Search Results

open access

3.1.1.2 Feed Processing and Handling DL2 Final Report

Description: This milestone report is the deliverable for our Feed Processing and Handling project. It includes results of wet biomass feedstock analysis, slurry pumping information, fungal processing to produce a lignin-rich biorefinery residue and two subcontracted efforts to quantify the amount of wet biomass feedstocks currently available within the corn processing and paper processing industries.
Date: September 30, 2006
Creator: Elliott, Douglas C.; Magnuson, Jon K. & Wend, Christopher F.
Partner: UNT Libraries Government Documents Department
open access

200-BP-1 Prototype Hanford Barrier -- 15 Years of Performance Monitoring

Description: Monitoring is an essential component of engineered barrier system design and operation. A composite capacitive cover, including a capillary break and an evapotranspiration (ET) barrier at the Hanford Site, is generating data that can be used to help resolve these issues. The prototype Hanford barrier was constructed over the 216-B-57 Crib in 1994 to evaluate surface-barrier constructability, construction costs, and physical and hydrologic performance at the field scale. The barrier has been routinely monitored between November 1994 and September 1998 as part of a Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) treatability test of barrier performance for the 200 BP 1 Operable Unit. Since FY 1998, monitoring has focused on a more limited set of key water balance, stability, and biotic parameters. In FY 2009, data collection was focused on: (1) water-balance monitoring, consisting of precipitation, runoff, soil moisture storage, and drainage measurements with evapotranspiration calculated by difference; (2) stability monitoring, consisting of asphalt-layer-settlement, basalt-side-slope-stability, and surface-elevation measurements; (3) vegetation dynamics; and (4) animal use. September 2009 marked 15 years since the start of monitoring and the collection of performance data. This report describes the results of monitoring activities during the period October 1, 2008, through September 30, 2009, and summarizes the 15 years of performance data collected from September 1994 through September 2009.
Date: September 30, 2011
Creator: Ward, Anderson L.; Draper, Kathryn E.; Link, Steven O. & Clayton, Ray E.
Partner: UNT Libraries Government Documents Department
open access

242-A Campaign 94-1 post run document

Description: The purpose of this post-run document is to summarize the results of 242-A Evaporator Campaign 94-1 as required. Campaign 94-1 represents the first Evaporator operation since 1989, following completion of the B-534 upgrades and Liquid Effluent Retention Facility (LERF) construction. The purpose of Campaign 94-1 was to concentrate dilute waste from TK-102-AW, TK-106-AW, and TK-103-AP. From an available 2.87 million gallon feedstock of dilute waste contained in 102-AW, 106-AW and 103-AP, an overall Waste Volume Reduction (WVR) of 2.39 million gallons (83% WVRF) was achieved. At the completion of the campaign, approximately 477,000 gallons of dilute double-shell slurry feed (DDSSF) was produced with a SpG. of 1.25--1.30. Total process condensate discharged to LERF was 3.09 million gallons, achieving a condensate/WVR ratio of 1.29. Throughput for Campaign 94-1 was 5.27 million gallons. Total steam condensate and cooling water discharge to B-pond was 4.7 and 216 million gallons respectively. The evaporator operated approximately 43 days of the 60 day campaign for a total operating efficiency of 73%. Campaign 94-1 was completed without any discharge limit, Operating Specification Document, or Operational Safety Requirement violations. Major problems encountered during the run included the following: (1) high CA1 deentrainment pad dP`s caused by foaming, (2) condensate pump P-C100 failure, and (3) ion exchange column dP`s and efficiency.
Date: September 30, 1994
Creator: Guthrie, M. D.
Partner: UNT Libraries Government Documents Department
open access

300 Area Treatability Test: Laboratory Development of Polyphosphate Remediation Technology for In Situ Treatment of Uranium Contamination in the Vadose Zone and Capillary Fringe

Description: This report presents results from bench-scale treatability studies conducted under site-specific conditions to optimize the polyphosphate amendment for implementation of a field-scale technology demonstration to stabilize uranium within the 300 Area vadose and smear zones of the Hanford Site. The general treatability testing approach consisted of conducting studies with site sediment and under site conditions, to develop an effective chemical formulation and infiltration approach for the polyphosphate amendment under site conditions. Laboratory-scale dynamic column tests were used to 1) quantify the retardation of polyphosphate and its degradation products as a function of water content, 2) determine the rate of polyphosphate degradation under unsaturated conditions, 3) develop an understanding of the mechanism of autunite formation via the reaction of solid phase calcite-bound uranium and aqueous polyphosphate remediation technology, 4) develop an understanding of the transformation mechanism, the identity of secondary phases, and the kinetics of the reaction between uranyl-carbonate and -silicate minerals with the polyphosphate remedy under solubility-limiting conditions, and 5) quantify the extent and rate of uranium released and immobilized based on the infiltration rate of the polyphosphate remedy and the effect of and periodic wet-dry cycling on the efficacy of polyphosphate remediation for uranium in the vadose zone and smear zone.
Date: September 30, 2008
Creator: Wellman, Dawn M.; Pierce, Eric M.; Bacon, Diana H.; Oostrom, Martinus; Gunderson, Katie M.; Webb, Samuel M. et al.
Partner: UNT Libraries Government Documents Department
open access

L-325 Sagebrush Habitat Mitigation Project: FY2008 Compensation Area Monitoring Report

Description: This document provides a review and status of activities conducted in support of the Fluor Daniel Hanford Company (Fluor) Mitigation Action Plan (MAP) for Project L-325, Electrical Utility Upgrades. It includes time-zero monitoring results for planting activities conducted in January 2008, annual survival monitoring for all planting years (2007 and 2008), and recommendations for the successful completion of DOE habitat mitigation commitments for this project.
Date: September 30, 2008
Creator: Durham, Robin E. & Sackschewsky, Michael R.
Partner: UNT Libraries Government Documents Department
open access

1996 ICF program overview

Description: The continuing objective of the Inertial Confinement Fusion (ICF) Program is the demonstration of thermonuclear fusion ignition and energy gain in the laboratory. The underlying theme of all ICF activities as a science research and development program is the Department of Energy's (DOE's) Defense Programs (DP) science-based Stockpile Stewardship and Management (SSM) Program. The extension of current program research capabilities in the National Ignition Facility (NIF) is necessary for the ICF Program to satisfy its stewardship responsibilities. ICF resources (people and facilities) are increasingly being redirected in support of the performance, schedule, and cost goals of the NIF. One of the more important aspects of ICF research is the national nature of the program. Lawrence Livermore National Laboratory's (LLNL's) ICF Program falls within DOE's national ICF Program, which includes the Nova and Beamlet laser facilities at LLNL and the OMEGA, Nike, and Trident laser facilities at the University of Rochester (Laboratory for Laser Energetics, UR/LLE), the Naval Research Laboratory (NRL), and Los Alamos National Laboratory (LANL), respectively. The Particle Beam Fusion Accelerator (PBFA) and Saturn pulsed-power facilities are at Sandia National Laboratories (SNL). General Atomics, Inc. (GA) develops and provides many of the targets for the above experimental facilities. LLNL's ICF Program supports activities in two major interrelated areas: (1) target physics and technology (experimental, theoretical, and computational research); and (2) laser science and optics technology development. Experiments on LLNL's Nova laser primarily support ignition and weapons physics research. Experiments on LLNL's Beamlet laser support laser science and optics technology development. In addition, ICF sciences and technologies, developed as part of the DP mission goals, continue to support additional DOE objectives. These objectives are (1) to achieve diversity in energy sources through inertial fusion energy (IFE) research and (2) to maintain a competitive US economy through new development of technologies …
Date: September 30, 1996
Creator: Correll, D
Partner: UNT Libraries Government Documents Department
open access

2002 WIPP Environmental Monitoring Plan

Description: DOE Order 5400.1, General Environmental Protection Program, requires each DOE | facility to prepare an environmental management plan (EMP). This document is | prepared for WIPP in accordance with the guidance contained in DOE Order 5400.1; DOE Order 5400.5, Radiation Protection of the Public and Environment; applicable sections of Environmental Regulatory Guide for Radiological Effluent Monitoring and Environmental Surveillance (DOE/EH-0173T; DOE, 1991); and the Title 10 Code of Federal Regulations (CFR) Part 834, ''Radiation Protection of the Public and Environment'' (draft). Many sections of DOE Order 5400.1 have been replaced by DOE Order 231.1, which is the driver for the annual Site Environmental Report (SER) and the guidance source for preparing many environmental program documents. The WIPP Project is operated by Westinghouse TRU Solutions (WTS) for the DOE. This plan defines the extent and scope of WIPP's effluent and environmental | monitoring programs during the facility's operational life and also discusses WIPP's quality assurance/quality control (QA/QC) program as it relates to environmental monitoring. In addition, this plan provides a comprehensive description of environmental activities at WIPP including: A summary of environmental programs, including the status of environmental monitoring activities A description of the WIPP Project and its mission A description of the local environment, including demographics An overview of the methodology used to assess radiological consequences to the public, including brief discussions of potential exposure pathways, routine and accidental releases, and their consequences Responses to the requirements described in the Environmental Regulatory Guide for Radiological Effluent Monitoring and Environmental Surveillance.
Date: September 30, 2002
Creator: Westinghouse TRU Solutions LLC
Partner: UNT Libraries Government Documents Department
open access

2008 River Corridor Closure Contractor Revegetation and Mitigation Monitoring Report

Description: The purpose of this report is to document the status of revegetation projects and natural resources mitigation efforts that have been conducted for remediated waste sites and other activities associated with the Comprehensive Environmental Response, Compensation, and Liability Act cleanup of National Priorities List waste sites at Hanford. This report documents the results of revegetation and mitigation monitoring conducted in 2008 and includes 22 revegetation/restoration projects, one revegetation/mitigation project, and two bat habitat mitigation projects.
Date: September 30, 2008
Creator: Lindsey, C. T. & Gano, K. A.
Partner: UNT Libraries Government Documents Department
open access

2009 DOE-EM LONG-TERM MONITORING TECHNICAL FORUM SUMMARY REPORT

Description: The U. S. Department of Energy's (DOE) Office of Environmental Management (EM) has the responsibility for cleaning up 60 sites in 22 states that were associated with the legacy of the nation's nuclear weapons program and other research and development activities. These sites are unique and many of the technologies needed to successfully disposition the associated wastes have yet to be developed or would require significant re-engineering to be adapted for future EM cleanup efforts. In 2008, the DOE-EM Engineering and Technology Program (EM-22) released the Engineering and Technology Roadmap in response to Congressional direction and the need to focus on longer term activities required for the completion of the aforementioned cleanup program. One of the strategic initiatives included in the Roadmap was to enhance long term performance monitoring as defined by 'Develop and deploy cost effective long-term strategies and technologies to monitor closure sites (including soil, groundwater, and surface water) with multiple contaminants (organics, metals and radionuclides) to verify integrated long-term cleanup performance'. To support this long-term monitoring (LTM) strategic initiative, EM 22 and the Savannah River National Laboratory (SRNL) organized and held an interactive symposia, known as the 2009 DOE-EM Long-Term Monitoring Technical Forum, to define and prioritize LTM improvement strategies and products that could be realized within a 3 to 5 year investment time frame. This near-term focus on fundamental research would then be used as a foundation for development of applied programs to improve the closure and long-term performance of EM's legacy waste sites. The Technical Forum was held in Atlanta, GA on February 11-12, 2009, and attended by 57 professionals with a focus on identifying those areas of opportunity that would most effectively advance the transition of the current practices to a more effective strategy for the LTM paradigm. The meeting format encompassed three break-out …
Date: September 30, 2009
Creator: Mayer, J.
Partner: UNT Libraries Government Documents Department
open access

2009 River Corridor Closure Contractor Revegetation and Mitigation Monitoring Report

Description: This document details the results of revegetation and mitigation monitoring conducted in 2009, including 25 revegetation/restoration projects, one revegetation/mitigation project, and three bat mitigation projects.
Date: September 30, 2009
Creator: Lindsey, C. T.; Gano, K. A. & Teel, R. D.
Partner: UNT Libraries Government Documents Department
open access

2009 Site Environmental Report

Description: Each year, Brookhaven National Laboratory (BNL) prepares an annual Site Environmental Report (SER) in accordance with DOE Order 231.1A, Environment, Safety and Health Reporting of the U.S. Department of Energy. The report is written to inform the public, regulators, employees, and other stakeholders of BNL's environmental performance during the calendar year in review. The SER summarizes environmental data; environmental management performance; compliance with applicable DOE, federal, state, and local regulations; and compliance, restoration, and surveillance monitoring program performance. BNL has prepared annual SERs since 1971 and has documented nearly all of its environmental history since the Laboratory's inception in 1947. The report is available in print and as a downloadable file on the BNL web page at http://www.bnl.gov/ewms/ser/. A summary of the SER is also prepared each year to provide a general overview of the report, and is distributed with a CD of the full report.
Date: September 30, 2010
Creator: Ratel, K.M. & Laboratory, Brookhaven National
Partner: UNT Libraries Government Documents Department
open access

2010 Census: Census Bureau Needs Procedures for Estimating the Response Rate and Selecting for Testing Methods to Increase Response Rate

Description: A letter report issued by the Government Accountability Office with an abstract that begins "The U.S. Census Bureau (Bureau) estimates that it will spend at least $2 billion to enumerate households that did not return census forms during the 2010 Census. Increasing the response rate would reduce the number of households that Bureau field staff must visit. To address concerns about reducing the cost of enumerating these households, GAO (1) analyzed how the Bureau develops, supports, and updates the response rate estimate, and the extent to which the Bureau uses the estimate to inform its 2010 planning efforts; (2) described the methods the Bureau considered for increasing response in 2010 and how it tested these methods; and (3) assessed how the Bureau identifies and selects for testing methods to increase response rate, including considering other surveys' methods. To meet these objectives, GAO analyzed the Bureau's documentation for estimating the response rate and selecting for testing methods to increase response, and interviewed experts from other survey organizations."
Date: September 30, 2008
Creator: United States. Government Accountability Office.
Partner: UNT Libraries Government Documents Department
open access

2010 River Corridor Closure Contractor Revegetation and Mitigation Monitoring Report

Description: This report documents eh status of revegetation projects and natural resources mitigation efforts conducted for remediated waste sites and other activities associated with CERLA cleanup of National Priorities List waste sites at Hanford. This report contains vegetation monitoring data that were collected in the spring and summer of 2010 from the River Corridor Closure Contract’s revegetation and mitigation areas on the Hanford Site.
Date: September 30, 2010
Creator: Lindsey, C. T. & Johnson, A. L.
Partner: UNT Libraries Government Documents Department
open access

3013 DE INNER CONTAINER CLOSURE WELD CORROSION EVALUATION

Description: Destructive evaluation (DE) of 3013 containers is one part of the U. S. Department of Energy Integrated Surveillance Program. During standard DE of 3013 containers, visual examinations for pitting and stress corrosion cracking (SCC) are performed on the accessible surfaces of the outer, inner, and convenience containers, which make up the 3013 container. As a result of 3013 DE additional analysis, the area near the inner container closure weld has been identified as being a region of increased corrosion susceptibility, which may provide a pathway for corrosive gases to the outer container. This area has a higher residual stress, an altered microstructure, and less corrosion resistant weld oxides as a result of the welding process as well as a lower temperature than other areas of the container, which may increase the absorption of moisture on the surface. The deposition of moisture in this stressed region could lead to pitting and stress corrosion cracking. During FY2013, the inner container closure weld area was more closely evaluated on several archived samples from DE containers. These containers included FY09 DE2, FY12 DE4, FY12 DE6 and FY12 DE7 and the Hanford High Moisture Container. The additional examinations included visual observations with a stereomicroscope, scanning electron microscopy along with energy dispersive spectroscopy for chemical analysis, and serial metallography of the sidewall and lid that are part of the inner container closure weld region. Pitting was observed in all the samples taken from the closure weld regions of the examined inner containers. This pitting was generally less 20 μm with most less than 5m. These pits were similar in depth to those observed in the vapor exposed surfaces of teardrops in the shelf life corrosion testing. Cracking was not observed on either the vapor-exposed surfaces of the teardrop coupons or the inner container closure weld region. …
Date: September 30, 2013
Creator: Mickalonis, J.
Partner: UNT Libraries Government Documents Department
open access

Accident Analysis for the NIST Research Reactor Before and After Fuel Conversion

Description: Postulated accidents have been analyzed for the 20 MW D2O-moderated research reactor (NBSR) at the National Institute of Standards and Technology (NIST). The analysis has been carried out for the present core, which contains high enriched uranium (HEU) fuel and for a proposed equilibrium core with low enriched uranium (LEU) fuel. The analyses employ state-of-the-art calculational methods. Three-dimensional Monte Carlo neutron transport calculations were performed with the MCNPX code to determine homogenized fuel compositions in the lower and upper halves of each fuel element and to determine the resulting neutronic properties of the core. The accident analysis employed a model of the primary loop with the RELAP5 code. The model includes the primary pumps, shutdown pumps outlet valves, heat exchanger, fuel elements, and flow channels for both the six inner and twenty-four outer fuel elements. Evaluations were performed for the following accidents: (1) control rod withdrawal startup accident, (2) maximum reactivity insertion accident, (3) loss-of-flow accident resulting from loss of electrical power with an assumption of failure of shutdown cooling pumps, (4) loss-of-flow accident resulting from a primary pump seizure, and (5) loss-of-flow accident resulting from inadvertent throttling of a flow control valve. In addition, natural circulation cooling at low power operation was analyzed. The analysis shows that the conversion will not lead to significant changes in the safety analysis and the calculated minimum critical heat flux ratio and maximum clad temperature assure that there is adequate margin to fuel failure.
Date: September 30, 2012
Creator: Baek, J.; Diamond, D.; Cuadra, A.; Hanson, A. L.; Cheng, L. Y. & Brown, N. R.
Partner: UNT Libraries Government Documents Department
open access

Accounting Firm Consolidation: Selected Large Public Company Views on Audit Fees, Quality, Independence, and Choice

Description: A letter report issued by the General Accounting Office with an abstract that begins "The largest accounting firms, known as the "Big 4," currently audit over 78 percent of U.S. public companies and 99 percent of public company annual sales. To address concerns raised by this concentration and as mandated by the Sarbanes-Oxley Act of 2002, on July 30, 2003, GAO issued a report entitled Public Accounting Firms: Mandated Study on Consolidation and Competition, GAO-03-864. As part of that study, GAO surveyed a random sample of 250 public companies from the Fortune 1000 list; preliminary findings were included in the July report. This supplemental report details more comprehensively the 159 responses we received through August 11, 2003, focusing on (1) the relationship of their company with their auditor of record in terms of satisfaction, tenure relationship, and services provided; (2) the effects of consolidation on audit fees, quality, and independence; and (3) the potential implications of consolidation for competition and auditor choice."
Date: September 30, 2003
Creator: United States. General Accounting Office.
Partner: UNT Libraries Government Documents Department
open access

Acoustic Doppler Current Profiler Surveys of Velocity Downstream of Albeni Falls Dam

Description: The U.S. Army Corps of Engineers (USACE), Seattle District, is studying the potential to locate fish bypass systems at Albeni Falls Dam. The USACE requested Pacific Northwest National Laboratory (PNNL) to survey velocity magnitude and direction in the dam tailrace. The empirical data collected will be used to support future numerical modeling, physical modeling, and evaluation of fish bypass system alternatives. In May 2010, PNNL conducted velocity surveys of the Albeni Falls Dam using a boat-mounted acoustic Doppler current profiler. The surveys were conducted over three days (May 25 through 27). During the survey period, total river discharge at the dam varied between 30.2 and 31.0 kcfs. A small amount of spill discharge, 2 kcfs, was present on two days (May 26 and 27). This report presents data plots showing measured velocity direction and magnitude averaged over the entire depth and over 5-ft depth increments from 5 to 30 ft.
Date: September 30, 2010
Creator: Perkins, William A.; Titzler, P. Scott; Richmond, Marshall C.; Serkowski, John A.; Kallio, Sara E. & Bellgraph, Brian J.
Partner: UNT Libraries Government Documents Department
open access

ACTINIDE-SPECIFIC INTERFACIAL CHEMISTRY OF MONOLAYER COATED MESOPOROUS CERAMICS

Description: The objective of this program was to design, synthesize, and evaluate high-efficiency, high-capacity sorbent materials capable of selectively sequestering actinides and other radionuclides from complex aqueous mixtures. One of the central goals of this project was to understand the fundamental interfacial science required to develop novel mesoporous materials coated with organized monolayers of rationally designed ligands, custom-tailored for binding specific actinide cations. This capability addresses waste management by separation of actinides, a central concern of high-level waste (HLW) management at several DOE sites.
Date: September 30, 2001
Creator: Fryxell, Glen E.
Partner: UNT Libraries Government Documents Department
open access

Active Cathodes for Super-High Power Density Solid Oxide Fuel Cells Through Space Charge Effects, 2006, April 10

Description: This report briefly summarizes the work done over the duration of the project, beginning October 1, 2003 and ending September 30, 2005. This project was on understanding cathode mechanisms in intermediate temperature solid oxide fuel cells (SOFC) and developing superior cathodes.
Date: September 30, 2005
Creator: Virkar, Anil V.
Partner: UNT Libraries Government Documents Department
open access

Adsorption and Ultrasound-Assisted Sorbent Regeneration

Description: This work was conducted for the department of Energy. In this work, we developed a class of new sorbents that were highly sulfur selective and had high sulfur capacities. The study consisted of two sections. Development of the new sorbents is described in Section 1, and Section was a fundamental study, conducted for a better understanding for desulfurization of jet fuels. More details of the results are given blow separately for the two sections.
Date: September 30, 2006
Creator: Wang, Yuhe; Ma, Liping & Yang, Ralph T.
Partner: UNT Libraries Government Documents Department
open access

Adsorption of Carbon Tetrachloride to Sediments from the UP-1 Operable Unit

Description: In 2004, Fluor Hanford, Inc. (FHI) drilled several groundwater wells within the 200-UP-1 operable unit to monitor plumes that have been the focus of past remediation activities. Thirteen cores taken from three wells (C4298, C4299, and C4300) were sent to Pacific Northwest National Laboratory for characterization and quantification of contaminant retardation. These cores were 4-inches in diameter by 6-inches in length and were taken from depths near the unconfined aquifer surface (water table) to locations approximately 150 to 180 ft below the water table. Prior to this work, no 200-UP-1 site-specific adsorption data (i.e., values of distribution coefficient [Kd ]) were available for the sediments or key contaminants present in the 200-UP-1 operable unit groundwater plume. Site-specific sorption data for carbon tetrachloride (CCl4) was obtained with the <2 mm size fractions of uncontaminated 200-UP-1 sediments taken from two of these boreholes (C4299 and C4300) and distribution coefficients determined. Each fraction exhibited bimodal CCl4 adsorption isotherms over the concentration range (15 – 2500 g L-1) for total CCl4 in solution. Sorption of CCl4 was linear over the concentration ranges of 15 to 400 g L-1 and 400 to 2500 g L-1. The Kd values measured for the three 200-UP-1 sediments exhibited bimodal sorption with initial Kd values ranging from 0.0002 to 0.0005, and phase 2 values approximately 0.003 for all sediments. The measure Kd values are lower than the range calculated for CCl4 in a Hanford soil (0.016 to 0.83 L/Kg) containing an average organic carbon content of 0.2% (Truex et al., 2001). The best estimate value of Truex et al. (2001) is 0.06 L/Kg based on a 0.1% sediment organic carbon content. However, this estimate is based on an organic carbon content up to an order of magnitude greater than the organic carbon content of the sediments tested herein. Prolonged …
Date: September 30, 2006
Creator: Wellman, Dawn M.; Riley, Robert G.; Parker, Kent E. & Mitroshkov, Alexandre V.
Partner: UNT Libraries Government Documents Department
open access

Advanced Battery Manufacturing (VA)

Description: LiFeBATT has concentrated its recent testing and evaluation on the safety of its batteries. There appears to be a good margin of safety with respect to overheating of the cells and the cases being utilized for the batteries are specifically designed to dissipate any heat built up during charging. This aspect of LiFeBATT’s products will be even more fully investigated, and assuming ongoing positive results, it will become a major component of marketing efforts for the batteries. LiFeBATT has continued to receive prismatic 20 Amp hour cells from Taiwan. Further testing continues to indicate significant advantages over the previously available 15 Ah cells. Battery packs are being assembled with battery management systems in the Danville facility. Comprehensive tests are underway at Sandia National Laboratory to provide further documentation of the advantages of these 20 Ah cells. The company is pursuing its work with Hybrid Vehicles of Danville to critically evaluate the 20 Ah cells in a hybrid, armored vehicle being developed for military and security applications. Results have been even more encouraging than they were initially. LiFeBATT is expanding its work with several OEM customers to build a worldwide distribution network. These customers include a major automotive consulting group in the U.K., an Australian maker of luxury off-road campers, and a number of makers of E-bikes and scooters. LiFeBATT continues to explore the possibility of working with nations that are woefully short of infrastructure. Negotiations are underway with Siemens to jointly develop a system for using photovoltaic generation and battery storage to supply electricity to communities that are not currently served adequately. The IDA has continued to monitor the progress of LiFeBATT’s work to ensure that all funds are being expended wisely and that matching funds will be generated as promised. The company has also remained current on all obligations …
Date: September 30, 2012
Creator: Stratton, Jeremy
Partner: UNT Libraries Government Documents Department
Back to Top of Screen