16 Matching Results

Search Results

Results: 1 - 16
open access

Creep Strength of Stabilized Wrought-Aluminum Alloys

Description: Rohn-type equipment has been mounted on rubber blocks, for the purpose of damping the vibrations of the ground and of rendering the plastic yielding of the test bars less subject to outside interferences. New equipment also included three shockproof creep-testing machines with the Martens mirror instruments for recording the strain curve of the fatigue-tested specimens.
Date: November 1940
Creator: Müller, W.
Partner: UNT Libraries Government Documents Department
open access

The Effect of Initial Displacement of the Center Support on the Buckling of a Column Continuous Over Three Supports

Description: Report presenting an investigation of a long column continuous over three supports to determine its critical load when the center support was given varying amounts of initial displacement. During each test, the middle support was hinged so as to be free to move parallel to the column axis during buckling. The critical loads predicted from load-deflection readings were different for the upper and lower spans.
Date: November 1940
Creator: Lundquist, Eugene E. & Kotanchik, Joseph N.
Partner: UNT Libraries Government Documents Department
open access

The Effect of Initial Displacement of the Center Support on the Buckling of a Column Continuous Over Three Supports

Description: Report presenting a test of a long column continuous over three supports to determine its critical load when the center support was given varying amounts of initial displacement. During each test, the middle support was hinged so as to be free to move parallel to the column axis during buckling.
Date: November 1940
Creator: Lunquist, Eugene E. & Kotanchik, Joseph N.
Partner: UNT Libraries Government Documents Department
open access

A Flight Investigation of Exhaust-Heat De-Icing

Description: The National Advisory Committee for Aeronautics conducted exhaust-heat de-icing tests in flight to provide data needed in the application of this method. The capacity to extract heat from the exhaust gas for de-icing purposes, the quantity of heat required, and other factors were examined. The results indicate that a wing-heating system employing a spanwise exhaust tube within the leading edge of the wing removed 30 to 35 percent of the heat from exhaust gas entering the wing. Data are given fr… more
Date: November 1940
Creator: Rodert, Lewis A. & Jones, Alun R.
Partner: UNT Libraries Government Documents Department
open access

Flight Tests of Exhaust-Gas Jet Propulsion

Description: "Flight tests were conducted on the XP-41 airplane, equipped with a Pratt & Whitney R1830-19, 14-cylinder, air-cooled engine, to determine the increase in flight speed obtainable by the use of individual exhaust stacks directly rearwardly to obtain exhaust-gas thrust. Speed increases up to 13 miles per hour at 20,000 feet altitude were obtained using stacks having an exit area of 3.42 square inches for each cylinder. A slight increase in engine power and decrease in cylinder temperature at a gi… more
Date: November 1940
Creator: Pinkel, Benjamin & Turner, L. Richard
Partner: UNT Libraries Government Documents Department
open access

Flight Tests of Exhaust Gas Jet Propulsion, Special Report

Description: "Flight tests were conducted on the XP-41 airplane, equipped with a Pratt & Whitney R1830-19, 14-cylinder, air-cooled engine, to determine the increase in flight speed obtainable by the use of individual exhaust stacks directed rearwardly to obtain exhaust-gas thrust. Speed increases up to 18 miles per hour at 20,000 feet altitude were obtained using stacks having an exit area of 3.42 square inches for each cylinder. A slight increase in engine power and decrease in cylinder temperature at a gi… more
Date: November 1940
Creator: Pinkel, Benjamin & Turner, L. Richard
Partner: UNT Libraries Government Documents Department
open access

General Relationships Between the Various Systems of Reference Axes Employed in Flight Mechanics

Description: "The different possibilities of orientation of the systems of axes currently employed in flight mechanics are compiled and described. Of the three possible couplings between the wind and aircraft axes, the most suitable coupling is that in which the y axis is made the principal axis of rotation for one of the two coupling angles (angles of attack). In connection with this coupling, an experimental system of axes is introduced, whose axes x(sub e) and z(sub e) are situated in the plane of symmet… more
Date: November 1940
Creator: Rautenberg, H. J.
Partner: UNT Libraries Government Documents Department
open access

Heat-Transfer Tests of a Steel Cylinder Barrel With Aluminum Fins of Optimum Proportions

Description: Report presenting testing of a steel cylinder barrel with aluminum fins of the optimum spacing of 0.090 inch. The primary purpose is to determine the excellence of the thermal bonds between the aluminum fins and the aluminum base and between the aluminum base and the steel and to compare the heat transfer of the barrel with that of barrels with a fin space of 0.052 inch.
Date: November 1940
Creator: Ellerbrock, Herman H., Jr. & Mann, Alvin H.
Partner: UNT Libraries Government Documents Department
open access

Note on the Calculation of Boundary Layers

Description: The properties of the solutions of the hydrodynamic equations of viscous fluid by "boundary-layer omission" are discussed. A method is indicated for the numerical determination of the solution for a known initial profile u(x(sub o),y) and pressure distribution p(x) within the region.
Date: November 1940
Creator: Prandtl, L.
Partner: UNT Libraries Government Documents Department
open access

Stress Distribution in and Equivalent Width of Flanges of Wide, Thin-Wall Steel Beams

Description: "The use of different forms of wide-flange, thin-wall steel beams is becoming increasingly widespread. Part of the information necessary for a national design of such members is the knowledge of the stress distribution in and the equivalent width of the flanges of such beams. This problem is analyzed in this paper on the basis of the theory of plane stress. As a result, tables and curves are given from which the equivalent width of any given beam can be read directly for use in practical design… more
Date: November 1940
Creator: Winter, George
Partner: UNT Libraries Government Documents Department
open access

Structural Tests of a Stainless Steel Wing Panel by Hydrostatic Loading

Description: Note presenting testing of a simplified type of all-metal wing construction of 18-8, spot-welded except for skin attachment, by means of hydrostatic loading, the wing being proportioned to permit close representation of typical conditions by means of the waterhead. The results showed the possibility of eliminating almost all of the stiffeners from a stressed-skin wing, the possible reduction of weight in a lightly loaded wing and of substantial cost in the construction of any all-metal wing.
Date: November 1940
Creator: Upson, Ralph H.
Partner: UNT Libraries Government Documents Department
open access

Wind-tunnel investigation of an NACA 23012 airfoil with two sizes of balanced split flap

Description: Report presenting an investigation in the 7- by 10-foot wind tunnel of an NACA 23012 airfoil with a 15-percent-chord and a 25-percent-chord balanced split flap of Clark Y profile. The primary purpose was to determine the aerodynamic section characteristics of the airfoil as affected by the size, nose location, and deflection of the flap.
Date: November 1940
Creator: Harris, Thomas A. & Purser, Paul E.
Partner: UNT Libraries Government Documents Department
open access

Wind tunnel investigation of fuselage stability in yaw with various arrangements of fins

Description: "An investigation was made in the 7-by-10 foot wind tunnel to determine the effects of dorsal-type fins and various arrangements of fins on the aerodynamic characteristics of a streamline circular fuselage. Comparative plots of the aerodynamic characteristics of the fuselage alone and the fuselage with various fin arrangements are given to show their effects on coefficients of yawing moment, drag, and lateral force. Results are also given for one case in which a rear fin on a circular fuselage … more
Date: November 1940
Creator: Hoggard, H. Page, Jr.
Partner: UNT Libraries Government Documents Department
open access

Wind tunnel tests of air inlet and outlet openings on a streamline body

Description: Report presenting testing in the 8-foot high-speed wind tunnel to determine the effect on external drag and pressure distribution of air inlet openings on the stagnation point of a streamline body. The results showed that external drag of the body with suitably designed nose-inlet and tail-outlet openings over a wide range of rates of internal air flow was no higher than the drag of the streamline body. Specific results for the streamline body, nose-inlet openings, outlet openings, and inlet-ou… more
Date: November 1940
Creator: Becker, John V.
Partner: UNT Libraries Government Documents Department
open access

Wind tunnel tests of an NACA 23021 airfoil equipped with a slotted extensible and a plain extensible flap

Description: "An investigation has been made in the NACA 7- by 10-foot wind tunnel of a large chord NACA 23021 airfoil equipped with two arrangements of a completely extended 15 percent chord extensible flap. One of the flaps had a faired juncture, without a gap; the other was provided with a slot between the trailing edge of the airfoil and the nose of the flap. The results showed that the basic airfoil gave the lowest profile-drag coefficients over the low lift range, the airfoil with the plain extensible… more
Date: November 1940
Creator: Swanson, Robert S. & Harris, Thomas A.
Partner: UNT Libraries Government Documents Department
open access

A graphical method of determining pressure distribution in two-dimensional flow

Description: By a generalization of the Joukowski method, a procedure is developed for effecting localized modifications of airfoil shapes and for determining graphically the resultant changes in the pressure distribution. The application of the procedure to the determination of the pressure distribution over airfoils of original design is demonstrated. Formulas for the lift, the moment, and the aerodynamic center are also given.
Date: November 12, 1940
Creator: Jones, Robert T. & Cohen, Doris
Partner: UNT Libraries Government Documents Department
Back to Top of Screen