH, specific conductance, major cations/anions, metals, tritium, total organic carbon (TOC), and total organic halogen (TOX). Results indicate that there has been no measurable impact to the uppermost aquifer from the Resource Conservation and Recovery Act (RCRA) regulated unit within the Area 5 RWMS. Groundwater elevation was monitored quarterly with no major changes noted. There continues to be an extremely small gradient to the northeast with a flow velocity less than one foot per year; however, this is subject to change because the wells have a similar groundwater elevation.
Date: March 2000
Creator: Townsend, Yvonne
Partner: UNT Libraries Government Documents Department
open access

Abuse tests on sealed lead-acid batteries

Description: Abuse tests were conducted on the lead-acid batteries used to power electrical testers used at the Department of Energy's Pantex Plant. Batteries were subjected to short circuits, crushes, penetrations, and drops. None of the observed responses would be a threat to nuclear explosive safety in a bay or cell at Pantex. Temperatures, currents, and damage were measured and recorded during the tests.
Date: March 1, 2000
Creator: LOESCHER,DOUGLAS H.; CRAFTS,CHRIS C. & UNKELHAEUSER,TERRY M.
Partner: UNT Libraries Government Documents Department
open access

The Adiabatic Matching Section Solution for the Source Injector

Description: Typical designs for a Heavy Ion Fusion Power Plant require the source injector to deliver 100 beams, packed into an array with a spacing of 7 cm. When designing source injectors using a single large aperture source for each beam, the emitter surfaces are packed into an array with a spacing of 30 cm. Thus, the matching section of the source injector must not only prepare the beam for transport in a FODO lattice, but also funnel the beams together. This can be accomplished by an ESQ matching section in which each beam travels on average at a slight angle to the axis of the quadrupoles and uses the focusing effect of the FODO lattice to maintain the angle. At the end of the matching section, doublet steering is used to bring the beams parallel to each other for injection into the main accelerator. A specific solution of this type for an 84-beam source injector is presented.
Date: March 1, 2000
Creator: Ahle, L.; Grote, D. P.; Halaza, E.; Henestroza, E.; Kwan, J. W. & MacLaren, S. A.
Partner: UNT Libraries Government Documents Department
open access

ADVANCED DIRECT LIQUEFACTION CONCEPTS FOR PETC GENERIC UNITS

Description: The results of Laboratory and Bench-Scale experiments and supporting technical and economic assessments conducted under DOE Contract No. DE-ACC22-91PC91040 is reported for the period January 1, 1999 to March 31, 2000. This work involves the introduction into the basic two-stage liquefaction process several novel concepts, which include dispersed lower-cost catalysts, coal cleaning by oil agglomeration, and distillate hydrotreating and dewaxing. This project has been modified to include an investigation into the production of value added materials from coal using liquefaction based technologies.
Date: March 1, 2000
Creator: Berkovich, Adam J.
Partner: UNT Libraries Government Documents Department
open access

ADVANCED DIRECT LIQUEFACTION CONCEPTS FOR PETC GENERIC UNITS

Description: The results of Laboratory and Bench-Scale experiments and supporting technical and economic assessments conducted under DOE Contract No. DE-AC22-91PC91040 is reported for the period April 1, 1998 to June 30, 1998. This contract is with the University of kentucky Research Foundation, which supports work with the University of Kentucky Center for Applied Energy Researc, CONSOL, Inc., LDP Associates, and Hydrocarbon Technologies, Inc. This work involves the introduction into the basic two-stage liquefaction process several novel concepts, which include dispersed lower-cost catalysts, coal cleaning by oil agglomeration, and distillate hydrotreating and dewaxing.
Date: March 1, 2000
Creator: Berkovich, Adam J.
Partner: UNT Libraries Government Documents Department
open access

ADVANCED DIRECT LIQUEFACTION CONCEPTS FOR PETC GENERIC UNITS

Description: The results of Laboratory and Bench-Scale experiments and supporting technical and economic assessments conducted under DOE Contract No. DE-AC22-91PC91040 is reported for the period April 1, 1998 to June 30, 1998. This contract is with the University of kentucky Research Foundation, which supports work with the University of Kentucky Center for Applied Energy Researc, CONSOL, Inc., LDP Associates, and Hydrocarbon Technologies, Inc. This work involves the introduction into the basic two-stage liquefaction process several novel concepts, which include dispersed lower-cost catalysts, coal cleaning by oil agglomeration, and distillate hydrotreating and dewaxing.
Date: March 1, 2000
Creator: Berkovich, Adam J.
Partner: UNT Libraries Government Documents Department
open access

ADVANCED DIRECT LIQUEFACTION CONCEPTS FOR PETC GENERIC UNITS

Description: The results of Laboratory and Bench-Scale experiments and supporting technical and economic assessments conducted under DOE Contract No. DE-AC22-91PC91040 is reported for the period April 1, 1998 to June 30, 1998. This contract is with the University of kentucky Research Foundation, which supports work with the University of Kentucky Center for Applied Energy Researc, CONSOL, Inc., LDP Associates, and Hydrocarbon Technologies, Inc. This work involves the introduction into the basic two-stage liquefaction process several novel concepts, which include dispersed lower-cost catalysts, coal cleaning by oil agglomeration, and distillate hydrotreating and dewaxing.
Date: March 1, 2000
Creator: Berkovich, Adam J.
Partner: UNT Libraries Government Documents Department
open access

All-vapor processing of P-type tellurium-containing II-VI semiconductor and ohmic contacts thereof

Description: An all dry method for producing solar cells is provided comprising first heat-annealing a II-VI semiconductor; enhancing the conductivity and grain size of the annealed layer; modifying the surface and depositing a tellurium layer onto the enhanced layer; and then depositing copper onto the tellurium layer so as to produce a copper tellurium compound on the layer.
Date: March 1, 2000
Creator: McCandless, Brian E.
Partner: UNT Libraries Government Documents Department
open access

Alumina composites for oxide/oxide fibrous monoliths

Description: Most work on ceramic fibrous monoliths (FMs) has focused on the Si{sub 3}N{sub 4}/BN system. In an effort to develop oxidation-resistant FMs, several oxide systems have recently been examined. Zirconia-toughened alumina and alumina/mullite appear to be good candidates for the cell phase of FMs. These composites offer higher strength and toughness than pure alumina and good high-temperature stability. By combining these oxides, possibly with a weaker high-temperature oxide as the cell-boundary phase, it should be possible to product a strong, resilient FM that exhibits graceful failure. Several material combinations have been examined. Results on FM fabrication and microstructural development are presented.
Date: March 1, 2000
Creator: Cruse, T. A.; Polzin, B. J.; Picciolo, J. J.; Singh, D.; Tsaliagos, R. N. & Goretta, K. C.
Partner: UNT Libraries Government Documents Department
open access

Americium separations from high salt solutions

Description: Americium (III) exhibits an unexpectedly high affinity for anion-exchange material from the high-salt evaporator bottoms solutions--an effect which has not been duplicated using simple salt solutions. Similar behavior is observed for its lanthanide homologue, Nd(III), in complex evaporator bottoms surrogate solutions. There appears to be no single controlling factor--acid concentration, total nitrate concentration or solution ionic strength--which accounts for the approximately 2-fold increase in retention of the trivalent ions from complex solutions relative to simple solutions. Calculation of species activities (i.e., water, proton and nitrate) in such concentrated mixed salt solutions is difficult and of questionable accuracy, but it is likely that the answer to forcing formation of anionic nitrate complexes of americium lies in the relative activities of water and nitrate. From a practical viewpoint, the modest americium removal needs (ca. 50--75%) from nitric acid evaporator bottoms allow sufficient latitude for the use of non-optimized conditions such as running existing columns filled with older, well-used Reillex HPQ. Newer materials, such as HPQ-100 and the experimental bifunctional resins, which exhibit higher distribution coefficients, would allow for either increased Am removal or the use of smaller columns. It is also of interest that one of the experimental neutral-donor solid-support extractants, DHDECMP, exhibits a similarly high level of americium (total alpha) removal from EV bottoms and is much less sensitive to total acid content than commercially-available material.
Date: March 1, 2000
Creator: Barr, Mary E.; Jarvinen, Gordon D.; Schulte, Louis D.; Stark, Peter C.; Chamberlin, Rebecca M.; Abney, Kent D. et al.
Partner: UNT Libraries Government Documents Department
open access

Analysis of molecular expression patterns and integration with other knowledge bases using probabilistic Bayesian network models

Description: How can molecular expression experiments be interpreted with greater than ten to the fourth measurements per chip? How can one get the most quantitative information possible from the experimental data with good confidence? These are important questions whose solutions require an interdisciplinary combination of molecular and cellular biology, computer science, statistics, and complex systems analysis. The explosion of data from microarray techniques present the problem of interpreting the experiments. The availability of large-scale knowledge bases provide the opportunity to maximize the information extracted from these experiments. We have developed new methods of discovering biological function, metabolic pathways, and regulatory networks from these data and knowledge bases. These techniques are applicable to analyses for biomedical engineering, clinical, and fundamental cell and molecular biology studies. Our approach uses probabilistic, computational methods that give quantitative interpretations of data in a biological context. We have selected Bayesian statistical models with graphical network representations as a framework for our methods. As a first step, we use a nave Bayesian classifier to identify statistically significant patterns in gene expression data. We have developed methods which allow us to (a) characterize which genes or experiments distinguish each class from the others, (b) cross-index the resulting classes with other databases to assess biological meaning of the classes, and (c) display a gross overview of cellular dynamics. We have developed a number of visualization tools to convey the results. We report here our methods of classification and our first attempts at integrating the data and other knowledge bases together with new visualization tools. We demonstrate the utility of these methods and tools by analysis of a series of yeast cDNA microarray data and to a set of cancerous/normal sample data from colon cancer patients. We discuss extending our methods to inferring biological pathways and networks using more complex dynamic …
Date: March 1, 2000
Creator: Moler, Edward J. & Mian, I.S.
Partner: UNT Libraries Government Documents Department
open access

Application of Integrated Reservoir Management and Reservoir Characterization

Description: Reservoir performance and characterization are vital parameters during the development phase of a project. Infill drilling of wells on a uniform spacing, without regard to characterization does not optimize development because it fails to account for the complex nature of reservoir heterogeneities present in many low permeability reservoirs, especially carbonate reservoirs. These reservoirs are typically characterized by: (1) large, discontinuous pay intervals; (2) vertical and lateral changes in reservoir properties; (3) low reservoir energy; (4) high residual oil saturation; and (5) low recovery efficiency. The operational problems they encounter in these types of reservoirs include: (1) poor or inadequate completions and stimulations; (2) early water breakthrough; (3) poor reservoir sweep efficiency in contacting oil throughout the reservoir as well as in the nearby well regions; (4) channeling of injected fluids due to preferential fracturing caused by excessive injection rates; and (5) limited data availability and poor data quality. Infill drilling operations only need target areas of the reservoir which will be economically successful. If the most productive areas of a reservoir can be accurately identified by combining the results of geological, petrophysical, reservoir performance, and pressure transient analyses, then this ''integrated'' approach can be used to optimize reservoir performance during secondary and tertiary recovery operations without resorting to ''blanket'' infill drilling methods. New and emerging technologies such as geostatistical modeling, rock typing, and rigorous decline type curve analysis can be used to quantify reservoir quality and the degree of interwell communication. These results can then be used to develop a 3-D simulation model for prediction of infill locations. The application of reservoir surveillance techniques to identify additional reservoir ''pay'' zones, and to monitor pressure and preferential fluid movement in the reservoir is demonstrated. These techniques are: long-term production and injection data analysis, pressure transient analysis, and advanced open and cased …
Date: March 1, 2000
Creator: Bergeron, Jack; Blasingame, Tom; Doublet, Louis; Kelkar, Mohan; Freeman, George; Callard, Jeff et al.
Partner: UNT Libraries Government Documents Department
open access

Arc-Discharge Ion Sources for Heavy Ion Fusion

Description: A miniature multiple beamlet approach to an injector system was recently proposed in order to reduce the size, cost, and power requirements of the injector. The beamlets of very high current density are needed to meet the brightness requirement. Besides vacuum arc ion sources, cold-cathode gas ion sources are candidates for this application. Vacuum-arc metal ion sources and vacuum-arc-like gas ion sources are discussed. Experiments are presented that focus on the short-pulse plasma composition and ion charge state distribution. Mg and Sr have been identified as the most promising metals leading to mono-species beams when 20 {mu}s arc pulses are used. It is shown that the efficient production of gas ions requires the presence of a magnetic field.
Date: March 1, 2000
Creator: Anders, A. & Kwan, J. W.
Partner: UNT Libraries Government Documents Department
open access

Asymmetric quarks in the proton

Description: Asymmetries in the quark momentum distributions in the proton reveal fundamental aspects of strong interaction physics. Differences between {anti u} and {anti d} quarks in the proton sea provide insight into the dynamics of the pion cloud around the nucleon and the nature of chiral symmetry breaking. Polarized flavor asymmetries allow the effects of pion clouds to be disentangled from those of antisymmetrization. Asymmetries between s and {anti s} quark distributions in the nucleon are also predicted from the chiral properties of QCD.
Date: March 1, 2000
Creator: Melnitchouk, W.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen