14 Matching Results

Search Results

Results: 1 - 14
open access

General Potential Theory of Arbitrary Wing Sections

Description: The problem of determining the two dimensional potential flow around wing sections of any shape is examined. The problem is condensed into the compact form of an integral equation capable of yielding numerical solutions by a direct process. An attempt is made to analyze and coordinate the results of earlier studies relating to properties of wing sections. The existing approximate theory of thin wing sections and the Joukowski theory with its numerous generalizations are reduced to special cases… more
Date: November 4, 1932
Creator: Theodorsen, T. & Garrick, I. E.
Partner: UNT Libraries Government Documents Department
open access

Tank Tests of the Effect of Rivet Heads, etc., on the Water Performance of a Seaplane Float, Special Report

Description: "A 1/3.5 full-size model of the Mark V float of the Bureau of Aeronautics, Navy Department, was tested in the NACA tank both with smooth painted bottom surfaces and with roundhead rivets, plate laps, and keel plates fitted to simulate the actual bottom of a metal float. The augmentation in water resistance due to the added roughness was found to be from 10-12% at the hum speed and from 12-14% at high speeds. The effect of the roughness of the afterbody was found to be negligible except at high … more
Date: June 4, 1936
Creator: Parkinson, J. B. & Robertson, J. B., Jr.
Partner: UNT Libraries Government Documents Department
open access

Experimental Investigation of Wind-Tunnel Interference on the Downwash Behind an Airfoil

Description: "The interference of the wind-tunnel boundaries on the downwash behind an airfoil has been experimentally investigated and the results have been compared with the available theoretical results for open-throat wind tunnels. As in previous studies, the simplified theoretical treatment that assumes the test section to be an infinite free jet has been shown to be satisfactory at the lifting line. The experimental results, however, show that this assumption may lead to erroneous conclusions regardin… more
Date: June 4, 1937
Creator: Silverstein, Abe & Katzoff, S.
Partner: UNT Libraries Government Documents Department
open access

Characteristics of six propellers including the high-speed range

Description: This investigation is part of an extensive experimental study that has been carried out at full scale in the NACA 20-foot tunnel, the purpose of which has been to furnish information in regard to the functioning of the propeller-cowling-nacelle unit under all conditions of take-off, climbing, and normal flight. This report presents the results of tests of six propellers in the normal and high-speed flight range and also includes a study of the take-off characteristics.
Date: June 4, 1936
Creator: Theodorsen, Theodore; Stickle, George W. & Brevoort, M. J.
Partner: UNT Libraries Government Documents Department
open access

Pressure-distribution measurements at large angles of pitch on fins of different span-chord ratio on a 1/40-scale model of the U. S. Airship "Akron"

Description: Report presents the results of pressure-distribution measurements on a 1/40-scale model of the U. S. Airship "Akron" conducted in the NACA 20-foot wind tunnel. The measurements were made on the starboard fin of each of four sets of horizontal tail surfaces, all of approximately the same area but differing in span-chord ratio, for five angles of pitch varying from 11.6 degrees to 34 degrees, for four elevator angles, and at air speeds ranging from 56 to 77 miles per hour. Pressures were also mea… more
Date: April 4, 1937
Creator: McHugh, James G.
Partner: UNT Libraries Government Documents Department
open access

Propulsion of a flapping and oscillating airfoil

Description: Formulas are given for the propelling or drag force experience in a uniform air stream by an airfoil or an airfoil-aileron combination, oscillating in any of three degrees of freedom; vertical flapping, torsional oscillations about a fixed axis parallel to the span, and angular oscillations of the aileron about a hinge.
Date: May 4, 1936
Creator: Garrick, I. E.
Partner: UNT Libraries Government Documents Department
open access

Cooling characteristics of a 2-row radial engine

Description: This report presents the results of cooling tests conducted on a calibrated GR-1535 Pratt and Whitney Wasp, Jr. Engine installed in a Vought X04U-2 airplane. The tests were made in the NACA full-scale tunnel at air speeds from 70 to 120 miles per hour, at engine speeds from 1,500 to 2,600 r.p.m., and at manifold pressures from 19 to 33 inches of mercury absolute. A Smith controllable propeller was used to facilitate obtaining the different combinations of engine speed, power, and manifold press… more
Date: December 4, 1934
Creator: Schey, Oscar W. & Rollin, Vern G.
Partner: UNT Libraries Government Documents Department
open access

Turbulence factors of NACA wind tunnels as determined by sphere tests

Description: Report presents the results of drag and pressure tests of spheres having diameters of 2, 4, 6, 8, 10, and 12 inches in eight NACA wind tunnels, in the air ahead of the carriage in the NACA tank, and beneath an autogiro in flight .
Date: February 4, 1936
Creator: Platt, Robert C.
Partner: UNT Libraries Government Documents Department
open access

A comparison of fuel sprays from several types of injection nozzles

Description: This report presents the tests results of a series of tests made of the sprays from 14 fuel injection nozzles of 9 different types, the sprays being injected into air at atmospheric density and at 6 and 14 times atmospheric density. High-speed spark photographs of the sprays from each nozzle at each air density were taken at the rate of 2,000 per second, and from them were obtained the dimensions of the sprays and the rates of spray-tip penetration. The sprays were also injected against plastic… more
Date: December 4, 1934
Creator: Lee, Dana W.
Partner: UNT Libraries Government Documents Department
open access

Fuel vaporization and its effect on combustion in a high-speed compression-ignition engine

Description: "The tests discussed in this report were conducted to determine whether or not there is appreciable vaporization of the fuel injected into a high-speed compression-ignition engine during the time available for injection and combustion. The effects of injection advance angle and fuel boiling temperature were investigated. The results show that an appreciable amount of the fuel is vaporized during injection even though the temperature and pressure conditions in the engine are not sufficient to ca… more
Date: May 4, 1932
Creator: Rothrock, A. M. & Waldron, C. D.
Partner: UNT Libraries Government Documents Department
open access

Notes on New French Commercial Airplanes

Description: This document discusses the types of commercial planes ordered by Air France. Characteristics of the Wibault 670, the Dewoitine D.620, Bloch 300, and the Potez 620 airplanes are included. Pictures and diagrams of these aircraft are also included.
Date: April 4, 1935
Partner: UNT Libraries Government Documents Department
open access

The effect of valve timing upon the performance of a supercharged engine at altitude and an unsupercharged engine at sea level

Description: This investigation was conducted to determine the comparative effects of valve timing on the performance of an unsupercharged engine at sea level and a supercharged engine at altitude. The tests were conducted on the NACA universal test engine. The timing of the four valve events was varied over a wide range; the engine speeds were varied between 1,050 and 1,500 r.p.m.; the compression ratios were varied between 4.35:1 and 7.35:1. The conditions of exhaust pressure and carburetor pressure of a … more
Date: February 4, 1931
Creator: Schey, Oscar W. & Biermann, Arnold E.
Partner: UNT Libraries Government Documents Department
open access

Span-load distribution as a factor in stability in roll

Description: "This report gives the results of pressure-distribution tests made to study the effects on lateral stability of changing the span-load distribution on a rectangular monoplane wing model of fairly thick section. Three methods of changing the distribution were employed: variation in profile along the span to a thin symmetrical section at the tip, twist from +5 degrees to -15 degrees at the tip, and sweepback from +20 degrees to -20 degrees. The tests were conducted in a 5-foot closed-throat atmos… more
Date: March 4, 1931
Creator: Knight, Montgomery & Noyes, Richard W.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen