Search Results

open access

4-D High-Resolution Seismic Reflection Monitoring of Miscible CO2 Injected into a Carbonate Reservoir

Description: The objective of this research project is to acquire, process, and interpret multiple high-resolution 3-D compressional wave and 2-D, 2-C shear wave seismic data in an attempt to observe changes in fluid characteristics in an oil field before, during, and after the miscible carbon dioxide (CO{sub 2}) flood that began around December 1, 2003, as part of the DOE-sponsored Class Revisit Project (DOE DE-AC26-00BC15124). Unique and key to this imaging activity is the high-resolution nature of the seismic data, minimal deployment design, and the temporal sampling throughout the flood. The 900-m-deep test reservoir is located in central Kansas oomoldic limestones of the Lansing-Kansas City Group, deposited on a shallow marine shelf in Pennsylvanian time. After 30 months of seismic monitoring, one baseline and eight monitor surveys clearly detected changes that appear consistent with movement of CO{sub 2} as modeled with fluid simulators and observed in production data.
Date: August 31, 2006
Creator: Miller, Richard D.; Raef, Abdelmoneam E.; Byrnes, Alan P. & Harrison, William E.
Partner: UNT Libraries Government Documents Department
open access

219-S chemical compatibility

Description: This document consists of tables of the materials that make up the ''wetted'' parts of the 219-S waste handling facility and a combination of manufacturer lists of chemicals that are not recommended.
Date: August 31, 1999
Creator: Goodwin, L. D.
Partner: UNT Libraries Government Documents Department
open access

242-A MCS Logic Acceptance Test Report for Year 2000 Upgrade

Description: 242-A Evaporator distributive control system upgrade to D/3 version 9.0-2 for year 2000 compliance. Testing was performed per test procedure HNF-3568. There were no unresolved exceptions. The system responded correctly to all testing and meets the requirements to operate the 242-A This report documents the acceptance test results for the Evaporator facility.
Date: August 31, 1999
Creator: Teats, M. C.
Partner: UNT Libraries Government Documents Department
open access

275 C Downhole Microcomputer System

Description: An HC11 controller IC and along with serial SRAM and ROM support ICs chip set were developed to support a data acquisition and control for extreme temperature/harsh environment conditions greater than 275 C. The 68HC11 microprocessor is widely used in well logging tools for control, data acquisition, and signal processing applications and was the logical choice for a downhole controller. This extreme temperature version of the 68HC11 enables new high temperature designs and additionally allows 68HC11-based well logging tools and MWD tools to be upgraded for high temperature operation in deep gas reservoirs, The microcomputer chip consists of the microprocessor ALU, a small boot ROM, 4 kbyte data RAM, counter/timer unit, serial peripheral interface (SPI), asynchronous serial interface (SCI), and the A, B, C, and D parallel ports. The chip is code compatible with the single chip mode commercial 68HC11 except for the absence of the analog to digital converter system. To avoid mask programmed internal ROM, a boot program is used to load the microcomputer program from an external mask SPI ROM. A SPI RAM IC completes the chip set and allows data RAM to be added in 4 kbyte increments. The HC11 controller IC chip set is implemented in the Peregrine Semiconductor 0.5 micron Silicon-on-Sapphire (SOS) process using a custom high temperature cell library developed at Oklahoma State University. Yield data is presented for all, the HC11, SPI-RAM and ROM. The lessons learned in this project were extended to the successful development of two high temperature versions of the LEON3 and a companion 8 Kbyte SRAM, a 200 C version for the Navy and a 275 C version for the gas industry.
Date: August 31, 2008
Creator: Hutchens, Chris & Soo, Hooi Miin
Partner: UNT Libraries Government Documents Department
open access

275 C Downhole Switched-Mode Power Supply

Description: A vee-square (V2) control based controller IC is developed for a switch mode power supply capable of operating at extreme temperature/harsh environment conditions. A buck type regulator with silicon carbide power junction field effect transistors (JFET) as power devices is used to analyze the performance of controller. Special emphases are made on the analog sub-blocks--voltage reference, operational transconductance amplifier and comparator as individual building blocks. Transformer coupled gate drives and high temperature operable magnetic cores and capacitors are identified and tested for use in the design. Conventional ceramic chip packaging of ICs combined with lead carrier type mounting of passive filter components is introduced for hybrid packaging of the complete product. The developed SMPS is anticipated to support the operation of down-hole microcontrollers and other electronics devices that require low/medium power filtered dc inputs over an operating temperature of 275 C.
Date: August 31, 2008
Creator: Hutchens, Chris & Madhuravasal, Vijay
Partner: UNT Libraries Government Documents Department
open access

309 Building transition plan

Description: The preparation for decontamination and decommissioning (transition) of the 309 Building is projected to be completed by the end of the fiscal year (FY) 1998. The major stabilization and decontamination efforts include the Plutonium Recycle Test Reactor (PRTR), fuel storage and transfer pits, Transfer Waste (TW) tanks and the Ion Exchange Vaults. In addition to stabilizing contaminated areas, equipment, components, records, waste products, etc., will be dispositioned. All nonessential systems, i.e., heating, ventilation, and air conditioning (HVAC), electrical, monitoring, fluids, etc., will be shut down and drained/de-energized. This will allow securing of the process, laboratory, and office areas of the facility. After that, the facility will be operated at a level commensurate with its surveillance needs while awaiting D&D. The implementation costs for FY 1995 through FY 1998 for the transition activities are estimated to be $1,070K, $2,115K, $2,939K, and $4,762K, respectively. Costs include an assumed company overhead of 20% and a 30% out year contingency.
Date: August 31, 1994
Creator: Graves, C. E.
Partner: UNT Libraries Government Documents Department
open access

The 2010 Oil Spill: Criminal Liability Under Wildlife Laws

Description: This report highlights the possible ways to prosecute those who caused the 2010 oil spill in the Gulf of Mexico. The report suggests that prosecution can be done under laws such as the ESA (Endangered Species Act) or the MMPA (Marine Mammal Protection Act) both of which provide for civil and criminal punishment. However, the most likely law to be used will be the MBTA (Migratory Bird Treatment Act) which makes it a crime to kill migratory birds. The report suggests that the MBTA would be the best method to prosecute for criminal liability.
Date: August 31, 2010
Creator: Alexander, Kristina
Partner: UNT Libraries Government Documents Department
open access

2012 SRNL-EM VANE RHEOLOGY RESULTS

Description: The vane method has been shown to be an effective tool in measuring the yield stress of both settled and mixed slurries in laboratory bench scale conditions in supporting assessments of both actual and simulant waste slurries. The vane has also been used to characterize dry powders and granular solids, the effect of non-cohesive solids with interstitial fluids and used as a guide to determine if slip is present in the geometries typically used to perform rheological flow curve measurements. The vane has been extensively characterized for measuring the shear strength in soils in both field and laboratory studies. The objectives for this task are: Fabricate vane instrument; Bench top testing to further characterize the effect of cohesive, non-cohesive, and blends of cohesive/non-cohesive simple simulants; Data from measurement of homogenized and settled bed of Kaolin sludge and assessment of the technology. In this document, the assessment using bench scale measurements of non-cohesive materials (beads) and cohesive materials (kaolin) is discussed. The non-cohesive materials include various size beads and the vane was assessed for depth and deaeration (or packing) via tapping measurements. For the cohesive (or non-Newtonian) materials, flow curves and yield stress measurements are performed using the vane and this data is compared to the traditional concentric cylinder flow curve measurement. Finally, a large scale vane was designed, fabricated, and tested with the cohesive (or non-Newtonian) materials to determine how a larger vane performs in measuring the yield stress and flow curve of settled cohesive solids.
Date: August 31, 2012
Creator: Hansen, E.; Marzolf, A. & Hera, K.
Partner: UNT Libraries Government Documents Department
open access

21st Century Locomotive Technology: Quarterly Technical Status Report 6 DOE/AL68284-TSR06

Description: Experimental work to map the performance of the High Pressure Common Rail (HPCR) system on a locomotive is in progress. The experimental trends agree with KIVA modeling predictions. Injection optimization is in progress. Electrically-assisted turbocharger modeling was used to study passenger locomotive performance improvements. Energy storage cycling life testing began, and an improved battery state algorithm was determined. The hybrid locomotive energy storage was prepared for energy management system algorithm testing. Progress in reliable methods for computing optimal driving plans, and methods to reduce the complexity of the necessary optimization are reported.
Date: August 31, 2004
Creator: Salasoo, Lembit; Topinka, Jennifer & Houpt, Paul K.
Partner: UNT Libraries Government Documents Department
open access

242A Distributed Control System Year 2000 Acceptance Test Report

Description: This report documents acceptance test results for the 242-A Evaporator distributive control system upgrade to D/3 version 9.0-2 for year 2000 compliance. This report documents the test results obtained by acceptance testing as directed by procedure HNF-2695. This verification procedure will document the initial testing and evaluation of the potential 242-A Distributed Control System (DCS) operating difficulties across the year 2000 boundary and the calendar adjustments needed for the leap year. Baseline system performance data will be recorded using current, as-is operating system software. Data will also be collected for operating system software that has been modified to correct year 2000 problems. This verification procedure is intended to be generic such that it may be performed on any D/3{trademark} (GSE Process Solutions, Inc.) distributed control system that runs with the VMSTM (Digital Equipment Corporation) operating system. This test may be run on simulation or production systems depending upon facility status. On production systems, DCS outages will occur nine times throughout performance of the test. These outages are expected to last about 10 minutes each.
Date: August 31, 1999
Creator: Teats, M. C.
Partner: UNT Libraries Government Documents Department
open access

Abandoned Mine Reclamation Fee on Coal

Description: This report summarizes the problems that surround the Abandoned Mine Reclamation Fund or Abandoned Mine Land (AML) Fund. This report also includes information on the history of the fund and fees, such as congress extending the fees it imposes six times. Nevertheless, one of the central problems in the report is extending the fees further.
Date: August 31, 2006
Creator: Bamberger, Robert L.
Partner: UNT Libraries Government Documents Department
open access

Access to Broadband Networks

Description: From Summary: "This report analyzes these three components to identify the parameters that network providers have within their control (such as their choices about network architecture, overall bandwidth capacity, bandwidth reserved for their own use, traffic prioritization, the terms and rates for access to their networks and for their own use, traffic prioritization, the terms and rates for access to their networks and for their retail services) that can affect how end users and independent applications providers can access their networks, how those parameters might be used strategically to harm competition for, and consumers of, voice over internet protocol (VOIP), video, and other applications that ride over broadband networks."
Date: August 31, 2006
Creator: Goldfarb, Charles B.
Partner: UNT Libraries Government Documents Department
open access

Access to Government Information in the United States

Description: The U.S. Constitution makes no specific allowance for any one of the three branches of the federal government to have access to information held by the others. No provision in the U.S. Constitution expressly establishes a procedure for public access to government information. Congress has legislated various public access laws. Among these laws are two records access statutes, The Freedom of Information Act, the Privacy Act, and two meetings access statutes, the Federal Advisory Committee Act, and the Government in the Sunshine Act. This report offers an overview of the four information access laws noted above, and provides citations to additional resources related to these tools.
Date: August 31, 2009
Creator: Ginsberg, Wendy R.
Partner: UNT Libraries Government Documents Department
open access

Access to Government Information In the United States: A Primer

Description: The U.S. Constitution makes no specific allowance for any one of the three branches of the federal government to have access to information held by the others. No provision in the U.S. Constitution expressly establishes a procedure for public access to government information. Congress has legislated various public access laws. Among these laws are two records access statutes, The Freedom of Information Act, the Privacy Act, and two meetings access statutes, the Federal Advisory Committee Act, and the Government in the Sunshine Act. This report offers an overview of the four information access laws noted above, and provides citations to additional resources related to these tools.
Date: August 31, 2009
Creator: Ginsberg, Wendy R.
Partner: UNT Libraries Government Documents Department
open access

Activity Based Startup Plan for Prototype Vertical Denitration Calciner

Description: Testing activities on the Prototype Vertical Denitration Calciner at PFP were suspended in January 1997 due to the hold on fissile material handling in the facility. The restart of testing activities will require a review through an activity based startup process based upon Integrated Safety Management (ISM) principles to verify readiness. The Activity Based Startup Plan has been developed for this process.
Date: August 31, 1999
Creator: SUTTER, C.S.
Partner: UNT Libraries Government Documents Department
open access

Adaptive Nodal Transport Methods for Reactor Transient Analysis, 2005, August 31

Description: Develop methods for adaptively treating the angular, spatial, and time dependence of the neutron flux in reactor transient analysis. These methods were demonstrated in the DOE transport nodal code VARIANT and the US NRC spatial kinetics code, PARCS.
Date: August 31, 2005
Creator: Downar, Thomas & Lewis, E.
Partner: UNT Libraries Government Documents Department
open access

Adequate Yearly Progress (AYP): Implementation of the No Child Left Behind Act

Description: This report is intended to provide an overview of the Adequate Yearly Process (AYP) concept and several related issues, a description of the AYP provisions of the No Child Left Behind Act, and an analysis of the implementation of these provisions by the U.S. Department of Education (ED) and the states. It will be updated when major administrative actions are taken by ED, or substantial new data on state implementation become available.
Date: August 31, 2006
Creator: Riddle, Wayne C.
Partner: UNT Libraries Government Documents Department
open access

Advanced Accelerator Physics Research at UCLA

Description: Closeout report on Advanced Accelerator Physics program at UCLA Physics & Astronomy
Date: August 31, 2012
Creator: Cline, David B
Partner: UNT Libraries Government Documents Department
open access

Advanced Flue Gas Desulfurization (AFGD) Demonstration Project, A DOE Assessment

Description: The AFGD process as demonstrated by Pure Air at the Bailly Station offers a reliable and cost-effective means of achieving a high degree of SO{sub 2} emissions reduction when burning high-sulfur coals. Many innovative features have been successfully incorporated in this process, and it is ready for widespread commercial use. The system uses a single-loop cocurrent scrubbing process with in-situ oxidation to produce wallboard-grade gypsum instead of wet sludge. A novel wastewater evaporation system minimizes effluents. The advanced scrubbing process uses a common absorber to serve multiple boilers, thereby saving on capital through economies of scale. Major results of the project are: (1) SO{sub 2} removal of over 94 percent was achieved over the three-year demonstration period, with a system availability exceeding 99.5 percent; (2) a large, single absorber handled the combined flue gas of boilers generating 528 MWe of power, and no spares were required; (3) direct injection of pulverized limestone into the absorber was successful; (4) Wastewater evaporation eliminated the need for liquid waste disposal; and (5) the gypsum by-product was used directly for wallboard manufacture, eliminating the need to dispose of waste sludge.
Date: August 31, 2001
Creator: National Energy Technology Laboratory (U.S.)
Partner: UNT Libraries Government Documents Department
open access

Advanced gas cooled nuclear reactor materials evaluation and development program. Progress report, April 1--June 30, 1978

Description: The objectives of the program are to evaluate candidate alloys for Very High Temperature Reactor Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the affect of simulated reactor primary coolant (Helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Work covered in the report includes the activities associated with the procurement of the materials for the screening test program, information from vendor certification for the materials receiver, and preliminary information from the materials characterization tests performed by General Electric. The construction status of the simulated reactor helium supply system, testing equipment, and gas chemistry analysis instrumentation and equipment are discussed. The status of the data management system is also reviewed.
Date: August 31, 1978
Partner: UNT Libraries Government Documents Department
open access

Advanced Gasification By-Product Utilization

Description: With the passing of legislation designed to permanently cap and reduce mercury emissions from coal-fired utilities, it is more important than ever to develop and improve upon methods of controlling mercury emissions. One promising technique is carbon sorbent injection into the flue gas of the coal-fired power plant. Currently, this technology is very expensive as costly commercially activated carbons are used as sorbents. There is also a significant lack of understanding of the interaction between mercury vapor and the carbon sorbent, which adds to the difficulty of predicting the amount of sorbent needed for specific plant configurations. Due to its inherent porosity and adsorption properties as well as on-site availability, carbons derived from gasifiers are potential mercury sorbent candidates. Furthermore, because of the increasing restricted use of landfilling, the coal industry is very interested in finding uses for these materials as an alternative to the current disposal practice. The results of laboratory investigations and supporting technical assessments conducted under DOE Subcontract No. DE-FG26-03NT41795 are reported. This contract was with the University of Kentucky Research Foundation, which supports work with the University of Kentucky Center for Applied Energy Research and The Pennsylvania State University Energy Institute. The worked described was part of a project entitled ''Advanced Gasification By-Product Utilization''. This work involved the development of technologies for the separation and characterization of coal gasification slags from operating gasification units, activation of these materials to increase mercury and nitrogen oxide capture efficiency, assessment of these materials as sorbents for mercury and nitrogen oxides, assessment of the potential for leaching of Hg captured by the carbons, analysis of the slags for cement applications, and characterization of these materials for use as polymer fillers. The objectives of this collaborative effort between the University of Kentucky Center for Applied Energy Research (CAER), The Pennsylvania State …
Date: August 31, 2006
Creator: Andrews, Rodney; Rubel, Aurora; Groppo, Jack; Marrs, Brock; Geertsema, Ari; Huggins, Frank et al.
Partner: UNT Libraries Government Documents Department
open access

Advanced Gasifier Pilot Plant Concept Definition

Description: This report presents results from definition of a preferred commercial-scale advanced gasifier configuration and concept definition for a gasification pilot plant incorporating those preferred technologies. The preferred commercial gasifier configuration was established based on Cost Of Electricity estimates for an IGCC. Based on the gasifier configuration trade study results, a compact plug flow gasifier, with a dry solids pump, rapid-mix injector, CMC liner insert and partial quench system was selected as the preferred configuration. Preliminary systems analysis results indicate that this configuration could provide cost of product savings for electricity and hydrogen ranging from 15%-20% relative to existing gasifier technologies. This cost of product improvement draws upon the efficiency of the dry feed, rapid mix injector technology, low capital cost compact gasifier, and >99% gasifier availability due to long life injector and gasifier liner, with short replacement time. A pilot plant concept incorporating the technologies associated with the preferred configuration was defined, along with cost and schedule estimates for design, installation, and test operations. It was estimated that a 16,300 kg/day (18 TPD) pilot plant gasifier incorporating the advanced gasification technology and demonstrating 1,000 hours of hot-fire operation could be accomplished over a period of 33 months with a budget of $25.6 M.
Date: August 31, 2005
Creator: Fusselman, Steve; Darby, Alan & Widman, Fred
Partner: UNT Libraries Government Documents Department
open access

Advanced Gearless Drivetrain - Phase I Technical Report

Description: Boulder Wind Power (“BWP”) collaborated with the National Renewable Energy Laboratory (NREL) in Golden, Colorado, to demonstrate the economics of scaling an advanced gearless drivetrain technology to 6MW (and larger) turbine applications. The project goal was to show that this advanced drivetrain technology enables a cost of energy of less than $0.10/kWH in offshore applications. This drivetrain technology achieves this Cost of Energy (“COE”) advantage via a 70% greater torque density versus current state-of-the-art drivetrain technologies. In addition, a new dynamically compliant design strategy is required to optimize turbine system-level COE. The BWP generator is uniquely suited for this new design strategy. This project developed a concept design for a 6MW drivetrain and culminated in a plan for a system-level test of this technology at 3MW scale. The project further demonstrated the advantage of the BWP drivetrain with increasing power ratings, with conceptual designs through 10 MW.
Date: August 31, 2012
Creator: Butterfield, Sandy; Smith, Jim; Petch, Derek; Sullivan, Brian; Smith, Peter & Pierce, Kirk
Partner: UNT Libraries Government Documents Department
Back to Top of Screen