397 Matching Results

Search Results

Results: 1 - 24 next
open access

Effects of inlet icing on performance of axial-flow turbojet engine in natural icing conditions

Description: A flight investigation in natural icing conditions was conducted to determine the effect of inlet ice formations on the performance of axial-flow turbojet engines. The results are presented for icing conditions ranging from a liquid-water content of 0.1 to 0.9 gram per cubic meter and water-droplet size from 10 to 27 microns at ambient-air temperature from 13 to 26 degrees F. The data show time histories of jet thrust, air flow, tail-pipe temperature, compressor efficiency, and icing parameters… more
Date: May 25, 1950
Creator: Acker, Loren W. & Kleinknecht, Kenneth S.
Partner: UNT Libraries Government Documents Department
open access

Atmospheric Contamination Associated with Inert-Gas-Shielded, Consumable Electrode Welding

Description: Apparent excessive concentrations of atmospheric contamination which were reported to be associated with an inert-gas-shielded consumable electrode arc wielding operation were studied to evaluate the potential health hazards. A study was made of the concentrations of metal fume and gaseous products of the operation as well as the spectrum of ultraviolet radiation. Recommendations for necessary controls were made.
Date: July 25, 1955
Creator: Adley, F. E. & Gill, W. E.
Partner: UNT Libraries Government Documents Department
open access

Army Gas-Cooled Reactor Systems Program Monthly Progress Report: April 1959

Description: Abstract: This monthly progress report covers the activities of the Army Gas-Cooled Reactor System Program for April 1959. The program includes a water-moderated heterogeneous reactor (Gas-Cooled Reactor Experiment I), a graphite-moderated homogeneous reactor (Gas-Cooled Reactor Experiment II), a mobile gas-cooled reactor (ML-1), and the coordination of the Gas Turbine Test Facility. [It reports] the progress of each project, the associated tests and data evaluation, the applicable design crit… more
Date: May 25, 1959
Creator: Aerojet-General Corporation
Partner: UNT Libraries Government Documents Department
open access

Brief Review of Heat Transfer Problems Encountered in the Production of Magnetic Fields

Description: The design of internally cooled electrical coils for the production of high frequency intensity magnetic fields presents many new aspects and combinations of the familiar modes of heat transfer. However, the customary methodology appears to be sufficient for preliminary analysis and understanding of those problems. This methodology comprises the derivation of a qualitative, approximate equation expressing the relative performance of the various parts of a system, followed by an examination of … more
Date: May 25, 1959
Creator: Alexander, L. G.
Partner: UNT Libraries Government Documents Department
open access

Experimental Static Aerodynamic Forces and Moments at Low Speed on a Missile Model During Simulated Launching From the 25-Percent-Semispan and Wing-Tip Location of a 45 Degree Sweptback Wing-Fuselage Combination

Description: Report presenting an investigation at low speed in the 300 mph tunnel to determine the static aerodynamic forces and moments on a missile model during simulated launching from 25-percent-semispan and wing-tip locations of a wing-fuselage combination. Results regarding the differences in location and effects induced by the fuselage are provided.
Date: May 25, 1955
Creator: Alford, William J., Jr.; Silvers, H. Norman & King, Thomas J., Jr.
Partner: UNT Libraries Government Documents Department
open access

A Study of the Motion and Aerodynamic Heating of Missiles Entering the Earth's Atmosphere at High Supersonic Speeds

Description: From Summary: "A simplified analysis is made of the velocity and deceleration history of missiles entering the earth's atmosphere at high supersonic speeds. It is found that, in general, the gravity force is negligible compared to the aerodynamic drag force and, hence, that the trajectory is essentially a straight line. A constant drag coefficient and an exponential variation of density with altitude are assumed and generalized curves for the variation of missile speed and deceleration with alt… more
Date: August 25, 1953
Creator: Allen, H. Julian & Eggers, A. J., Jr.
Partner: UNT Libraries Government Documents Department
open access

The [Sigma/Alpha] Branching Ratio Of [Y*1]

Description: Recently a T=1 resonance in the [Alpha w] system called [Y*1] has been observed with a mass of 1385 Mev. Two types of resonances have been predicted that might relate this observation to other elementary-particle interactions: (1) P 3/2 resonances in the Alpha w and Sigma w systems predicted by global symmetry corresponding to the (3/2, 3/2) resonance of the wN system, (2) a spin-1/2 Y-w resonance resulting from a bound state in the KN system. The position and width of the observed [Y*1] resona… more
Date: April 25, 1961
Creator: Alston, Margaret H.; Alvarez, Luis W., 1911-1988; Eberhard, Phillippe; Good, Myron L.; Graziano, William; Ticho, Harold K., 1921-2020 et al.
Partner: UNT Libraries Government Documents Department
open access

Fabrication of Uranium Wire

Description: From abstract: "The present report describes experimental work performed to establish a procedure for the production of uranium metal wire. In all cases, the size of the initial rod was 1/2 inch diameter. Three materials were used: hot extruded tuballoy rod, high purity cast tuballoy rod, and cast U-235 rod."
Date: October 25, 1949
Creator: Anderson, R. E.; Taub, J. M. & Doll, D. T.
Partner: UNT Libraries Government Documents Department
open access

Flight measurements of the low-speed characteristics of a 35 degree swept-wing airplane with blowing-type boundary-layer control in the trailing-edge flaps

Description: Report presenting tests to determine the flight characteristics of an F-86 airplane equipped with a blowing-type boundary-layer-control installation on the trailing-edge flaps. The effectiveness of the flap was determined in conjunction with slatted leading edges and an inflatable rubber boot on the leading edge. Measurements were made of lift, drag, flow requirements, and computations for take-off, climb, and landing.
Date: October 25, 1956
Creator: Anderson, Seth B.; Quigley, Hervey C. & Innis, Robert C.
Partner: UNT Libraries Government Documents Department
open access

Neutron Remote Area Monitoring Systems

Description: The following report records measurements and evaluations of fast neutron levels in remote areas monitored by personnel.
Date: April 25, 1958
Creator: Appleby, Charles W.
Partner: UNT Libraries Government Documents Department
open access

An Isochronal Differential Microcalorimeter

Description: An isochronal differential-type microcalorimeter has been designed and constructed. As a result of its simple design it is very easy to handle the samples and assemble the calorimeter. Important to the operation of the calorimeter is a program, also working on the differential principle, that provides linear temperature rise of the samples. This calorimeter is used to measure very small energy releases such as those found in precipitation, stored energy, etc. It is demonstrated that the calorim… more
Date: February 25, 1963
Creator: Arndt, R. A. & Fujita, F. E.
Partner: UNT Libraries Government Documents Department
open access

Bromine Exchange in Graphite-Bromine Lamellar Compounds

Description: A kinetic study of the exchange of normal and radioactive bromine in graphite-bromine lamellar compounds has been made at temperatures of 30° to 50°C. Natural and synthetic graphite powders were investigated. Two alternative mechanisms for the exchange, volume diffusion and surface exchange, were considered. The data were in better agreement with the diffusion mechanism. Diffusion coefficients of 10 -9 to 10 -8 cm2/sec and an activation energy of 11 to 14 kcal/mole were calculated for the natur… more
Date: February 25, 1963
Creator: Aronson, Seymour
Partner: UNT Libraries Government Documents Department
open access

Liquid Metal Fuel Reactor Experiment Annual Technical Report: 1958

Description: Annual report of the Liquid Metal Fuel Reactor Experiment describing progress during calendar year 1958 and as well as an evaluation of progress and plans for future work.
Date: March 25, 1959
Creator: Babcock & Wilcox Company
Partner: UNT Libraries Government Documents Department
open access

N. S. Savannah Fuel Design and Development Program: Fuel Rod Vibration (Preliminary Report)

Description: This is a preliminary report on the investigation of the N.S. Savannah replacement fuel rod vibration amplitude when excited by water flowing parallel to the axis of the fuel rod. Methods of calculating the fuel rod frequency in air were verified by experiment. Work is continuing to establish the validity of methods of calculating natural frequencies in water and to confirm the correlation of flow induced vibration amplitude found in reference (1).
Date: September 25, 1959
Creator: Bailey, J. A. & Shields, C. M.
Partner: UNT Libraries Government Documents Department
open access

Direct Current Electromagnetic Pumps

Description: Abstract: "A number of direct current conduction type electromagnetic pumps for liquid metals were constructed. Pumping capacities of over 400 gpm and efficiencies of over 50 percent were obtained. NaK alloy at temperatures up to 400 C was used in the test. The large currents required were obtained from rectifiers or from a homopolar generator constructed for the purpose."
Date: October 25, 1949
Creator: Barnes, A. H.; Smith, F. A. & Whitham, G. K.
Partner: UNT Libraries Government Documents Department
open access

Static Corrosion Tests of Fabrication Material for D-12 Waste Evaporator

Description: Three types of stainless steel (309 SCB, Carpenter 20, 304-L) were exposed to both the liquid and vapor phase of each of three types of solutions. The time of exposure totaled ten days during which the specimens were cleaned and weighed periodically. The three synthetic D-12 waste solutions contained respectively chrome-high chloride, chrome-low chloride and high chloride sans chromium. The solutions were renewed at each weighing.
Date: June 25, 1953
Creator: Barnes, R. G.
Partner: UNT Libraries Government Documents Department
open access

Evaluation of End- and Radial-Burning Solid Fuels in Ram Jets Mounted in a Free Jet at Mach Numbers of 2.0, 2.2, and 2.3

Description: Report presenting testing of two types of solid fuels in a 6.5-inch-diameter ram-jet engine mounted in a free supersonic jet at several Mach numbers. Results regarding radial-burning fuel, end-burning fuel, and a comparison of the two are provided. Unlike in previous testing, no fuel breakup was noted due to recently developed molding techniques.
Date: November 25, 1952
Creator: Bartlett, Walter A., Jr.
Partner: UNT Libraries Government Documents Department
open access

Flight Test of an End-Burning Solid-Fuel Ramjet

Description: Report presenting a flight investigation of a rocket-launched ram-jet engine incorporating an end-burning solid fuel. Results regarding acceleration, altitude, booster separation, survival time of booster adapter, and air specific impulse are provided.
Date: March 25, 1954
Creator: Bartlett, Walter A., Jr.
Partner: UNT Libraries Government Documents Department
open access

Investigation of Stresses Due to Thermal Gradients in Typical Aircraft Structures

Description: Memorandum presenting an investigation of a series of five 75S-T6 aluminum-alloy elementary skin and spar-cap combinations with skin varying from 0.051 to 0.500 inch in thickness to determine the temperature and stress gradients resulting from the application of heat to the surface. The data are presented in the form of tables of the measured temperatures and stresses calculated from the measured strains.
Date: January 25, 1952
Creator: Barzelay, Martin E. & Boison, James C.
Partner: UNT Libraries Government Documents Department
open access

High Energy Fission and Spallation of Uranium

Description: From introduction: "This report is an attempt to examine, semiquantitavely, the way the competition between neutron emission and fission varies for heavy nuclei as a function of nuclear type and excitation energy. Many of the ideas herein are the results of discussions with R. H. Goeckermann and W. Heckrotte of the University of California Radiation Laboratory."
Date: February 25, 1954
Creator: Batzel, Roger Elwood
Partner: UNT Libraries Government Documents Department
open access

Progress Report on AEC Contract on Research and Development Program on Scintillation Crystals: Period 1 January 1956 to 1 April 1956

Description: From Abstract: "This report covers the preliminary literature survey and the screening of activated cesium iodide and several alkali halides to qualitatively determine their luminerscence. The report also includes a proposal of the future work and a proposed budget for the 1957 fiscal year."
Date: April 25, 1956
Creator: Beadle, Robert
Partner: UNT Libraries Government Documents Department
open access

An Experimental Determination of Fission Product Heating After Shutdown of the Low Intensity Training Reactor

Description: Technical report containing the general arrangement of the Low Intensity Training Reactor and outcomes of experiments that have been performed in the reactor to measure the rate of fission product heat dissipation from the fuel pieces after loss of water. [From Summary, Introduction]
Date: September 25, 1951
Creator: Beall, S. E.
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Data on the Longitudinal and Lateral-Directional Rotary Derivatives of a Straight-Wing, Research Airplane Configuration at Mach Numbers From 2.5 to 3.5

Description: Memorandum presenting the results of wind-tunnel oscillation tests to measure the rotary derivatives of a research airplane configuration at supersonic speeds. Measurements were made of the damping in yaw, pitch, and roll, the static longitudinal and directional stability derivatives, the effective-dihedral derivative, the rolling moment due to yawing, and the yawing moment due to rolling. The configuration was found to be statistically stable throughout the Mach number range, although its stab… more
Date: March 25, 1958
Creator: Beam, Benjamin H. & Endicott, Kenneth C.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen