Search Results

open access

Radionuclides in plankton from the South Pacific Basin

Description: We have initiated an investigation of the utility of marine plankton as bioconcentrating samplers of low-level marine radioactivity in the southern hemisphere. A literature review has shown that both freshwater and marine plankton have trace element and radionuclide concentration factors (relative to water) of up to 10/sup 4/. We participated in Operations Deepfreeze 1981 and 1982, collecting a total of 48 plankton samples from the USCGC Glacier on its Antarctic cruises. Battelle Pacific Northw… more
Date: March 23, 1984
Creator: Marsh, K.V. & Buddemeier, R.W.
Partner: UNT Libraries Government Documents Department
open access

Chemical Technology Division, Unit Operations Section Monthly Progress Report, February 1962

Description: In the operation of 6-in.-dia. foam-liquid columns, increase in either the liquid flow or foam flow caused increased channeling with increased HTU. Flooding values for the Immi mixer-settler were obtalned using the amine extraction final cycle Pu flowsheet. Two tests of the addltlon of uranyl nitrate to a thoria sol were made, one of which gave a good product and the other a product which disintegrated during calcination. Material balances for 22 waste calcination runs are summarized. (auth)
Date: August 23, 1962
Creator: Whatley, M. E.; Haas, P. A.; Horton, R. W.; Ryon, A. D.; Suddath, J. C. & Watson, C. D.
Partner: UNT Libraries Government Documents Department
open access

Chemical Technology Division, Unit Operations Section Monthly Progress Report, June 1961

Description: An interfacial viseometer was built for use in an interfacial phenomena study. Installation of a 6-in.-ID foam separation column system was completed. The dispersiondrying-sintering characteristics of six low-nitrate batches of thoria sol material were studied. The average effective porosity of the CuO pellets used for reactor helium purification was determined to be 0.0545 for H/ sub 2/ transport and 0.0526 for CO transport. In continuous Zirflex dissolution studies, no H/sub 2/O/sub 2/ decomp… more
Date: January 23, 1962
Creator: Whatley, M. E.; Haas, P. A.; Horton, R. W.; Ryon, A. D.; Suddath, J. C. & Watson, C. D.
Partner: UNT Libraries Government Documents Department
open access

Synergistic capture mechanisms for alkali and sulfur species from combustion

Description: This report presents work done on a laboratory combustor in an attempt to identify mechanisms that govern the simultaneous capture of alkali and sulfur species using sorbent injection techniques. The mechanisms of capture fall into two broad categories i.e. Physical transport of alkali species (in vapor or condensed phase) to the sorbent surface and surface reaction between the alkali species and the sorbents. Water solubility, though not specific, has been used to get an indication of relative… more
Date: April 23, 1992
Creator: Peterson, T.W.; Shadman, F.; Wendt, J.O.L. & Mwabe, P.O.
Partner: UNT Libraries Government Documents Department
open access

A TRANSISTORIZED ALPHA COUNTER FOR AN ALPHA GAUGE

Description: A transistorized instrument prototype was designed and constructed to replace a vacuum-tube instrument in an alpha gauge, which measures the thickness density of gases. The instrument amplifies, shapes, discriminates, and counts alpha pulses from a Au-Si surface-barrier detector exposed to an alpha source in a gas-filled chamber. The circuit consists of a charge-sensitive preamplifier, a main amplifier with pulse clipping, a Schmitt trigger, a diode pump, and a count rate meter. Preliminary tes… more
Date: August 23, 1962
Creator: Kopp, M.C.
Partner: UNT Libraries Government Documents Department
open access

Axicell design for the end plugs of MFTF-B

Description: Certain changes in the end-plug design in the Mirror Fusion Test Facility (MFTF-B) are described. The Laboratory (LLNL) proposes to implement these changes as soon as possible in order to construct the machine in an axicell configuration. The present physics and technology goals as well as the project cost and schedule will not be affected by these changes.
Date: April 23, 1982
Creator: Thomassen, K.I. & Karpenko, V.N.
Partner: UNT Libraries Government Documents Department
open access

RADIOISOTOPE AND RADIATION APPLICATIONS QUARTERLY PROGRESS REPORT. SECTION I. USE OF INTRINSIC RADIOACTIVE TRACERS FOR PROCESS CONTROL. SECTION II. RADIATION-INDUCED GRAFT-POLYMERIZATION STUDIES

Description: Research was continued in the areas of intrinsic radioactive tracers for industrial process control and the influence of structural factors in radiation- induced graft polymerization. The use of in-process isotope neutron soarces to produce short-lived radiotraces is discussed. A 10c Po--Be neutron source was obtained for exploratory experiments. The design and construction of a neutronsource storage shield and an activatioa-cell holder are underway. The effect of structural factors oii the eIf… more
Date: October 23, 1961
Creator: McFarling, J.L.; Gluck, P.; Kircher, J.F.; Sunderman, D.N.; Sliemers, F.A.; Luttinger, M. et al.
Partner: UNT Libraries Government Documents Department
open access

THE EFFECTS OF INTERNAL HEAT GENERATION ON POT CALCINATION RATES FOR RADIOACTIVE WASTES

Description: Methods by which the radial deposition mechanism was determined in experiments with simulated waste solutions are reviewed. Based on this mechanism, an expression for the rate of solid deposition with internal heat generation was developed by a combined heat and material balance. A sample calculation for Purex waste showed that a moderate heat generation rate of 5000 Btu/hr/ft/sup 3/ would decrease the time to fill a 12-in.-dia calcination vessel from 78 to 55 hr. For the calcination stage of t… more
Date: October 23, 1961
Creator: Perona, J.J.
Partner: UNT Libraries Government Documents Department
open access

Studies of Nuclear Resonant Absorption of Gamma Rays. Quarterly Report No. 4 Covering Period June 1, 1961 to August 31, 1961

Description: The effect of polarizing mngnetic field intensity on the nuclear resonant absorption was studied by varying the field strength at a 1-mc Co/sup 57/ source from 0 to 1000 gauss while keeping the absorber between the poles of a magnet having a fixed field of 800 gauss. The rates of resonance absorption change with field intensity were greatest in the region of 300 to 1000 gauss, and the% nuclear resonant absorption for 1000-gauss fields was 8.5 and 26% for perpendicular and parallel fields, respe… more
Date: February 23, 1962
Creator: Ezop, J. J.
Partner: UNT Libraries Government Documents Department
open access

Inventory of power plants in the United States 1990. [Contains glossary]

Description: The purpose of this publication is to provide year-end statistics about electric generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). The publication also provides a 10-year outlook of future generating unit additions. The Summary Statistics chapter contains aggregate capacity statistics at the national and various regional levels for operable electric generating units and planned electric generating unit additions. Aggregate capacit… more
Date: October 23, 1991
Partner: UNT Libraries Government Documents Department
open access

A STUDY OF THE SHIELD OF THE UNIVERSITY OF ILLINOIS TRIGA MARK II RESEARCH REACTOR

Description: Detailed measurements were made of the fast-neutron and gamma dose rates and the thermal-neutron fluxes existing at the surfaces of the biological shield of the University of Illinois TRIGA Mark II Research Reactor. Dose rates and fluxes were found to be extremely low. A comparison was made by means of threshold foil techniques between the fast-neutron flux in a beam hole of the reactor during steady-state operation at 1 kw and during a nominal 250 Mw, 30 msec pulse produced by rapid insertion … more
Date: April 23, 1962
Creator: Blosser, T.V.; Freestone, R.M. Jr. & Miller, J.M.
Partner: UNT Libraries Government Documents Department
open access

Study on reduction of accessory-horsepower requirements. Third quarterly progress report

Description: The objective of this study program is to minimize automotive accessory horsepower consumption, and thereby maximize overall vehicle fuel economy, by utilizing continuously variable speed drives or auxiliary power units (APUs) in a standard passenger automobile. As an aid to definitizing accessory performance, load requirements and fuel economy, a baseline vehicle has beeen established. This vehicle is a conventional intermediate size 5- or 6-passenger automobile with a 4.1 to 5.7 liter (250 to… more
Date: April 23, 1975
Partner: UNT Libraries Government Documents Department
open access

Fast Flux Test Facility. Design and Development Quality Assurance Requirements for the FFTF

Description: The document is presented to provide general management requirements for Pacific Northwest Laboratory (PNL) and contractor design and development quality assurance programs to assure the required quality level of the various items required for the FFTF. The document is applicable as imposed by the contract to FFTF contractors and subcontractors. The document is also applicable to PNL design and development activities related to the FFTF.
Date: October 23, 1968
Creator: Albert, W. G.
Partner: UNT Libraries Government Documents Department
open access

A beam profile monitor for small electron beams

Description: Measurement of beam properties at the foci of high energy linacs is difficult due to the small size of the waists in proposed and existing accelerators (1 nm {minus} 2 {mu}). This paper considers the use of bremsstrahlung radiation from thin foils to measure the size and phase space density these beams using nonimaging optics. The components of the system are described, and the ultimate resolution, evaluated theoretically for the case of the Final Focus Test Beam at Stanford Linear Accelerator … more
Date: January 23, 1991
Creator: Norem, J.
Partner: UNT Libraries Government Documents Department
open access

LOFT DTT rake pin stress analysis

Description: A stress analysis of the 3/8-inch and 1/4-inch pins which hold the rake assembly to the flange was performed and shows stresses to be lower than the Class 1 allowables of the ASME Boiler and Pressure Vessel Code. The alternating pin stresses were found to be below the endurance limit and fatigue failure will not occur. The rake assembly was assumed to be loaded by steady drag and lift forces and alternating vortex shedding forces.
Date: January 23, 1979
Creator: Mosby, W.R.
Partner: UNT Libraries Government Documents Department
open access

Analysis of Lime-Slurry Stirred Tank Carbonation Reactor

Description: Gas residence time distributions were determined for a stirred tank carbonation reactor. Empirical correlations for the first and second moments of the residence time distribution (RTD) curves as functions of flow rates and impeller speeds were obtained. Decontamination factors for /sup 85/Kr were measured.
Date: September 23, 1977
Creator: McAleese, J. P.; Belt, B. A.; Datesh, J. R. & Shaeffer, M. C.
Partner: UNT Libraries Government Documents Department
open access

Conceptual model for regional radionuclide transport from a basalt repository site. Final draft, technical memorandum

Description: This technical memorandum was prepared to: (1) describe a typical basalt radionuclide repository site, (2) describe geologic and hydrologic processes associated with regional radionuclide transport in basalts, (3) define the parameters required to model regional radionuclide transport from a basalt repository site, and (4) develop a ''conceptual model'' of radionuclide transport from a basalt repository site. In a general hydrological sense, basalts may be described as layered sequences of aqui… more
Date: May 23, 1980
Creator: Walton, W.C.; Voorhees, M.L. & Prickett, T.A.
Partner: UNT Libraries Government Documents Department
open access

Radian DART microcomputer system hardware documentation operation system description. DART II documentation

Description: This operator's manual for the DART II Data Acquisition, Reduction, and Transmission system is divided into the following sections: system capabilities and configuration; ways in which the microprocessor-based central processing unit communicates with the memory and peripheral devices; theory of operation for the system components; and a section of reference data including schematic diagrams, cable lists, device specification sheets and other detailed information. (GHT)
Date: May 23, 1979
Partner: UNT Libraries Government Documents Department
open access

Buildup studies for MFTF-B

Description: A one-dimensional radial transport code which was developed to study radial transport in tandem mirror machines has been used to perform buildup studies for the central-cell plasma of the proposed MFTF-B experiment. The effects of the cold, unpumped, neutral gas (which accompanies the hot, neutral-beam injection in the central cell) upon the central-cell plasma have been studied for the low-epsilon (epsilon Identical with (..cap omega../sub pi//..cap omega../sub ci/)2) mode and for the two-comp… more
Date: April 23, 1980
Creator: Gilmore, J. M.
Partner: UNT Libraries Government Documents Department
open access

SNAP-27 follow-on quality assurance plan

Description: The Quality Plan for the SNAP-27 Follow-On Program describes the manner in which the Isotope Power Systems Operation of the General Electric Space Division will control product quality. NASA NHB5300.4 (1B) and AEC QASL-SNAP-1 and 2 have been used as guides in the development of this plan and, upon approval by the AEC, this plan will serve as a policy document to be utilized in implementing the SNAP-27 Follow-On Quality Program.
Date: September 23, 1970
Creator: Mason, F.C.
Partner: UNT Libraries Government Documents Department
open access

Development of instrumentation for magnetic nondestructive evaluation

Description: The use of failure-prone components in critical applications has been traditionally governed by removing such components from service prior to the expiration of their predicted life expectancy. Such early retirement of materials does not guarantee that a particular sample will not fail in actual usage. The increasing cost of such life expectancy based operation and increased demand for improved reliability in industrial settings has necessitated an alternate form of quality control. Modern appl… more
Date: September 23, 1991
Creator: Hariharan, S.
Partner: UNT Libraries Government Documents Department
open access

Liquid fuels production from biomass. Progress report No. 8, April 1-June 30, 1979

Description: The current program to convert biomass into liquid hydrocarbon fuels is an extension of the previous program to ferment marine algae to acetic acid. In that study, it was found that marine algae could be converted to higher aliphatic organic acids and that these acids could be readily removed from the fermentation both by membrane or liquid-liquid extraction. It was then proposed to convert these higher organic acids to aliphatic hydrocarbons via Kolbe Electrolysis, which may be used as a diese… more
Date: July 23, 1979
Creator: Sanderson, J. E.; Garcia-Martinez, D. V.; George, G. S.; Dillon, J. J.; Molyneaux, M. S.; Barnard, G. W. et al.
Partner: UNT Libraries Government Documents Department
open access

Progress report for the Division of Safeguards and Security: January--June 1977

Description: Development of the calorimeter equilibrium prediction program has been completed, and tests of the software program have been conducted on calorimeters ranging from 1 to 6 in. (2.5 to 15 cm) in diameter and power inputs between 0.1 and 8.3 W. Equilibrium values have been predicted with relative accuracies of better than 0.1% (95% confidence) and with an average time improvement factor of 2.1, which represents a 52% time saving, for every test case. A computer code is being developed by the Univ… more
Date: December 23, 1977
Creator: Ratay, R.P. (ed.)
Partner: UNT Libraries Government Documents Department
open access

Evaluation of Effectiveness of the Turco Low Profile Turbulator Reg Sign

Description: This document discusses a turbulator which utilizes a heated chemical bath to reduce smearable contamination from small parts and tools. It is comprised of two agitators programmed to automatically alternate the flow of the cleaning solution within the tank in four separate and distinct high velocity flow patterns allowing access to the entire surface area of the part or tool being decontaminated. The turbulator is being evaluated to determine if agitation increases the effectiveness of waste m… more
Date: October 23, 1990
Creator: Grittmann, S.; McGlynn, J. F.; Long, J. R. & Rankin, W. N.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen