Search Results

A 1.8 Mev K+ injector for the high current beam transport experiment fusion

Description: For the High Current Beam Transport Experiment (HCX) at LBNL, an injector is required to deliver up to 1.8 MV of 0.6 A K{sup +} beam with an emittance of {approx}1 p-mm-mrad. We have successfully operated a 10-cm diameter surface ionization source together with an electrostatic quadrupole (ESQ) accelerator to meet these requirements. The pulse length is {approx}4 {micro}s, firing at once every 10-15 seconds. By optimizing the extraction diode and the ESQ voltages, we have obtained an output beam with good current density uniformity, except for a small increase near the beam edge. Characterization of the beam emerging from the injector included measurements of the intensity profile, beam imaging, and transverse phase space. These data along with comparison to computer simulations provide the knowledge base for designing and understanding future HCX experiments.
Date: May 20, 2002
Creator: Kwan, J. W.; Bieniosek, F. M.; Henestroza, E.; Prost, L. & Seidl, P.
Partner: UNT Libraries Government Documents Department

1 GeV CW nonscaling FFAG for ADS, and magnet parameters

Description: Multi-MW proton driver capability remains a challenging, critical technology for many core HEP programs, particularly the neutrino ones such as the Muon Collider and Neutrino factory, and for high-profile energy applications such as Accelerator Driven Subcritical Reactors (ADS) and Accelerator Transmutation of Waste for nuclear power and waste management. Work is focused almost exclusively on an SRF linac, as, to date, no re-circulating accelerator can attain the 10-20 MW capability necessary for the nuclear applications. Recently, the concept of isochronous orbits has been explored and developed for nonscaling FFAGs using powerful new methodologies in FFAG accelerator design. Work is progressing on a stable, high-intensity, 1 GeV isochronous FFAG. Initial specifications of novel magnets with the nonlinear radial fields required to support isochronous operation are also reported here.
Date: May 20, 2012
Creator: Johnstone, C.; Meot, F.; Snopok, P. & Weng, W.
Partner: UNT Libraries Government Documents Department

(02.2) Scoping experiments; (02.3) long-term corrosion testing and properties evaluation of candidate waste package basket material

Description: The work described in this activity plan addresses Information Need 2.7.3 of the Yucca Mountain Site Characterization Plan (l), which reads Determination that the design criteria in lOCFR60.130 through 60.133 and any appropriate additional design objectives pertaining to criticality control have been met. This work falls under section WBS 2 (Basket Materials) of WBS (Waste Package Materials) in the Work Breakdown Structure of the Yucca Mountain Site Characterization Project.
Date: December 20, 1996
Creator: VanKonynenburg, R. A.
Partner: UNT Libraries Government Documents Department

2-D Axisymmetric Line Transport

Description: The methods used in the ALTAIR code for computing the transfer of spectral line radiation in two-dimensional axially-symmetric geometry are described. ALTAIR uses a variable-Eddington-tensor approach, in which the transfer equation of non-coherent line scattering is written in moment form, and the moments are closed with an assumed tensor relating the monochromatic pressure tensor and energy density; this Eddington tensor is obtained self-consistently using an accurate angle-dependent solution of the transfer equation. The finite element method for solving the moment system, and the discontinuous finite element method for solving the S{sub n} equation of transfer are described. Two applications of the method are discussed: line formation in uniform cylinders with different length-diameter ratios, and monochromatic transfer on an irregular x-y mesh (the Mordant test problem). 13 refs., 2 figs.
Date: November 20, 1990
Creator: Castor, John I.; Dykema, Pieter G & Klein, Richard I.
Partner: UNT Libraries Government Documents Department

A 2-D Pore-Network Model of the Drying of Single-Component Liquids in Porous Media

Description: The drying of liquid-saturated porous media is typically approaching using macroscopic continuum models involving phenomenological coefficients. Insight on these coefficients can be obtained by a more fundamental study at the pore- and pore-network levels. In this report, a model based on pore-network representation of porous media that accounts for various process at the pore-scale is presented. These include mass transfer by advection and diffusion in the gas phase, viscous flow in liquid and gas phases and capillary effects at the gas-liquid menisci in the pore throats.
Date: January 20, 2000
Creator: Yortsos, Yanic C.; Yiotis, A. G.; Stubos, A. K. & Boundovis, A. G.
Partner: UNT Libraries Government Documents Department

2, Pulse-mode expansions and refractive indices in plane-wave propagation

Description: This memo presents basic background theory for treating simultaneous propagation of electromagnetic pulses of various colors, directed along a common ray, through a molecular vapor. The memo discusses some techniques for expanding the positive frequency part of the transverse electric field into pulse modes, characterized by carrier frequencies within a modulated envelope. We discuss, in the approximation of plane waves with slowly varying envelopes, a set of uncoupled envelope equations in which a polarization mode-envelope acts as a source for an electric-field envelope. These equations, when taken with a prescription for the polarization field, are the basic equations of plane-wave pulse propagation through a molecular medium. We discuss two ways of treating dispersive media, one based upon expansions in the frequency domain and the other based in the time domain. In both cases we find envelope equations that involve group velocities. This memo represents a portion of a more extensive treatment of propagation to be presented separately. Many of the equations presented here have been described in various books and articles. They are collected and described here as a summary and review of contemporary theory.
Date: June 20, 1987
Creator: Shore, B.W.; Sacks, R.; Karr, T.; Morris, J. & Paisner, J.A.
Partner: UNT Libraries Government Documents Department

2$sup 0$K vacuum pumping system for Baseball II

Description: A vacuum pumping system that provides a cryo surface for condensing and freezing of H/sub 2/ gas is described. A closed-loop vacuum system was designed and built at Lawrence Livermore Laboratory to pump down the neutralizer LH/sub e/ dewar with a volurae of 350 l and the lambda point dewar with a LH/sub e/ volume of 250 l. Both of these dewars can be pumped down simultaneously or one at a time. 100% of the H/sub e/ gas is recovered free of contaminations. The vacuum pump can handle 340 SCFM of gas. The LH/sub e/ dewars are pumped down below the lambda point. This condition reduces the LH/sub e/ container wall temperature to 2.1 deg K giving a base pressure of 10/sup -13/ torr for H/sub 2/ gas/sup 2/. To attain a stable condition the LH /sub e/ baths are puuped down to 33 torr or lower to give a surface temperatare of about 2/sup 0/K/sup 3/. The Baseball II helium factlity is a close loop system. The H/sub e/ gas is recovered from all the LH/sub e/ usage point. This gas is accumulated in one of the two 8000 cu ft inflatable gas bags. The gas from the gas bags is compressed into storage tanks at 1800 psig. The gas is purified to 99.99999% and it is liquified at a rate of 100 liquid liters per hour. (auth)
Date: August 20, 1973
Creator: Denhoy, B.S.
Partner: UNT Libraries Government Documents Department

3-D computer simulations of EM field sin the APS vacuum chamber. Part 2: Time-domain analysis

Description: Our simulations suggest that the strong peak around 4 GHz in the narrow gap observed in the measurements is generated by TE modes. Therefore, one should not worry about this peak insofar as the coupling impedance is concerned. On the other hand, some discrepancies between our simulations and the measurements are noticed and remain to be resolved.
Date: January 20, 1989
Creator: Chou, W.
Partner: UNT Libraries Government Documents Department

3-D Finite Element Analysis of Induction Logging in a Dipping Formation

Description: Electromagnetic induction by a magnetic dipole located above a dipping interface is of relevance to the petroleum well-logging industry. The problem is fully three-dimensional (3-D) when formulated as above, but reduces to an analytically tractable one-dimensional (1-D) problem when cast as a small tilted coil above a horizontal interface. The two problems are related by a simple coordinate rotation. An examination of the induced eddy currents and the electric charge accumulation at the interface help to explain the inductive and polarization effects commonly observed in induction logs from dipping geological formations. The equivalence between the 1-D and 3-D formulations of the problem enables the validation of a previously published finite element solver for 3-D controlled-source electromagnetic induction.
Date: July 20, 2000
Creator: Everett, Mark E.; Badea, Eugene A,; Shen, Liang, C.; Merchant, Gulamabbas A. & Weiss, Chester J.
Partner: UNT Libraries Government Documents Department

3-D TECATE/BREW: Thermal, stress, and birefringent ray-tracing codes for solid-state laser design

Description: This report describes the physics, code formulations, and numerics that are used in the TECATE (totally Eulerian code for anisotropic thermo-elasticity) and BREW (birefringent ray-tracing of electromagnetic waves) codes for laser design. These codes resolve thermal, stress, and birefringent optical effects in 3-D stationary solid-state systems. This suite of three constituent codes is a package referred to as LASRPAK.
Date: July 20, 1994
Creator: Gelinas, R. J.; Doss, S. K. & Nelson, R. G.
Partner: UNT Libraries Government Documents Department

[3 Levels of Interactions presentation at APAEC 2011]

Description: Photograph of a presentation "3 Levels of Interactions" at APAEC 2011, held by UNT Special Collections. The image shows a room filled with people sitting down, a presenter can be seen at the front of the room near the top right. On the top left a projector screen can be seen, with it containing a chart titled "3 Levels of Interactions" with two columns following it. APAEC stands for Asian Pacific American Empowerment Conference, an annual conference that happens every year at UNT.
Date: April 20, 2011
Partner: UNT Libraries Special Collections

9/11 Commission Recommendations: Joint Committee on Atomic Energy - A Model for Congressional Oversight?

Description: This report focuses on that portion of the 9/11 Commission recommendation that urges Congress to consider the model of the Joint Committee on Atomic Energy (JCAE). It provides an outline of the history, structure, and powers of the JCAE and analyzes a number of issues that might be considered by policymakers as they weigh the suitability of the JCAE as a possible model when crafting congressional oversight mechanisms for intelligence.
Date: August 20, 2004
Creator: Davis, Christopher M.
Partner: UNT Libraries Government Documents Department

100 Area and 300 Area Component of the River Corridor Baseline Risk Assessment Spring 2006 Data Compilation

Description: The purpose of this report is to describe the sampling approaches, modifications made to the 100 Area and 300 Area component of the RCBRA Sampling and Analysis Plan, summarize validation efforts, and provide sample identification numbers.
Date: November 20, 2006
Creator: Queen, J. M. & Weiss, S. G.
Partner: UNT Libraries Government Documents Department

100-C water plant

Description: System curves for each portion of the C Area Water Plant were obtained from referenced work and are presented in figures. Field test data, corroborating the calculated curves, are presented as singular points on the same graphs. Present maxima capacity of the C Area Filter Plant was 121,000 gpm with 118,000 gpm available for use as primary reactor coolant. Modifications to the filter effluent piping would increase this available flow to about 180,000 gpm. Of the 118,000 gpm available for C Reactor use, 10,000 to 12,000 gpm was demanded by B Area through the 183 BC intertie. The maximum flow that the intertie line could handle, without reducing the filter capacity of the C Area filters, is about 21,000 gpm.
Date: February 20, 1961
Creator: Agar, J. D.
Partner: UNT Libraries Government Documents Department

100-D Area technical baseline report

Description: This document is prepared in support of the 100 Area Environmental Restoration activity at the US Department of Energy`s Hanford Site near Richland, Washington. It provides a technical baseline of waste sites located at the 100-D Area. The report is based on an environmental investigation undertaken by the Westinghouse Hanford Company (WHC) History Office in support of the Environmental Restoration Engineering Function and on review and evaluation of numerous Hanford Site current and historical reports, drawings, and photographs, supplemented by site inspections and employee interviews. No intrusive field investigation or sampling was conducted. All Hanford coordinate locations are approximate locations taken from several different maps and drawings of the 100-D Area. Every effort was made to derive coordinate locations for the center of each facility or waste site, except where noted, using standard measuring devices. Units of measure are shown as they appear in reference documents. The 100-D Area is made up of three operable units: 100-DR-1, 100-DR-2, and 100-DR-3. All three are addressed in this report. These operable units include liquid and solid waste disposal sites in the vicinity of, and related to, the 100-D and 100-DR Reactors. A fourth operable unit, 100-HR-3, is concerned with groundwater and is not addressed here. This report describes waste sites which include cribs, trenches, pits, french drains, retention basins, solid waste burial grounds, septic tanks, and drain fields. Each waste site is described separately and photographs are provided where available. A complete list of photographs can be found in Appendix A. A comprehensive environmental summary is not provided here but may be found in Hanford Site National Environmental Policy Act Characterization (Cushing 1988), which describes the geology and soils, meteorology, hydrology, land use, population, and air quality of the area.
Date: August 20, 1993
Creator: Carpenter, R. W.
Partner: UNT Libraries Government Documents Department

200 amp Neutral Beam Source

Description: Recent efforts in controlled fusion experiments have indicated the need for large neutral-beam sources to provide an initial plasma for further plasma buildup, for use as a stoking source to makeup losses, or for plasma heating. Experiments now operating or envisioned for the near future anticipate the need for kilo-amp neutral beams in the 20-keV energy range and higher. These sources will be required to focus into relatively small-volume targets, have good gas efficiency, and use a minimum of excess gas for downstream neutralization. A test facility with sufficient pumping capacity to handle sources of this size is described. The ion source, mockup extraction grid, and the requisite electronic and power equipment for a 200-amp neutral-deuterium beam are discussed. The beam pulse length will be from 2 to 10 msec. (auth)
Date: August 20, 1973
Creator: Duffy, Thomas J.
Partner: UNT Libraries Government Documents Department

241-AY-102 Leak Detection Pit Drain Line Inspection Report

Description: This document provides a description of the design components, operational approach, and results from the Tank AY-102 leak detection pit drain piping visual inspection. To perform this inspection a custom robotic crawler with a deployment device was designed, built, and operated by IHI Southwest Technologies, Inc. for WRPS to inspect the 6-inch leak detection pit drain line.
Date: January 20, 2014
Creator: Boomer, Kayle D.; Engeman, Jason K.; Gunter, Jason R.; Joslyn, Cameron C.; Vazquez, Brandon J.; Venetz, Theodore J. et al.
Partner: UNT Libraries Government Documents Department