151 Matching Results

Search Results

Results: 1 - 24 next
open access

High-speed wind tunnels

Description: Wind tunnel construction and design is discussed especially in relation to subsonic and supersonic speeds. Reynolds Numbers and the theory of compressible flows are also taken into consideration in designing new tunnels.
Date: November 1936
Creator: Ackeret, J.
Partner: UNT Libraries Government Documents Department
open access

Coal-Mine Accidents in the United States, 1934

Description: Report compiled by the U.S. Bureau of Mines including statistics on fatal and non-fatal accidents in coal mines located in the United States as well as data regarding the various operations (e.g., number of miners employed and average production). The information is organized into tables for comparison and the text draws some overall conclusions in the summary.
Date: 1936
Creator: Adams, W. W.; Geyer, L. E. & Parry, M. G.
Partner: UNT Libraries Government Documents Department
open access

Metal-Mine Accidents in the United States During the Calendar Years: 1933-34

Description: Report issued by the U.S. Bureau of Mines covering accidents that happened in metal mines located in the United States including statistics for injuries, fatalities, kinds and causes of accidents, and operational data, such as number of mine workers and shifts worked.
Date: 1936
Creator: Adams, William W. & Kolhos, M. E.
Partner: UNT Libraries Government Documents Department
open access

Quarry Accidents in the United States During the Calendar Year 1934

Description: Report published by the U.S. Bureau of Mines which is a compilation of accidents in quarries located in the United States with data regarding the number and kinds of accidents as well as information about the mining operations (e.g., number of men employed, kinds of quarries, amount of work performed, etc.).
Date: 1936
Creator: Adams, William W. & Wrenn, Virginia E.
Partner: UNT Libraries Government Documents Department
open access

Tanks test of a model of the hull of the Navy PB-1 flying boat - N.A.C.A. Model 52

Description: A model of the hull of the Navy PB-1 flying boat was tested in the N.A.C.A. tank as part of a program intended to provide information regarding the water performance of hulls of flying boats of earlier design for which hydrodynamic data have heretofore been unavailable. Tests were made according to the general method over the range of practical loadings with the model both fixed in trim and free to trim. A free-to-trim test according to the specific method was also made for the design load and … more
Date: August 1936
Creator: Allison, John M.
Partner: UNT Libraries Government Documents Department
open access

Tank tests of models of flying boat hulls having longitudinal steps

Description: Four models with longitudinal steps on the forebody were developed by modification of a model of a conventional hull and were tested in the National Advisory Committee for Aeronautics (NACA) tank. Models with longitudinal steps were found to have smaller resistance at high speed and greater resistance at low speed than the parent model that had the same afterbody but a conventional V-section forebody. The models with a single longitudinal step had better performance at hump speed and as low hig… more
Date: July 1936
Creator: Allison, John M. & Ward, Kenneth E.
Partner: UNT Libraries Government Documents Department
open access

The Mammals and Life Zones of Oregon

Description: From introduction: "Summary of the life zones and mammals of Oregon with emphasis on providing reliable information on the management of wildlife. Importance for identifying those species which are state and national assets, and those species of less value or destructive habits."
Date: 1936
Creator: Bailey, Vernon
Partner: UNT Libraries Government Documents Department
open access

Geology of the Monument Valley-Navajo Mountain Region, San Juan County, Utah

Description: From abstract: The Monument Valley-Navajo Mountain region is part of the Colorado Plateau and includes about 1,100 square miles in San Juan County, southeastern Utah, lying between the San Juan and Colorado Rivers on the north and the Utah-Arizona State line on the south. Included in the region are Navajo Mountain, the Rainbow Natural Bridge, and a part of the picturesque Monument Valley.
Date: 1936
Creator: Baker, Arthur A.
Partner: UNT Libraries Government Documents Department
open access

Tank Tests of a Model of the NC Flying-Boat Hull - N.A.C.A. Model 44

Description: "A 1/7.06 full-size model of the NC-type hull was tested in the N.A.C.A. tank by both the general method and the specific or free-to-trim method. The results of the tests are given in curves plotted as non dimensional coefficients and are compared with the test results of N.A.C.A. model 11-A. The NC model (N.A.C.A. model 44) shows higher resistance than model 11-A at hump speed but lower resistance at high speeds. Model 44 has a higher best trim angle at the jump and a lower maximum positive tr… more
Date: May 1936
Creator: Bell, Joe W.
Partner: UNT Libraries Government Documents Department
open access

Relative Efficiencies and Design Charts for Various Engine-Propeller Combinations, Special Report

Description: "The relative efficiencies of various engine-propeller combinations were the subject of a study that covered the important flight conditions, particularly the take-off. Design charts that graphically correlate the various propeller parameters were prepared to facilitate the solution of problems and also to clarify the conception of the relationships of the various engine-propeller design factors. It is shown that, among the many methods for improving the take-off thrust, the use of high-pitch, … more
Date: September 1936
Creator: Biermann, David
Partner: UNT Libraries Government Documents Department
open access

Charts for Checking the Stability of Compression Members in Trusses

Description: "The present report contains a set of charts developed for computing the fixity effect on a compression member in a truss through its adjacent members, the amount of fixity being considered variable with the particular total truss load. The use of the charts is illustrated on two- and three-bay systems, as well as on a triangular truss" (p. 1).
Date: July 1936
Creator: Borkmann, K.
Partner: UNT Libraries Government Documents Department
open access

Geomorphology of the North Flank of the Uinta Mountains

Description: From introduction: The geologic record of the Tertiary period in the Green River Basin of southwestern Wyoming consists, in a broad way, of two quite different parts. The history of the first part, lasting through the Eocene epoch and perhaps on into the early Oligocene, was recorded in a thick series of sedimentary rocks of fluviatile and lacustrine origin. The history of the second part was recorded chiefly by successive stages of stream planation and stream trenching, but also in part by flu… more
Date: 1936
Creator: Bradley, Wilmot H.
Partner: UNT Libraries Government Documents Department
open access

Cooling tests of a single-row radial engine with several NACA cowlings

Description: The cooling of a single-row radial air-cooled engine using several cowling arrangements has been studied in the NACA 20-foot wind tunnel. The results show the effect of the propeller and several cowling arrangements on cooling for various values of the indicated horsepower in the climb condition. A table giving comparative performance of the various cowling arrangements is presented. The dependence of temperature on indicated horsepower and pressure drop across the baffles is shown by charts. O… more
Date: August 20, 1936
Creator: Brevoort, M. J.; Stickle, George W. & Ellerbrock, Herman H., Jr.
Partner: UNT Libraries Government Documents Department
open access

Combustion-engine temperatures by the sodium line-reversal method

Description: The sodium line-reversal method has been used in some preliminary measurements of flame temperature. Improvements in the method involving a photographic recorder and a means of correcting for the dirtiness of the windows are described. The temperatures so obtained are compared with those calculated from pressure diagrams.
Date: March 1936
Creator: Brevoort, Maurice J.
Partner: UNT Libraries Government Documents Department
open access

Altitude-pressure tables based on the United States standard atmosphere

Description: This report is a revision of the altitude pressure tables of the United States standard atmosphere given in Technical Report No. 246 and the altitude range has been extended from 50,000 to 80,000 feet.
Date: 1936%
Creator: Brombacher, W. G.
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Aluminum-Alloy Rivets

Description: "The development of metal construction for aircraft has created a need for accurate and detailed information regarding the strength of riveted joints in aluminum-alloy structures. To obtain this information the National Bureau of Standards in cooperation with the National Advisory Committee for Aeronautics is investigating the strength of riveted joints in aluminum alloys. The strength of riveted joints may be influenced by the form of the head, the ratio of the rivet diameter to the sheet thic… more
Date: November 1936
Creator: Brueggeman, W. C.
Partner: UNT Libraries Government Documents Department
open access

Strength of Welded Aircraft Joints

Description: "This investigation is a continuation of work started in 1928 and described in NACA-TR-348 which shows that the insertion of gusset plates was the most satisfactory way of strengthening a joint. Additional tests of the present series show that joints of this type could be improved by cutting out the portion of the plate between the intersecting tubes. T and lattice joints in thin-walled tubing 1 1/2 by 0.020 inch have somewhat lower strengths than joints in tubing of greater wall thickness beca… more
Date: August 12, 1936
Creator: Brueggeman, W. C.
Partner: UNT Libraries Government Documents Department
open access

Sampling and Examination of Mine Gases and Natural Gas: A Revision of Bulletin 42

Description: Revision of a report by the U.S. Bureau of Mines which described experiments performed in Pittsburgh, Pennsylvania to study mine gases. According to the foreword: "Much of the material is reprinted on the following pages in its original form, and changes have been made only where manifestly necessary. Laboratory methods have been brought up to date. Some types of apparatus described in Bulletin 42 have now become obsolete and newer designs are described instead" (p. 1).
Date: 1936
Creator: Burrell, George A. & Seibert, Frank M.
Partner: UNT Libraries Government Documents Department
open access

Concentration of Copper Ores in North America

Description: From Introduction: "This bulletin summarizes and discusses copper-concentrator methods, results, and costs from 1929 to 1931 and includes an account of trends and developments in the industry."
Date: 1936
Creator: Chapman, Thomas G.
Partner: UNT Libraries Government Documents Department
open access

Aircraft Accidents: Methods of Analysis

Description: This report is a revision of NACA-TR-357. It was prepared by the Committee on Aircraft Accidents. The purpose of this report is to provide a basis for the classification and comparison of aircraft accidents, both civil and military.
Date: June 22, 1936
Creator: Committee on Aircraft Accidents
Partner: UNT Libraries Government Documents Department
open access

Geology of the Coastal Plain of South Carolina

Description: From abstract: The Coastal Plain of South Carolina extends from the Atlantic Ocean inland a distance ranging from 120 to 150 miles to the Fall Line, where it adjoins the Piedmont province. It includes an area of more than 20,000 square miles, or nearly two-thirds of the State, whose total area is 30,981 square miles, of which 494 square miles is water. The geographic divisions of the Coastal Plain are the marine coastal terraces, or "low country", which stand less than 270 feet above sea level,… more
Date: 1936
Creator: Cooke, C. Wythe
Partner: UNT Libraries Government Documents Department
open access

Microscopic Structure and Concentratability of the Important Iron Ores of the United States

Description: Outline of Problem: "This paper covers a survey of 19 ores collected from seven of the more important iron-ore districts of the United States and is a contribution by the ore-dressing section of the United States Bureau of Mines to general research program on iron and steel being conducted by the Bureau."
Date: 1936
Creator: Cooke, S. R. B.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen