361 Matching Results

Search Results

Results: 1 - 24 next
open access

630A Maritime Nuclear Steam Generator Scoping Study

Description: From foreword: This report presents the results of a study of a nuclear steam generator which uses reactor technology during the aircraft nuclear propulsion program to produce superheated steam for marine propulsion.
Date: April 6, 1962
Creator: General Electric Company. Flight Propulsion Division.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Acceleration Measurements During Landing in Rough Water of a 1/7-Scale Dynamic Model of Grumman XJR2F-1 Amphibian - Langley Tank Model 212: TED No. NACA 2378

Description: From Summary: "Tests of a 1/7 size model of the Grumman XJR2F-1 amphibian were made in Langley tank no.1 to examine the landing behavior in rough water and to measure the normal and angular accelerations experienced by the model during these landings. All landings were made normal to the direction of wave advance, a condition assumed to produce the greatest accelerations. Wave heights of 4.4 and 8.0 inches (2.5 and 4.7 ft, full size) were used in the tests and the wave lengths were varied betwe… more
Date: May 6, 1947
Creator: Land, Norman S. & Zeck, Howard
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Acceleration of a Plasma by Time-Varying Magnetic Fields

Description: Abstract: An application of the magnetic mirror principle to the acceleration of a plasma is described. It is shown that an axially symmetric magnetic field which increases with time but decreases with distance along the axis can impart a net translational energy to a plasma. This effect on a plasma is contrasted with that arising from an impressed electric field, which is not effective in producing acceleration.
Date: December 6, 1954
Creator: Post, Richard F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Acid-Base Equilibria in Tertiary Butyl Alcohol

Description: From abstract: "The dissociation of acids in tertiary butyl alcohol has been studied by potentiometric, spectrophotometric, and conductimetric methods. Values for the over-all dissociation of perchloric and picric acids and several tetrabutylammonium salts were estimated by the Fuoss-Kraus treatment of conductance data. Potentiometric studies were carried out at constant ionic strength in order to minimize activity coefficient variations. An acidity scale was established from potentiometric mea… more
Date: August 6, 1962
Creator: Marple, Leland & Fritz, James S. (James Sherwood), 1924-
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Additional Studies of the Stability and Controllability of an Unswept-Wing Vertically Rising Airplane Model in Hovering Flight Including Studies of Various Tethered Landing Techniques

Description: Report discussing the results of an investigation to determine the stability and control characteristics of a flying model of an unswept-wing vertically rising airplane. Information about stabilization, maneuverability, rolling motions, and landings is provided.
Date: November 6, 1951
Creator: Bates, William R.; Lovell, Powell M., Jr. & Smith, Charles C., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics at high speeds of related full-scale propellers having different blade-section cambers

Description: From Summary: "Wind-tunnel tests of a full-scale two-blade NACA 10-(10)(08)-03 (high camber) propeller have been made for a range of blade angles from 20 degrees to 55 degrees at airspeeds up to 500 miles per hour. The results of these tests have been compared with results from previous tests of the NACA 10-(3) (08)-03 (low camber) and NACA 10-(5)(08)-03 (medium camber) propellers to evaluate the effects of blade-section camber on propeller aerodynamic characteristics."
Date: May 6, 1948
Creator: Maynard, Julian D. & Salters, Leland B., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics at subcritical and supercritical Mach numbers of two airfoil sections having sharp leading edges and extreme rearward positions of maximum thickness

Description: From Introduction: "A 12-percent-chord-thick wedge section and a reversed NACA 0012 section were chosen for these tests as they are representative of sections having no boat tailing and appreciable boat tailing (i.e., blunt and rounded trailing edges, respectively), and the results of this investigation are compared with those obtained from a previous investigation of the NACA 0012 section. Conclusions are drawn regarding the relative merits of the two unconventional sections and the convention… more
Date: November 6, 1947
Creator: Eggers, A. J., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics at transonic speeds of a 69 degree delta wing with a triangular plan-form control having a skewed hinge axis and an overhang balance: transonic-bump method

Description: From Introduction: "Presented in this paper are the results of an investigation of a semispan model of a delta wing with 60^o sweepback at the leading edge which was equipped with a large triangular control having an overhang balance mounted on a skewed hinge axis. The purpose of this investigation was to determine the aerodynamic characteristics of a delta wing with a control which was designed to provide aerodynamic balance at zero control deflection based on the span load distribution of ref… more
Date: February 6, 1951
Creator: Wiley, Harleth G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics including pressure distribution of a fuselage and three combinations of the fuselage with swept-back wings at high subsonic speeds

Description: From Introduction: "The wings were tested in combination with fuselage similar to the one used in the 7- by 10-foot wind-tunnel investigations. The results are reported herein and are compared with results for three similar model wings on the transonic bump (references 1, 2, and 3)."
Date: February 6, 1951
Creator: Sutton, Fred B. & Martin, Andrew
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of a Portion of the Horizontal Tail from a Douglas C-74 Airplane with Fabric-Covered Elevators

Description: "A Douglas C-74 airplane, during a test dive at about 0.525 Mach number, experienced uncontrollable longitudinal oscillations sufficient to cause shedding of the outer wing panels and the subsequent crash of the airplane. Tests of a section of the horizontal tail plane from a C-74 airplane were conducted in the Ames 16-foot high-speed wind tunnel to investigate the possibility of the tail as a contributing factor to the accident. The results of the investigations of fabric-covered elevators in … more
Date: May 6, 1947
Creator: Perone, Angelo & Berthold, Cecil L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics of a wing with quarter-chord line swept back 60 degrees, aspect ratio 4, taper ratio 0.6, and NACA 65A006 airfoil section: transonic-bump method

Description: From Introduction: "This paper presents the results of the investigation of the wing-alone and wing-fuelage configurations employing a wing with the quarter-chord line swept back 60^o, aspect ratio 4, taper ratio 0.6, and an NACA 65A006 airfoil section parallel to the free stream."
Date: September 6, 1949
Creator: King, Thomas J., Jr. & Myers, Boyd C., II
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of Four Wings of Sweepback Angles 0 Degrees, 35 Degrees, 45 Degrees, and 60 Degrees, NACA 65A006 Airfoil Section, Aspect Ratio 4, and Taper Ratio 0.6 in Combination With a Fuselage at High Subsonic Mach Numbers and at a Mach Number of 1.2

Description: Report discussing an investigation of the effect of sweepback angle on wing-fuselage characteristics at a subsonic and a supersonic Mach number. Lift, drag, and pitching-moment coefficients, downwash-angle, and total-pressure measurements are all provided.
Date: June 6, 1951
Creator: Luoma, Arvo A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic heating of a thin, unswept, untapered, multiweb, aluminum-alloy wing at Mach numbers up to 2.67 as determined from a free-flight investigation of a rocket-propelled model

Description: From Introduction: "The heat-transfer data calculated from measured temperatures are compared with values calculated by the theory of Van Driest for a flat plate with laminar and turbulent boundary layers. In addition, the heat-transfer data from the flight tests are compared with data obtained from the Langley Structures Research Division of ground tests of an identical wing at a Mach number approximately equal to 1.99 in the pre-flight jet of the Langley Pilotless Aircraft Research Station a… more
Date: August 6, 1957
Creator: Strass, H. Kurt & Stephens, Emily W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic study of a wing-fuselage combination employing a wing swept back 63 degrees: Investigation at a Mach number of 1.53 to determine the effects of cambering and twisting the wing for uniform load at a lift coefficient of 0.25

Description: Testing was performed at Mach number 1.53 with a wing-fuselage combination with a wing with 63 degrees leading-edge sweep, an aspect ratio of 3.46, and a taper ratio of 0.25. The wing had an NACA 64A005 thickness distribution parallel to the plane of symmetry and was cambered and twisted. Results regarding the comparison of lift, drag, and pitching-moment characteristics of WF-63c and WF-63, effects of sweep, and effects of Reynolds number are provided.
Date: May 6, 1949
Creator: Madden, Robert T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamics of slender bodies at Mach number of 3.12 and Reynolds numbers from 2 x 10(exp 6) to 15 x 10(exp 6) 3: boundary layer and force measurements on a slender cone-cylinder body of revolution

Description: Report presenting an experimental investigation to determine the aerodynamic characteristics of a slender cone-cylinder body of revolution in the 1- by 1-foot supersonic wind tunnel. Viscous drag and three component forces were measured at Mach number 3.12 and a range of Reynolds numbers and angles of attack. Results regarding pressure distributions, boundary layer, and forces are provided.
Date: April 6, 1953
Creator: Jack, John R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamics of slender bodies at Mach number of 3.12 and Reynolds numbers from 2 x 10(exp 6) to 15 x 10(exp 6) 5: aerodynamic load distributions for a series of four boattailed bodies

Description: Pressure distributions for a series of four boattailed bodies of revolution were obtained and compared with theory for a Mach number of 3.12, a Reynolds number range of 2 x 10 to 6th power to 14 x 10 to the 6th power, and angles of attack from zero to 9 degrees. Second-order theory adequately predicted the pressure distribution for regions free of the effects of cross-flow separation.
Date: May 6, 1954
Creator: Moskowitz, Barry & Jack, John R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Air-flow and thrust characteristics of several cylindrical cooling-air ejectors with a primary to secondary temperature ratio of 1.0

Description: Report presenting an investigation to determine the performance of 17 cooling-air ejectors at primary-jet pressure ratios from 1 to 10, secondary pressure ratios to 4.0, and a temperature ratio of unity. Results regarding pumping characteristics, effect of spacing ratio on pumping, effect of diameter ratio on pumping, thrust characteristics, effect of spacing ratio on thrust, effect of diameter ratio on thrust, comparison of cylindrical and conical ejectors, comparison of performance with small… more
Date: March 6, 1953
Creator: Greathouse, W. K. & Hollister, D. P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Air Flow in the Boundary Layer of an Elliptic Cylinder

Description: From Introduction: "The present investigation was carried out for the purpose of supplementing the earlier work with information on the boundary layer under such conditions of air speed and turbulence that transition occurs and the layer is partly laminar and partly turbulent. In the work reported in reference 1, the air speed was about 12 feet per second, and it was assumed that the boundary layer remained in the laminar condition until after separation because the separation point remained fi… more
Date: August 6, 1938
Creator: Schubauer, G. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Air-Gun Studies of Ferroelectric Materials (Second Printing)

Description: Specimens of two ferroelectric materials, barium titanate and lead-zirconate titanate, have been subjected to high dynamic stresses by impacting them with a projectile accelerated by an air gun. The purpose of these tests was to supplement information previously obtained using high explosives to stress the ferromagnetic materials.
Date: February 6, 1958
Creator: Ripperger, E. A. & Beck, A. F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department

Airborne radioactivity survey of the Miller Hill area, Carbon County, Wyoming

Description: Aerial image shows the result of an airborne radioactive survey over an area of 65 square miles in the vicinity of Miller Hill, Carbon County, Wyoming with the approximate location of eleven radioactivity anomalies found. Text describes methods used and discusses the anomalies.
Date: March 6, 1991
Creator: Meuschke, J. L. & Moxham, Robert Morgan
Item Type: Refine your search to only Map
Partner: UNT Libraries Government Documents Department
open access

Aircraft Nuclear Propulsion Project Quarterly Progress Report: Period Ending December 10, 1951

Description: This quarterly progress report details the ongoing research and experiments at the Oak Ridge National Laboratory as part of the Aircraft Nuclear Propulsion Project. The first part of this report discusses reactor theory and design. The second part of this report is not included. The third part of this report discusses materials research. The fourth part of this report includes appendixes
Date: March 6, 1952
Creator: Briant, R. C. & Cottrell, W. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Altitude Investigation of Gas Temperature Distribution at Turbine of Three Similar Axial-Flow Turbojet Engines

Description: An investigation of the effect of inlet pressure, corrected engine speed, and turbine temperature level on turbine-inlet gas temperature distributions was conducted on a J40-WE-6, interim J40-WE-6, and prototype J40-WE-8 turbojet engine in the altitude wind tunnel at the NACA Lewis laboratory. The engines were investigated over a range of simulated pressure altitudes from 15,000 to 55,000 feet, flight Mach numbers from 0.12 to 0.64, and corrected engine speeds from 7198 to 8026 rpm.
Date: August 6, 1952
Creator: Prince, W. R. & Schulze, F. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Altitude performance investigation of two flame-holder and fuel-system configurations in short afterburner

Description: From Introduction: "The results of this complete evaluation of the altitude performance and operational characteristics of the two types of flame-holder and fuel-system configurations are reported herein.The starting limits of both configurations at a flight Mach number of 0.6 are also discussed."
Date: May 6, 1952
Creator: Huntley, S. C. & Wilsted, H. D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen