1,263 Matching Results

Search Results

Results: 1 - 24 next
open access

Analysis of Wind-Tunnel Stability and Control Tests in Terms of Flying Qualities in Full-Scale Airplanes

Description: From Summary: "The analysis of results of wind-tunnel stability and control tests of powered airplane models in terms of the flying qualities of full-scale airplanes is advocated. In order to indicate the topics upon which comments are considered desirable in the report of a wind-tunnel stability and control investigation and to demonstrate the nature of the suggested analysis, the present NACA flying-qualities requirements are discussed in relation to wind-tunnel tests. General procedures for … more
Date: October 1943
Creator: Kayten, Gerald G.
Partner: UNT Libraries Government Documents Department
open access

Compressibility and Heating Effects on Pressure Loss and Cooling of a Baffled Cylinder Barrel

Description: Report presenting testing to obtain experimental confirmation of the effect of air compressibility on cooling and pressure loss of a baffled cylinder barrel and to evaluate various methods of analysis. Testing occurred over a wide range of air flows and density altitudes.
Date: July 1944
Creator: Goldstein, Arthur W. & Ellerbrock, Herman H., Jr.
Partner: UNT Libraries Government Documents Department
open access

The Knock-Limited Performance of S Reference Fuel Plus 2 Milliliters of Triethylthallium Per Gallon

Description: Report discusses the results of testing of thallium as an antiknock agent in an internal-combustion engine. From Introduction: "On a weight basis, the thallium vapors were found to have several times the antiknock value of tetraethyl lead, which was added to the fuel. The amount of thallium vapor necessary to raise the antiknock properties of a gasoline up to exact equivalence with a benzol-gasoline mixture was determined in these engine tests."
Date: November 1945
Creator: Meyer, Carl L.
Partner: UNT Libraries Government Documents Department
open access

A method for studying the hunting oscillations of and airplane with a simple type of automatic control

Description: Report presenting a method for predicting the amplitude and frequency, under certain simplifying conditions, of the hunting oscillations of an automatically controlled aircraft with lag in the control system or in response of the aircraft to the controls. Formulas are given expressing the response to a variation of signal in terms of response to a unit signal.
Date: May 1944
Creator: Jones, Robert T.
Partner: UNT Libraries Government Documents Department
open access

Intercooler cooling-air weight flow and pressure drop for minimum drag loss

Description: Report presenting an analysis of the power losses in airplane flight of cross-flow plate and tubular intercoolers to determine the cooling-air weight flow and pressure drop that give minimum total power loss for any given cooling effectiveness. The investigation covers a range of flight conditions of altitude, airspeed, lift-drag ratio, supercharger-pressure ratio, and adiabatic efficiency.
Date: April 1944
Creator: Reuter, J. George & Valerino, Michael F.
Partner: UNT Libraries Government Documents Department
open access

Correlation of exhaust-valve temperatures with engine operating conditions and valve design

Description: Report presenting a theory regarding engine-cooling variables from a previous report, which was used as a basis for the development of a semi-empirical equation to correlate exhaust-valve temperature with engine conditions. Results regarding the determination of constants, influences of operating variables on mean effective gas temperatures, thermal-resistance factor, and accuracy of correlating equation are provided.
Date: October 1945
Creator: Zipkin, M. A. & Sanders, J. C.
Partner: UNT Libraries Government Documents Department
open access

Experiments on Drag of Revolving Disks, Cylinders and Streamline Rods at High Speeds

Description: Report presenting an experimental investigation concerned primarily with the extension of test data on the drag of revolving disks, cylinders, and streamline rods to high Mach numbers and Reynolds numbers. The tests generally confirm earlier theories and add in some new results. One of the primary findings of interest is that skin friction does not depend on Mach number.
Date: June 1944
Creator: Theodorsen, Theodore & Regier, Arthur
Partner: UNT Libraries Government Documents Department
open access

The effect of compressibility on two-dimensional tunnel-wall interference for a symmetrical airfoil

Description: Summary: The effective change in the velocity of flow past a wing section, caused by the presence of wind-tunnel walls, is known for potential flow. This theory is extended by investigation of the two-dimensional compressible flow past a thin Rankine Oval. It is shown that for a symmetrical section at zero angle of attack the velocity increment due to the tunnel walls in the incompressible case must be multiplied by the factor 1/1-M^2 to take account of compressibility effects. The Mach numb… more
Date: May 1943
Creator: Nitzberg, Gerald E.
Partner: UNT Libraries Government Documents Department
open access

A method for determining the rate of heat transfer from a wing or streamline body

Description: From Summary: "A method for calculating the rate of heat transfer from the surface of an airfoil or streamline body is presented. A comparison with the results of an experimental investigation indicates that the accuracy of the method is good. This method may be used to calculate the heat supply necessary for heat de-icing or in ascertaining the heat loss from the fuselage of an aircraft operating at great altitude, for example."
Date: December 1942
Creator: Frick, Charles W., Jr. & McCullough, George B.
Partner: UNT Libraries Government Documents Department
open access

Emergency Measures for Increasing the Range of Fighter Airplanes

Description: "An analysis was made to show the relative effectiveness of streamline external fuel tanks, a fuel tank in the form of a wing mounted in a biplane position, and auxiliary wing panels attached at the wing tips to increase the span as temporary means for increasing the range of a fighter-type airplane. Figures and charts for the various devices considered show the results of calculations of range, duration of flight, and take-off distance for both land-base and carrier operation. The results indi… more
Date: May 1943
Creator: Jones, Robert T. & Wetmore, Joseph W.
Partner: UNT Libraries Government Documents Department
open access

Review of Flight Tests of NACA C and D Cowlings on the XP-42 Airplane

Description: Report presenting the results of flight tests of the performance and cooling characteristics of three NACA D cowlings and of a conventional NACA C cowling on the XP-42 airplane. The D cowling is, generally, characterized by the use of an annular inlet and diffuser section for the engine-cooling air. An increase in maximum speed was noted in the XP-42 airplane due to the change from a C cowling to a D cowling.
Date: April 1943
Creator: Johnston, J. Ford
Partner: UNT Libraries Government Documents Department
open access

Fuel-Evaporation Loss as Determined by the Change in the Specific Gravity of the Fuel in an Aircraft Fuel Tank

Description: Report discusses the results of an investigation to determine the feasibility of using the change in the specific gravity of fuels in aircraft fuel tanks to measure fuel-vaporization loss. Six fuels were tested via fuel-distillation tests and simulated-flight tests. An equation based on the specific gravity of the fuel is also described.
Date: May 1945
Creator: Stone, Charles S. & Kramer, Walter E.
Partner: UNT Libraries Government Documents Department
open access

Fluid de-icing tests on a Chandler-Evans 1900 CPB-3 carburetor mounted on a Pratt & Whitney R-1830-C4 intermediate rear engine section

Description: Report presenting an investigation of the icing and de-icing characteristics of a Pratt & Whitney R-1830 engine induction system. The current report covers a program to determine the most effective rate and method of injection of de-icing fluid to remove a heavy ice formation from the induction system. Results regarding the flow rates, recovery times, de-icing portions of the runs, and ice formation characteristics are provided.
Date: October 1944
Creator: Galvin, Herman B. & Essex, Henry A.
Partner: UNT Libraries Government Documents Department
open access

Flight tests of thermal ice-prevention equipment in the XB-24F airplane

Description: Report presenting performance tests of thermal ice-prevention equipment designed and installed in the XB-24F airplane in icing and non-icing conditions. The recorded temperature and air-flow data, and the calculated quantities of heat flow throughout the system are presented in tabular form.
Date: October 7, 1943
Creator: Neel, Carr B. & Jones, Alun R.
Partner: UNT Libraries Government Documents Department
open access

Flight Tests of Modifications to Improve the Aileron Control Characteristics of a North American XP-51 Airplane (AC No. 41-38)

Description: Investigations were undertaken to improve the ailerons of a P-51 fighter so as to obtain greater effectiveness without increasing the stick forces. Modifications consisted of increasing the deflection range of the aileron to 70 percent and changing the original concave section to a thick section with beveled trailing edge. Results of the modified ailerons showed an increase in effectiveness over the original aileron of 70 percent at low speed and 55 percent at high speeds.
Date: June 1942
Creator: White, M. D. & Hoover, Herbert H.
Partner: UNT Libraries Government Documents Department
open access

Ultraviolet spectrochemical analysis for aromatics in aircraft fuels

Description: Report presenting tests to verify and extend ultraviolet spectroscopic techniques for applications to the analysis of aviation fuels for their aromatic constituents. Results regarding photographic absorption spectra, spectrophotometric absorption spectra, and spectrophotometric analyses are provided.
Date: March 1945
Creator: Cleaves, Alden P.
Partner: UNT Libraries Government Documents Department
open access

On the plane potential flow past a symmetrical lattice of arbitrary airfoils

Description: Report presenting a theoretical investigation of the two-dimensional, incompressible potential flow past a symmetrical lattice of airfoils of arbitrary shape. Expressions are given for evaluation of the velocity and pressure distribution at the airfoil boundary.
Date: January 1944
Creator: Garrick, I. E.
Partner: UNT Libraries Government Documents Department
open access

Visual Studies of Cylinder Lubrication [Part] 1: The Lubrication of the Piston Skirt

Description: Report describes the lubrication characteristics of an aircraft-type piston as visually studied in a V-type engine with a glass cylinder. Information about the movement of the piston, the piston rings, and the oil-control rings and their effect on lubrication is included.
Date: September 1945
Creator: Shaw, Milton C. & Nussdorfer, Theodore
Partner: UNT Libraries Government Documents Department
open access

Tests of a Thermal Ice-Prevention System for a Wing Leading-Edge Landing-Light Installation

Description: Report discussing the creation of a thermal ice-prevention system of a bomber-type airplane to provide protection against ice and fog formations on the transparent fairing over the landing light in the wing leading edge. A comparison between the design performance and actual performance showed that the outer-surface heat-transfer coefficient was correctly predicted, but the inner-surface heat-transfer coefficient was four times as large, leading to failure of the plastic fairing.
Date: December 1944
Creator: Hillendahl, Wesley H.
Partner: UNT Libraries Government Documents Department
open access

Critical combinations of shear and transverse direct stress for an infinitely long flat plate with edges elastically restrained against rotation

Description: Report presenting an exact solution and a closely concurring approximate energy solution for the buckling of an infinitely long flat plate under combined shear and transverse direct stress with edges elastically restrained against rotation. An appreciable fraction of the critical stress in pure shear may be applied to the plate without any reduction in the transverse compressive stress necessary to produce buckling.
Date: January 1945
Creator: Batdorf, S. B. & Houbolt, John C.
Partner: UNT Libraries Government Documents Department
open access

NACA Mach number indicator for use in high-speed tunnels

Description: Report presenting a description of a device for indicating stream Mach number in a high-speed tunnel. It consists of a mechanism for determining the pressure ratio that Mach number is a function of. The instrument is in service in the 8-foot high-speed tunnel and its accuracy has been found adequate for wind-tunnel requirements.
Date: July 1943
Creator: Smith, Norman F.
Partner: UNT Libraries Government Documents Department
open access

On a New Method for Calculating the Potential Flow Past a Body of Revolution

Description: Report presenting a new method for obtaining the velocity potential of the flow about a solid of revolution moving uniformly in the direction of its axis of symmetry in a fluid otherwise at rest. The method is based essentially on the fact that the form of the differential equation for the velocity potential is invariant with regard to conformal transformations in a meridian plane. The general results are applied to a body of revolution obtained by revolving a symmetrical Joukowski profile abou… more
Date: July 1942
Creator: Kaplan, Carl
Partner: UNT Libraries Government Documents Department
open access

The development and application of high-critical-speed nose inlets

Description: From Summary: "An analysis of the nose-inlet shapes developed in previous investigations to represent the optimum from the standpoint of critical speed has shown that marked similarity exists between the nondimensional profiles of inlets which have widely different proportions and critical speeds. With the nondimensional similarity of such profiles established, the large differences in the critical speeds of these nose inlets must be a function of their proportions. An investigation was underta… more
Date: July 1945
Creator: Baals, Donald D.; Smith, Norman F. & Wright, John B.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen