8 Matching Results

Search Results

Results: 1 - 8
open access

Model Study of the Outlet Structures for the Wappapello Dam

Description: This memorandum constitutes a final report of the study performed at the U. S. Waterways Experiment Station on a model of the outlet works for the Wappapello Dam The model was built undistorted to the linear scale ratio, model-to-prototype, of 1 to 25. The general purpose of the model study was to check the hydraulic characteristics of all elements in the design of the outlet works, and to develop means of correcting any uneconomic, unsafe, or undesirable conditions.
Date: August 15, 1938
Creator: Waterways Experiment Station (U.S.)
Partner: UNT Libraries Government Documents Department
open access

Fatigue Testing of Wing Beam by the Resonance Method

Description: "Preliminary fatigue tests on two aluminum-alloy wing-beam specimens subjected to reversed axial loading are described. The motion used consists in incorporating one or two reciprocating motors in a resonance system of which the specimen is the spring element. A description is given of the reciprocating motors, and of the method of assembling and adjusting the vibrating system" (p. 1).
Date: August 1938
Creator: Bleakney, William M.
Partner: UNT Libraries Government Documents Department
open access

Wind-tunnel investigation of rectangular and tapered NACA 23012 wings with plain ailerons and full-span split flaps

Description: An investigation was made to determine the aerodynamic properties of rectangular and tapered NACA 23012 wings with plain ailerons and a full-span split flap, the flap retracting ahead of the ailerons. Measurements were made of lift and drag and of pitching, rolling, yawing, and hinge moments for all conditions of full-span flaps neutral and deflected at different chord locations. The results of the tests showed that a 0.20c(sub w) full span split flap located at approximately the 0.75c(sub w) p… more
Date: August 1938
Creator: Wenzinger, Carl J. & Ames, Milton B., Jr.
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel of Three Lateral-Control Devices in Combination With a Full-Span Slotted Flap on an NACA 23012 Airfoil

Description: "A large-chord NACA 23012 airfoil was tested. The airfoil extended completely across the test section, and two-dimensional flow was approximated. The model was fitted with a full-span slotted flap having a chord 25.66 percent of the airfoil chord. The ailerons investigated extended over the entire span and each had a chord 10 percent of the airfoil chord" (p. 1).
Date: August 1938
Creator: Wenzinger, Carl J. & Bamber, Millard J.
Partner: UNT Libraries Government Documents Department
open access

Air Flow in the Boundary Layer of an Elliptic Cylinder

Description: From Introduction: "The present investigation was carried out for the purpose of supplementing the earlier work with information on the boundary layer under such conditions of air speed and turbulence that transition occurs and the layer is partly laminar and partly turbulent. In the work reported in reference 1, the air speed was about 12 feet per second, and it was assumed that the boundary layer remained in the laminar condition until after separation because the separation point remained fi… more
Date: August 6, 1938
Creator: Schubauer, G. B.
Partner: UNT Libraries Government Documents Department
open access

Effect of propeller slipstream on wing and tail

Description: The results of wind tunnel tests for the determination of the effect of a jet on the lift and downwash of a wing are presented in this report. In the first part, a jet without rotation and with constant velocity distribution is considered - the jet being produced by a specially designed fan. Three-component, pressure distribution, and downwash measurements were made and the results compared with existing theory. The effect of a propeller slipstream was investigated in the second part. In the tw… more
Date: August 1938
Creator: Stüper, J.
Partner: UNT Libraries Government Documents Department
open access

Experimental Study of Ignition by Hot Spot in Internal Combustion Engines

Description: "In order to carry out the contemplated study, it was first necessary to provide hot spots in the combustion chamber, which could be measured and whose temperature could be changed. It seemed difficult to realize both conditions working solely on the temperature of the cooling water in a way so as to produce hot spots on the cylinder wall capable of provoking autoignition. Moreover, in the majority of practical cases, autoignition is produced by the spark plug, one of the least cooled parts in … more
Date: August 1938
Creator: Serruys, Max
Partner: UNT Libraries Government Documents Department
open access

The Pack Method for Compressive Tests of Thin Specimens of Materials Used in Thin-Wall Structures

Description: "The strength of modern lightweight thin-wall structures is generally limited by the strength of the compression members. An adequate design of these members requires a knowledge of the compressive stress-strain graph of the thin-wall material. The "pack" method was developed at the National Bureau of Standards with the support of the National Advisory Committee for Aeronautics to make possible a determination of compressive stress-strain graphs for such material" (p. 133).
Date: August 23, 1938
Creator: Aitchison, C. S. & Tuckerman, L. B.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen