160 Matching Results

Search Results

Results: 1 - 24 next
open access

Experimental Evaluation of Swirl Can Elements for Hydrogen Fuel Combustor

Description: Memorandum presenting a study of the performance of swirl-can combustor elements for an experimental short-length turbojet combustor utilizing hydrogen fuel at high-altitude operating conditions. Fuel was injected into each element through a tangential, sonic orifice that created a swirling fuel-air mixture within each element. Results regarding combustor blowout, combustion efficiency, outlet temperature distribution, and preliminary performance of multielement combustor are provided.
Date: May 13, 1957
Creator: Rayle, Warren D.; Jones, Robert E. & Friedman, Robert
Partner: UNT Libraries Government Documents Department
open access

Ditching investigation of a 1/25-scale model of a 255,000-pound transport airplane

Description: "An investigation was made of a 1/25-scale dynamically similar model of a 255,000-pound transport airplane in order to study its behavior when ditched. The model was free-launched from the Langley tank no. 2 monorail carriage into calm water. Various landing attitudes, flap settings, speeds, and configurations were investigated" (p. 1).
Date: July 13, 1955
Creator: Windham, John O.
Partner: UNT Libraries Government Documents Department
open access

The effect of blunt-trailing-edge elevons on the longitudinal and lateral handling qualities of the semitailless airplane

Description: Report presenting a flight program using the Northrop X-4 semitailless airplane to investigate the effect on the longitudinal and lateral stability and control of thickened elevons with trailing-edge thickness one-half the control-hinge-station thickness. The investigation consisted of speed runs, wind-up turns, abrupt rudder-fixed rolls, and longitudinal pulses between a range of Mach numbers.
Date: January 13, 1955
Creator: Saltzman, Edwin J.
Partner: UNT Libraries Government Documents Department
open access

Stabilization of 50-Percent Magnesium - JP-4 Slurries With Some Aluminum Soaps of C(Sub 8) Acids

Description: Report presenting an exploratory investigation of three aluminum disoaps of C(sub 8) acids to determine the gelling properties and stabilizing ability in slurries of 50 percent magnesium power and JP-4 fuel. All of the soaps were found to gel the slurries satisfactorily and to exhibit adequate reproducibility of gel properties. Results regarding the soap behaviors, effects of temperature, viscosity, and formation of the gel structures are provided.
Date: May 13, 1954
Creator: Caves, Robert M.
Partner: UNT Libraries Government Documents Department
open access

Free-Spinning-Tunnel Investigation of a 1/28-Scale Model of the North American FJ-4 Airplane

Description: Report on an investigation to determine the erect and inverted spin and recovery characteristics of a model of the North American FJ-4 airplane. The testing found that either a flat-type of steep-type spin may be obtained when the airplane is spinning erect. The optimum recovery technique from inverted spins was full rudder reversal with simultaneous movement of the ailerons to full with the stick maintained full forward.
Date: January 13, 1958
Creator: Healy, Frederick M.
Partner: UNT Libraries Government Documents Department
open access

Effectiveness of Thermal-Pneumatic Airfoil-Ice-Protection System

Description: From Summary: "Icing and drag investigations were conducted in the NACA Lewis icing research tunnel employing a combination thermal-pneumatic de-icer mounted on a 42-inch-chord NACA 0018 airfoil. The de-icer consisted of a 3-inch-wide electrically heated strip symmetrically located about the leading edge with inflatable tubes on the upper and lower airfoil surfaces aft of the heated area. The entire de-icer extended to approximately 25 percent of chord. A maximum power density of 9.25 watts per… more
Date: April 13, 1951
Creator: Gowan, William H., Jr. & Mulholland, Donald R.
Partner: UNT Libraries Government Documents Department
open access

Effects of Free-Stream Reynolds Number, Engine Installation, and Model Scale on Stability Characteristics of a Translating-Spike Inlet at Mach 2.0

Description: Memorandum presenting the effect of free-stream Reynolds number, engine installation, and model scale on inlet stability limits and on the amplitude and frequency of buzz. The data were taken at a free-stream Mach number of 2.0 and angles of attack from 0 to 6 degrees. Results regarding free-stream Reynolds number effect, model scale, and effect of engine on stability are provided.
Date: November 13, 1957
Creator: Musial, Norman T. & Bowditch, David
Partner: UNT Libraries Government Documents Department
open access

Effect of Design Changes of Operating Conditions on Combustion and Operational Performance of a 28-Inch Diameter Ram-Jet Engine

Description: Report presenting an investigation of the altitude performance of a 28-inch diameter ram-jet engine using a direct-connect system in an altitude test chamber. The majority of the investigation occurred at Mach number 2 at altitudes above the tropopause (250 degrees Fahrenheit inlet temperature). Various design configurations were explored and runs were made with different types of fuel.
Date: February 13, 1952
Creator: Shillito, T. B. & Nakanishi, Shigeo
Partner: UNT Libraries Government Documents Department
open access

A Wind-Tunnel Investigation of the Stability of the Antisubmarine Rocket Mk 1 Mod 0

Description: Report discussing an investigation to determine the cause and provide a fix for the instability in flight of the antisubmarine rocket Mk 1 Mod 0. The Magnus effects and their nonlinear variation with angle of attack were found to affect the stability, so reducing the Magnus effects should reduce instability in the missiles. The greatest reduction of Magnus effects was found through a combination of nose-ring spoiler and the original direction of the propeller rotation, but the nose ring increas… more
Date: November 13, 1952
Creator: Lichtenstein, Jacob H. & Williams, James L.
Partner: UNT Libraries Government Documents Department
open access

Experimental Investigation of Extreme Internal Flow Turning at the Cowl Lip of an Axisymetric Inlet at a Mach Number of 2.95

Description: Memorandum presenting an experimental investigation of the pressure-recovery performance of a fixed-geometry, two-cone, two-drag inlet at Mach number 2.95. Low drag was achieved by use of an internally cylindrical cowl with rapid flow turning that was within 4 degrees of the wedge angle for shock detachment. Results regarding the inlet performance and evaluation of inlet performance are provided.
Date: May 13, 1958
Creator: Weston, Kenneth C. & Kowalski, Kenneth L.
Partner: UNT Libraries Government Documents Department
open access

The Origin and Distribution of Supsonic Store Interference From Measurement of Individual Forces on Several Wing-Fuselage-Store Configurations 5 - Swept-Wing Heavy-Bomber Configuration With Large Store (Nacelle). Mach Number, 2.01

Description: Memorandum presenting a supersonic wind-tunnel investigation of store interference performed in the 4- by 4-foot supersonic pressure tunnel at a Mach number of 2.01 in which separate forces on a store and a swept-wing-fuselage combination were measured. The report presents data on a configuration which simulated a heavy-bomber airplane with a large external store.
Date: February 13, 1956
Creator: Carlson, Harry W. & Geier, Douglas J.
Partner: UNT Libraries Government Documents Department
open access

Free-Flight Aerodynamic-Heating Data at Mach Numbers Up to 10.9 on a Flat-Faced Cylinder

Description: Memorandum presenting a five-stage rocket-propelled model flown up to a Mach number of 10.9 and a corresponding free-stream Reynolds number of 6.57 x 10(exp 6) based on nose diameter. Temperatures were measured at 16 stations on the inside of a flat-faced cylinder made of copper. Results regarding the flight test, wall temperatures, heat-transfer data, measurement repeatibility and effects of angle of attack, comparison of measured and theoretical stagnation-point heating rates, and measured an… more
Date: January 13, 1958
Creator: Bland, William M., Jr.; Swanson, Andrew G. & Kolenkiewicz, Ronald
Partner: UNT Libraries Government Documents Department
open access

Theoretical Investigation of the Performance of Proportional Navigation Guidance Systems-Effect of Method of Positioning the Radar Antenna on the Speed of Response

Description: Memorandum presenting a linear theoretical analysis of the performance of three proportional navigation guidance systems installed in a given supersonic, variable-incidence, boost-glide, antiaircraft missile at Mach numbers of 2.7 and 1.3. It is shown that, with the antenna stabilized in space, the effect of component lags on the response is small, so that the speed of response is small, so that the speed of response can be made to approach closely that of the airframe alone.
Date: August 13, 1952
Creator: Abramovitz, Marvin
Partner: UNT Libraries Government Documents Department
open access

Investigation of an Underslung Scoop Inlet at Mach Numbers to 1.99

Description: Memorandum presenting the performance of a scoop-type inlet on the bottom of a body of revolution at several Mach numbers and angles of attack. The investigation included a study of the effects of altering the approach surface ahead of the inlet, extending the boundary-layer splitter plate, and bleeding air at the throat and exit of the diffuser.
Date: March 13, 1957
Creator: Weinstein, Maynard I.; Vargo, Donald J. & McKevitt, Frank
Partner: UNT Libraries Government Documents Department
open access

Drag at Model Trim Lift of a 1/15-Scale Convair B-58 Supersonic Bomber

Description: Report presenting an investigation using rocket-propelled model of the Convair B-58 supersonic bomber. Drag at trim lift was obtained for a range of Mach and Reynolds numbers and is compared to data from several other testing facilities.
Date: July 13, 1956
Creator: Hopko, Russell N. & Kinard, William H.
Partner: UNT Libraries Government Documents Department
open access

Investigation of shock diffusers at Mach number 1.85 3: multiple-shock and curved-contour projecting cones

Description: Report presenting total-pressure recoveries obtained with four-cone inlet combinations at Mach number 1.85. The configurations tested included a cone designed to produce three oblique shocks ahead of the diffuser inlet combined with two other inlets, a cone generated by a parabolic arc in combination with two other inlets, a cone-inlet combination designed to produce an isentropic entrance flow at 0 degrees angle of attack, and a 30 degree single-shock cone combined with a perforated inlet sect… more
Date: August 13, 1947
Creator: Moeckel, W. E. & Connors, J. F.
Partner: UNT Libraries Government Documents Department
open access

An investigation of the effect of tip shape on the low-speed aerodynamic characteristics of large-scale swept wings

Description: Report presenting an investigation of the effect of tip shape on the aerodynamic characteristics of large-scale 45 degrees swept-forward and 45 degrees swept-back wings. The results show that none of the variations of tip shape investigated nor the addition of bodies of revolution at the tips produced major changes in the characteristics of the swept wings.
Date: November 13, 1947
Creator: Walling, Walter C.
Partner: UNT Libraries Government Documents Department
open access

Free-Flight Investigation of Fullspan, 0.2 Chord Plain Ailerons at High Subsonic, Transonic, and Supersonic Speeds to Determine Some Effects of Wing Sweepback, Taper, Aspect Ratio, and Section-Thickness Ratio

Description: Report presenting an aerodynamic-control-effectiveness investigation using free-flight rocket-propelled RM-5 test vehicles at high subsonic, transonic, and supersonic speeds. Results regarding aileron control characteristics and drag measurements are provided.
Date: August 13, 1947
Creator: Sandahl, Carl A.
Partner: UNT Libraries Government Documents Department
open access

Theoretical analysis of the performance of a supersonic ducted rocket

Description: Report presenting calculated performance characteristics of a ducted rocket with gasoline and liquid oxygen as the fuel mixture and with a mass flow of 1 slug per second. Evaluations of net thrust, frontal area, thrust per unit frontal area, and specific fuel consumption are given for all of the flight conditions under which it might operate.
Date: February 13, 1948
Creator: Hensley, Reece V.
Partner: UNT Libraries Government Documents Department
open access

Effects of Obstructions in Compressor Inlet on Blade Vibration in 10-Stage Axial-Flow Compressor

Description: Report presenting a blade-vibration survey that was conducted during normal operation of a 10-stage axial-flow compressor powered by part of a complete jet engine. Strain-gage records were obtained from all stages during acceleration, deceleration, and constant-speed runs. Results regarding the inlet disturbances and damping characteristics are provided.
Date: February 13, 1950
Creator: Meyer, André J., Jr.; Calvert, Howard F. & Morse, C. Robert
Partner: UNT Libraries Government Documents Department
open access

Preliminary investigation of porous walls as a means of reducing tunnel boundary effects at low-supersonic Mach numbers

Description: Report presenting the use of porous-walled tunnels at supersonic Mach numbers as a means of avoiding reflection of a stream disturbance extending to the walls. Results from analysis and an experiment with a 4 degree wedge at a Mach number of 1.2 are provided.
Date: September 13, 1950
Creator: Nelson, William J. & Bloetscher, Frederick
Partner: UNT Libraries Government Documents Department
open access

Drag of a Wing-Body Configuration Consisting of a Swept-Forward Tapered Wing Mounted on a Body of Fineness Ratio 12 Measured During Free Fall at Transonic Speeds

Description: Report discussing an investigation to determine the drag of a configuration with a body of fitness ratio 12 with stabilizing tail surfaces and a 12-percent-thick 30-degree swept-forward wing using the free-fall method. The drag oft he wing and the total drag were measured separately and compared. The swept-forward wing was found to greatly increase the effect of drag on the body-tail combination.
Date: March 13, 1947
Creator: Thompson, Jim Rogers & Mathews, Charles W.
Partner: UNT Libraries Government Documents Department
open access

Flight Characteristics at Low Speed of Delta-Wing Models

Description: Report presenting an investigation to obtain a survey of the flying characteristics at low speeds of models with low-aspect-ratio delta wings. Four models with triangular plan-form sweptback wings and five models with the tips cut off to give taper ratios were tested. Results regarding the stability and control characteristics of each of the models is provided.
Date: January 13, 1948
Creator: McKinney, Marion O., Jr. & Drake, Hubert M.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen