Search Results

open access

Performance Criteria for Solar Heating and Cooling Systems in Residential Buildings

Description: Report issued by the National Bureau of Standards over solar heating and cooling systems in residential buildings. The performance criteria for solar systems are discussed. This report includes illustrations.
Date: September 1982
Creator: United States. Bureau of Standards.
Partner: UNT Libraries Government Documents Department
open access

The Mechanics of Pneumatic Tires

Description: From Abstract: "This treatise is an attempt to provide a rational descriptive and analytical basis for tire mechanics. Chapters of this book are contributed by active research workers in the fields of rubber and textile properties, friction, material properties, tire stress problems, tire design and construction, vehicle skid and handling, and tire mechanical properties."
Date: November 1971
Creator: Clark, Samuel K.
Partner: UNT Libraries Government Documents Department
open access

Thermocouple Reference Tables Based on the IPTS-68

Description: From Abstract: "Revised reference data for thermocouples have been generated in a cooperative program between groups of the National Bureau of Standards in Boulder and Gaithersburg.This Monograph contains tables, analytic expressions, various approximations, and explanatory text.
Date: March 1974
Creator: Powell, Robert L.; Hall, William J.; Hyink, Clyde H., Jr.; Sparks, Larry L.; Burns, George W.; Scroger, Margaret G. et al.
Partner: UNT Libraries Government Documents Department
open access

BOLOVAC Systems for Measuring Electrical Quantities From 0.5 MHz Through Microwaves

Description: From Introduction: "This paper describes in some detail how Bolovac works, when its structural components are, what are the methods and steps of the procedure in its various major applications, and reasons for its advantages. The emphasis is on applications. Present status at the National Bureau of Standards relating to fabricating the most important component of the Bolovac-the bolometric disk-is briefly pointed out."
Date: January 1972
Creator: Selby, Myron C.
Partner: UNT Libraries Government Documents Department
open access

The Measurement of Lumped Parameter Impedance: A Metrology Guide

Description: Scope of the Guide: "This guide is not all-inclusive of the subject of impedance measurement and the reader should understand at the outset what he can or cannot expect to find. To help in establishing the bounds of subject matter included, consider the ideal impedance-measuring instrument as having the following the characteristics and capabilities: (1) unrestricted frequency range (2) unrestricted impedance range (3) unrestricted capabilities with respect to bias, ambience, applied power, etc. (4) error free (5) performs measurements instantaneously (6) zero acquisition cost (7) zero operating cost."
Date: June 1974
Creator: Jones, R. N. & Anson, W. J.
Partner: UNT Libraries Government Documents Department
open access

The Measurement of Noise Performance Factors: A Metrology Guide

Description: From Introduction: "The purpose of this guide is to describe, discuss, and analyze methods of measuring the average noise factor and average effective input noise temperature of an electronic transducer."
Date: June 1974
Creator: Arthur, M. G. & Anson, W. J.
Partner: UNT Libraries Government Documents Department
open access

Tables of Spectral-Line Intensities: Part 1, Arranged by Elements

Description: From Abstract: "Comparisons with other other intensity measurements in individual spectra indicate that the National Bureau of Standards spectral-line intensities may have average errors of 20 percent, but first of all they provide uniform quantitative values for the seventy chemical elements commonly determined by spectrochemists. These data are presented by element in part I, and all 39000 observed lines are given in order of wavelength in part II."
Date: May 1975
Creator: Meggers, William F.; Corliss, Charles H. & Scribner, Bourdon F.
Partner: UNT Libraries Government Documents Department
open access

Computers, Health Records, and Citizen Rights

Description: Report issued by the Bureau of Standards over studies on the benefits of computerized record-keeping. Medical records were chosen for the studies, and they also focus on patient privacy and rights. This report includes tables, and illustrations.
Date: December 1976
Creator: Westin, Alan F.; Baker, Michael A.; Annas, George J.; Silberberg, Richard; Broder, Jamie; Isbell, Florence et al.
Partner: UNT Libraries Government Documents Department
open access

Calibration of Line Standards of Length and Measuring Tapes at the National Bureau of Standards

Description: From Abstract: "The methods used at the National Bureau of Standards in calibrating line standards of length and measuring tapes submitted for standardization are outlined. The equipment used is described briefly. There is a discussion of some considerations that should be given as to whether or not a standard should be submitted to the Bureau."
Date: May 20, 1960
Creator: Judson, Lewis V.
Partner: UNT Libraries Government Documents Department
open access

Automatic Measurement of Network Parameters: A Survey

Description: Report issued by the Bureau of Standards over a survey conducted on measurement methods of network parameters. As stated in the introduction, "this paper is concerned with the development of automatic methods of measuring basically the magnitudes and phase differences, or the complex ratio of two sinusoidal voltages, and applications of this capability to determining complex reflection coefficients and transmission coefficients and group delay times of electrical networks" (p. 1). This report includes tables, and illustrations.
Date: June 1976
Creator: Beatty, Robert William
Partner: UNT Libraries Government Documents Department
open access

Measurement Assurance Program - A Case Study: Length Measurements. Part 1. Long Gage Blocks (5 in to 20 in)

Description: From Abstract and Introduction: "This paper is, in essence, a report on the extension of the techniques first suggested in NBS Monograph 103 "Realistic Uncertainties and the Mass Measurement Process" to the area of length measurement. This paper covers the progress to date on the long gage blocks (from 5 to 20 in the length). The purpose of this purpose is to verify the closure between the "old" process and the "new" process, and to describe the present "points of departure" upon which some of the current assigned length values are based."
Date: November 1975
Creator: Pontius, Paul E.
Partner: UNT Libraries Government Documents Department
open access

Stress Corrosion Cracking Control Measures

Description: From Abstract: "This publication attempts to diminish the incidence of stress corrosion failures by assembling the available practical measures to avoid or minimize the problem and present these measures in a form comprehensible to those persons responsible for the design, fabrication, and maintenance of new structures."
Date: June 1977
Creator: Brown, B. F.
Partner: UNT Libraries Government Documents Department
open access

Corrosion and Protection of Steel Piles in a Natural Seawater Environment

Description: From Introduction: "This paper describes some results of the first eight years of a fifteen year program in which a variety of coating and catholic protection systems are evaluated on their ability to protect steel piles in offshore conditions at Dam Neck, Virginia. It includes a description of the methods used in the evaluation and the results found on these systems."
Date: June 1977
Creator: Escalante, E.; Iverson, W. P.; Gerhold, W. F.; Sanderson, B. T. & Alumbaugh, R. L.
Partner: UNT Libraries Government Documents Department
open access

Tables of Electron Radial Functions and Tangents of Phase Shifts for Light Nuclei (Z=1 through 10)

Description: From Introduction: "This Monograph, supplemented by ORNL-3207 [9], should eliminate completely the need for use of approximate formulas (e.g. those of Kotani and Ross [10]). The formulation of the problem has been summarized in sec. II. This is followed in sec. III by a discussion of the methods used in numerical calculations. Sec. IV contains a detailed explanation to facilitate the use of present tables."
Date: August 6, 1964
Creator: Bhalla, C. P.
Partner: UNT Libraries Government Documents Department
open access

Corrosion of Steel Pilings in Soils

Description: From Introduction: "In this paper are presented the results obtained to date from the inspections of steel pilings. The investigation will be continued by additional inspections of pilings in other parts if the country in order to cover a wider range of soil environments."
Date: October 24, 1962
Creator: Romanoff, Melvin
Partner: UNT Libraries Government Documents Department
open access

An Engineering Method for Calculating Protection Afforded by Structures Against Fallout Radiation

Description: From Introduction: "The purpose of the paper is to discuss the assumptions and the reasoning by which the calculations described in the Engineering Manual were derived from the data in [1]. The relevant curves from [1] are given in Appendix A and the technical charts from the Engineering Manual are given in appendix B."
Date: July 2, 1964
Creator: Eisenhauer, Charles
Partner: UNT Libraries Government Documents Department
open access

Effects of Thermal Shrinkage on Built-up Roofing

Description: From Introduction: "The object of this research was to identify and study some of the factors involved in premature failures and to relate the pertinent factors to roof performance."
Date: March 4, 1965
Creator: Cullen, William C.
Partner: UNT Libraries Government Documents Department
open access

Heat Treatment and Properties of Iron and Steel

Description: From Abstract: "This Monograph is a revision of the previous NBS Monograph 18. Its purpose is to provide an understanding of the heat treatment of iron and steels, principally to those unacquainted with this subject. The basic principles involved in the heat treatment of these materials are presented in simple form." From Introduction: "This Monograph has been prepared to answer such inquires and to give in simplified form a working knowledge of the basic theoretical and practical principles involved in the heat treatment of iron and steel."
Date: November 1, 1966
Creator: Digges, Thomas G.; Rosenberg, Samuel J. & Geil, Glenn W.
Partner: UNT Libraries Government Documents Department
open access

Ideal Gas Thermodynamic Functions and Isotope Exchange Functions for the Diatomic Hydrides, Deuterides, and Tritides

Description: From Abstract: "This Monograph contains a consistent set of tables of thermodynamic properties of a large number of diatomic hydrides, deuterides, and tritides, for the ideal gas state at one atmosphere pressure. In addition to the thermodynamic properties of the molecular gases, the tables also include thermodynamic properties for chemical reactions involving the isotopic exchange of hydrogen."
Date: May 29, 1961
Creator: Haar, Lester; Friedman, Abraham S. & Beckett, Charles W.
Partner: UNT Libraries Government Documents Department
open access

Electromagnetic Boundary-Value Problems Based Upon a Modification of Residue Calculus and Function Theoretic Techniques

Description: From Introduction: "The first part of this monograph is concerned with the analysis of closed region wave-guide junction problems. This allows simplification of the techniques to be used since no branch cuts are involved in the spectral representation of the fields. However, the analysis can be extended to open region problems in a logical manner. This is the subject of the second part of this monograph."
Date: June 1979
Creator: Montgomerey, James Patrick & Chang, David C.
Partner: UNT Libraries Government Documents Department
open access

Ionospheric Radio Propagation

Description: From Preface: "The purpose of this book is to replace, in part, a previous publication of the National Bureau of Standards (Circular 462) with the same title. The scope of the present work has therefore been broadened to include aspects of ionospheric radio propagation which were not treated in earlier publication."
Date: April 1, 1965
Creator: Davies, Kenneth
Partner: UNT Libraries Government Documents Department
open access

Creep and Drying Shrinkage of Lightweight and Normal-Weight Concretes

Description: From Scope of Investigation: "The work reported here is part of a continuing program concerning the long-term volume changes in concretes made from lightweight and normal-weight aggregates. The creep, drying-shrinkage, and strength data presented are for concretes made with 24 expanded shale lightweight aggregates and 5 natural, normal-weight aggregates. These aggregates were from widely separated geographical locations and were to be representative samples of aggregates being used in the production of structural concretes."
Date: March 4, 1964
Creator: Reichard, T. W.
Partner: UNT Libraries Government Documents Department
open access

Mercury Barometers and Manometers

Description: From Abstract: "Sources of error in measuring pressures are described in considerable detail, particularly for portable instruments including scale, temperature , gravity, capillarity, vacuum errors and return gas column. Methods of minimizing those errors and of making the corrections, including extensive tables, are presented."
Date: May 20, 1960
Creator: Brombacher, W. G.; Johnson, D. P. & Cross, J. L.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen