Search Results

open access

100-K Area electrical power system load and voltage study for project CG-775. Revision

Description: The proposed increased water capacity for 100-K plants will increase the electrical load to be supplied. The load study showed that the capacity of the existing 13.8 kV system is adequate to carry the increased loads proposed for Project CG-775, while for the 5 kV system, an expanded power system is proposed. Likewise, the voltage regulation on the kV system bus will be excessive, and voltage regulators should be added.
Date: February 22, 1960
Creator: Thorson, W. R.
Partner: UNT Libraries Government Documents Department
open access

AEC Group Shelter

Description: As a result of atomic shelter tests and field experiments condueted over the past nine years, it has been conclusively shown that shelters provide the only promising means of civilian protection in the event of a nuclear war. Design details are presented for a group shelter to accommodate 100 persons of all age groups and both sexes. The shelter structure is a multiplate corrugated- steel arch set on a concrete slab with end walls of bridge plate sheathing. The entire structure is covered with … more
Date: June 22, 1960
Partner: UNT Libraries Government Documents Department
open access

Apparatus for the Study of Fission-Gas Release From Fuels During Postirradiation Heating at Temperatures Up to 1600 C

Description: An apparatus to study rare-gas fission-product release from nuclear fuel materials during postirradiation heating was developed. Xenon and krypton fission gases escaping from a small specimen during heating at constant temperature are measured using a continuous radioactivity monitor and charcoal adsorption traps. The rhodium-wound furnace is capable of operation at 1600 deg C. Helium carrier gas is purified by activated alumina, copper, and zirconium traps, and the oxygen and moisture contents… more
Date: July 22, 1960
Creator: Barnes, R. H. & Sunderman, D. N.
Partner: UNT Libraries Government Documents Department
open access

Chemical Processing Department monthly report for January 1960

Description: Production of Pu nitrate, UO{sub 3}, and unfabricated Pu metal met schedules. Decontamination performance of Purex process continued below standard. The cerium-144 cask is being redesigned. A ``powered ferret``, for driving a scintillation counter through a conduit to monitor ground activity beneath waste storage tanks, is being designed.
Date: February 22, 1960
Partner: UNT Libraries Government Documents Department
open access

Chemical Processing Department monthly report for July 1960

Description: Production of Pu nitrate from separations plant during this month was below forecast. UO{sub 3} production, shipments met schedules; so did unfabricated Pu shipments. Purex plant was stopped to replace the final waste concentrator (F-11) (leak). Two Pu-U partition failures were attributed to foreign organic material in the nitric acid; the Pu product was kept within specifications by adding NaF and ANN to ion exchange feed stream. A Np recovery run was started in Redox, and dissolution was star… more
Date: August 22, 1960
Partner: UNT Libraries Government Documents Department
open access

Conical Refraction in Crystal Optics and Hydromagnetics

Description: When light propagates with the wave normal in the direction of an optic axis of a biaxial crystal, the usual ray theory breaks down. This phenomenon can be analyzed by means of an asymptotic solution of Maxwell's equations. The intensity is governed by a partial differential equation within the phase surfaces, instead of ordinary differential equations along rays. This example slows that light does not always propagate along rays. A similar phenomenon occurs in hydromagnetics.
Date: April 22, 1960
Creator: Ludwig, Donald
Partner: UNT Libraries Government Documents Department
open access

A Corrosion Study of Welded Stainless Steel Fuel Elements

Description: This report covers fuel element corrosion studies conducted from April,1959 through July,1960, designed to aid in selecting and evaluating SM-2 fuel element welding techniques
Date: December 22, 1960
Creator: Bergen, C. R.
Partner: UNT Libraries Government Documents Department
open access

A CORROSION STUDY OF WELDED STAINLESS STEEL FUEL ELEMENTS

Description: Fuel element corrosion studies designed to and in selecting and evaluating SM-2 fuel element welding techniques are discussed. Tests on type 347 ss plate type fuel elements welded by the selected tungsten inert gas technique showed good corrosion integrity of specimens under a variety of conditions including a 500-hr test under simulated SM-2 conditions of flow and coolant chemistry. (auth)
Date: December 22, 1960
Creator: Bergen, C. R.
Partner: UNT Libraries Government Documents Department
open access

Current status -- Second generation process tube internal corrosion

Description: Seven water leaks during the past year because of internal corrosion of second generation process tubes have emphasized the need for additional corrosion information. Numerous out-of-pile and probolog examinations have been made to determine the nature of the corrosion, and mixer fuel elements currently are charged in central zone tubes in order to reduce the corrosion rates. This document presents the data obtained to date as a general description of the tube condition at the time when the mix… more
Date: June 22, 1960
Creator: Young, J. R.
Partner: UNT Libraries Government Documents Department
open access

Density and Hydrogen Content of Uranium Oxide Cakes and Slurries

Description: The work described was undertaken to provide data for nuclear safety studies concerning NPF reprocessing equipment. The original objective was to determine the uranium density and water (hydrogen) content of UO2-H2O mixtures ranging from compact centrifuge cakes to dilute slurries. The scope was later expanded to include mixtures of UO2 with hydrocarbon oil and mixtures of UO3-H2O.
Date: March 22, 1960
Creator: Amos, L. C.
Partner: UNT Libraries Government Documents Department
open access

Development of a Welding Process for End Closures on NPR and KER Fuel Element

Description: With the development of the zircaloy-2 clad uranium fuel element, it was necessary to develop a method of closing the end of the element after the extruded tubes were cut to the desired length. Regardless of the ultimate design of the closure, a satisfactory zircaloy-2 fusion welding technique had to be worked out. The first fully successful welding was performed with electron beam welding in a vacuum chamber. To make satisfactory welds, the electron beam welding involved time and equipment, pl… more
Date: February 22, 1960
Creator: Corey, T. B.; DeWitt, D. E. & Nelson, I. V.
Partner: UNT Libraries Government Documents Department
open access

Development of High-Strength Corrosion-Resistant Zirconium Alloys

Description: Approximately 100 ternary and quaternary spongezirconium alloys were screened for structural and cladding applications in a natural-uranium-fueled heavy-watermolerated power reactor. The alloy additions studied included2 to 4 wt.% Sn, 0.5 to 2 wt.% Mo, and 1 to 3 wt.% Nb. The effect of 0.1 wt.% Fe and 0.05 wt.% Ni additions to the experimental alloys was evaluated. All compositions were are melted, rolled at 850 ction prod- C from a helium- atmosphere furnace, vacuum annealed 4 hr at 700 ction … more
Date: February 22, 1960
Creator: De Mastry, J. A.; Shober, F. R. & Dickerson, R. F.
Partner: UNT Libraries Government Documents Department
open access

DEVELOPMENT OF HIGH-STRENGTH NIOBIUM ALLOYS FOR ELEVATED-TEMPERATURE APPLICATIONS

Description: A study to improve the elevated-temperature strength of niobium by solloving has resulted not only- in greatly improved strengths at 1200 and 1470 deg F but also in the development of improved fabrication techniques for these alloys. The most important step in the fabric:ition procedure of niobium and niobium-base allows is the initial breakdown of the cast structure. The cast structure of 1.84 wt. 4 chromium, 3.21 wt.% chromium. 4.33 wt. ' zirconium, and 20.5 wt.% titanium-4.28 wt. = chromium … more
Date: February 22, 1960
Creator: De Mastry, J. A.; Shober, F. R. & Dickerson, R. F.
Partner: UNT Libraries Government Documents Department
open access

Expansion task force: Old reactors speed of control for no overbore cases

Description: The Criteria for Speed of Control must be met for all cases being considered in the Expansion Studies. These Criteria are dependent upon the ratio Volume of water/volume of uranium in the process channel, the reactor power level, and the rate at which the vertical rods are released and inserted into the reactor. For those cases wherein the graphite channel is overbored by 0.200 inch., the criteria can generally be met for the power levels under consideration since the ratio of Vw/Vu is maintain… more
Date: February 22, 1960
Creator: Gilbert, W. D.; Carlson, P. A. & Nechodom, W. S.
Partner: UNT Libraries Government Documents Department
open access

Final report on program for using X-8001 aluminum alloy cladding material for Hanford fuel elements: PT-IP-43-A-84-MT, IP-80-A-91-FP and IP-2-I-99-FP

Description: Use of X-8001 Al alloy as cladding for Hanford reactors was initiated because of superior (laboratory) resistance to intergranular corrosion over that of C-64 alloy. However, since severe pitting attack was observed intermittently, an evaluation was carried out on X-8001 alloy fuel element cladding.
Date: July 22, 1960
Creator: Hodgson, W. H.
Partner: UNT Libraries Government Documents Department
open access

Gas-Cooled Reactor Project Quarterly Progress Report: June 1960

Description: Report documenting ongoing research and developments at the Oak Ridge National Laboratory's Gas-Cooled Reactor Project. Design Investigations: The effects on the power distribuestablished. A mathematical model was developed for studying shifting of the coolant stream as it moves along a rod in order to predict the temperatures of the parallel streams as they progress through the reactor. A fuelelement life code developed for computing the internal temperature structure, the amount of fission g… more
Date: August 22, 1960
Creator: Oak Ridge National Laboratory
Partner: UNT Libraries Government Documents Department
open access

An Investigation of the Structural Integrity of Selected Components of the Oak Ridge Research Reactor

Description: An investigation was made to determine the structural behavior of selected components of the Oak Ridge Research Reactor for increased power level conditions. It was found that a reactor cooling water outlet temperature of 150 deg F will cause severe plastic strain cycling in the aluminum housings for the large test facilities. Increasing the reactor cooling water flow rate of 21,000 gpm will cause plastic deformations in certain reaons of the core box. These latter deformations can be tolerated… more
Date: July 22, 1960
Creator: Corum, J M; Greenstreet, B L; Maxwell, R L & Rosenthal, M W
Partner: UNT Libraries Government Documents Department
open access

Irradiation Processing Department Monthly Record Report: December 1959

Description: This document details activities of the irradiation processing department during the month of December, 1959. A general summary is included at the start of the report, after which the report is divided into the following sections: Research and Engineering Operations; Production and Reactor Operations; Facilities Engineering Operation; Employee Relations Operation; and Financial Operation.
Date: January 22, 1960
Creator: Greninger, A. B.
Partner: UNT Libraries Government Documents Department
open access

Irradiation Processing Department, monthly record report, February, 1960

Description: This document details activities of the irradiation processing department at the Hanford Reservation during the month of February, 1960. A general summary is included at the start of the report, after which the report is divided into the following sections: Research and Engineering Operation; Manufacturing Operation; Facilities Engineering Operation; Relations Practices Operation; Financial Operation; and NPR operation.
Date: March 22, 1960
Partner: UNT Libraries Government Documents Department
open access

The LRL Capture-Gamma Coincidence Spectrometer

Description: Abstract. A fast-slow coincidence scintillation spectrometer for gamma-gamma cascade measurements following thermal neutron absorption in nuclei is now in operation at the Livermore 1-megawatt pool-type reactor. Design features of the spectrometer and experimental techniques in its use are discussed with particular emphasis on the application of the recently introduced sum-coincidence method for analysis of capture-gamma double cascades. A new technique for the determination of added neutron bi… more
Date: April 22, 1960
Creator: Schwäger, Joseph Edward
Partner: UNT Libraries Government Documents Department
open access

Magnetic Core Tests for Pulsed Operation at 30 Nanoseconds Pulse Width

Description: The magnetic properties of core materials ae investigated for a pulse width of 30 nanoseconds. Methods of testing which are necessitated by the sort pulse width are explained and the design of the pulser which is capable of 0.2 megawatt peak power is described. The data obtained if evaluated and presented for the various materials which were tested.
Date: August 22, 1960
Creator: Reeser, Gilbert A.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen