19,212 Matching Results

Search Results

Results: 1 - 24 next
open access

Local Effects of Biased Electrodes in the Divertor of NSTX

Description: The goal of this paper is to characterize the effects of small non-axisymmetric divertor plate electrodes on the local scrape-off layer plasma. Four small rectangular electrodes were installed into the outer divertor plates of NSTX. When the electrodes were located near the outer divertor strike point and biased positively, there was an increase in the nearby probe currents and probe potentials and an increase in the LiI light emission at the large major radius end of these electrodes. When an … more
Date: May 7, 2012
Creator: : S. Zweben, M.D. Campanell, B.C. Lyons, R.J. Maqueda, Y. Raitses, A.L. Roquemore and F. Scotti
Partner: UNT Libraries Government Documents Department
open access

Can Data Recognize Its Parent Distribution?

Description: This study is concerned with model selection of lifetime and survival distributions arising in engineering reliability or in the medical sciences. We compare various distributions, including the gamma, Weibull and lognormal, with a new distribution called geometric extreme exponential. Except for the lognormal distribution, the other three distributions all have the exponential distribution as special cases. A Monte Carlo simulation was performed to determine sample sizes for which survival dis… more
Date: May 1, 1999
Creator: A.W.Marshall; J.C.Meza & Olkin, and I.
Partner: UNT Libraries Government Documents Department
open access

Microstructure, Phase Formation, and Stress of Reactively-Deposited Metal Hydride Thin Films

Description: This document summarizes research of reactively deposited metal hydride thin films and their properties. Reactive deposition processes are of interest, because desired stoichiometric phases are created in a one-step process. In general, this allows for better control of film stress compared with two-step processes that react hydrogen with pre-deposited metal films. Films grown by reactive methods potentially have improved mechanical integrity, performance and aging characteristics. The two reac… more
Date: May 1, 2002
Creator: ADAMS, DAVID P.; ROMERO, JUAN A.; RODRIGUEZ, MARK A.; FLORO, JERROLD A. & KOTULA, PAUL G.
Partner: UNT Libraries Government Documents Department
open access

[Monthly financial report, May 31, 1989]

Description: A financial statement from the AIDS Resource Center for the AIDS ARMS Network, Inc., dated May 31, 1989.
Date: May 31, 1989
Creator: AIDS ARMS Network, Inc.
Partner: UNT Libraries Special Collections
open access

Representative volume size: A comparison of statistical continuum mechanics and statistical physics

Description: In this combination background and position paper, the authors argue that careful work is needed to develop accurate methods for relating the results of fine-scale numerical simulations of material processes to meaningful values of macroscopic properties for use in constitutive models suitable for finite element solid mechanics simulations. To provide a definite context for this discussion, the problem is couched in terms of the lack of general objective criteria for identifying the size of the… more
Date: May 1, 1999
Creator: AIDUN,JOHN B.; TRUCANO,TIMOTHY G.; LO,CHI S. & FYE,RICHARD M.
Partner: UNT Libraries Government Documents Department
open access

Cloud to CAD

Description: This paper documents work performed to convert scanned range data to CAD solid model representation. The work successfully developed surface fitting algorithms for quadric surfaces (e.g. plane, cone, cylinder, and sphere), and a segmentation algorithm based entirely on surface type, rather than on a differential metric like Gaussian curvature. Extraction of all CAD-required parameters for quadric surface representation was completed. Approximate face boundaries derived from the original point c… more
Date: May 1, 2001
Creator: AMES,ARLO L.
Partner: UNT Libraries Government Documents Department
open access

Blade Manufacturing Improvement: Remote Blade Manufacturing Demonstration

Description: The objective of this program was to investigate manufacturing improvements for wind turbine blades. The program included a series of test activities to evaluate the strength, deflection, performance, and loading characteristics of the prototype blades. The original contract was extended in order to continue development of several key blade technologies identified in the project. The objective of the remote build task was to demonstrate the concept of manufacturing wind turbine blades at a temp… more
Date: May 1, 2003
Creator: ASHWILL, THOMAS D.
Partner: UNT Libraries Government Documents Department
open access

Cost Study for Large Wind Turbine Blades

Description: The cost study for large wind turbine blades reviewed three blades of 30 meters, 50 meters, and 70 meters in length. Blade extreme wind design loads were estimated in accordance with IEC Class I recommendations. Structural analyses of three blade sizes were performed at representative spanwise stations assuming a stressed shell design approach and E-glass/vinylester laminate. A bill of materials was prepared for each of the three blade sizes using the laminate requirements prepared during the s… more
Date: May 1, 2003
Creator: ASHWILL, THOMAS D.
Partner: UNT Libraries Government Documents Department
open access

Laser Safety Audit and Inventory System Database

Description: A laser safety auditing and inventory system has been in use at Sandia National Laboratories--Albuquerque for the past five years and has recently been considered for adoption by Sandia National Laboratories--Livermore. The system utilizes the ''Microsoft Access'' database application, part of the Office 2000 software package. Audit and inventory data is available on-line for ready access by laser users. Data is updated weekly to provide users with current information relating to laser facility… more
Date: May 1, 2003
Creator: AUGUSTONI, ARNOLD L.
Partner: UNT Libraries Government Documents Department
open access

The comparison of element partitioning in two types of thermal treatment facilities and the effects on potential radiation dose

Description: The US Department of Energy (DOE) is performing a technical analysis to support the potential development of risk-based, numerical radiological control criteria (RCC) for mixed waste from DOE operations. As part of the technical analysis, potential future radiation doses are being calculated for workers at thermal treatment facilities and members of the public residing near such facilities. This study compared two types of thermal treatment systems: a conventional combustion chamber with excess… more
Date: May 1, 1995
Creator: Aaberg, R. L.; Burger, L. L.; Baker, D. A.; Wallo, A., III; Vazquez, G. A. & Beck, W. L.
Partner: UNT Libraries Government Documents Department
open access

ALARA Analysis of Radiological Control Criteria Associated with Alternatives for Disposal of Hazardous Wastes

Description: This ALARA analysis of Radiological Control Criteria (RCC) considers alternatives to continued storage of certain DOE mixed wastes. It also considers the option of treating hazardous wastes generated by DOE facilities, which have a very low concentration of radionuclide contaminants, as purely hazardous waste. Alternative allowable contaminant levels examined correspond to doses to an individual ranging from 0.01 mrem/yr to 10 to 20 mrem/yr. Generic waste inventory data and radionuclide source … more
Date: May 15, 2002
Creator: Aaberg, Rosanne L.; Bilyard, Gordon R.; Branch, Kristi M.; Lavender, Jay C. & Miller, Peter L.
Partner: UNT Libraries Government Documents Department
open access

Porosity in millimeter-scale welds of stainless steel : three-dimensional characterization.

Description: A variety of edge joints utilizing a continuous wave Nd:YAG laser have been produced and examined in a 304-L stainless steel to advance fundamental understanding of the linkage between processing and resultant microstructure in high-rate solidification events. Acquisition of three-dimensional reconstructions via micro-computed tomography combined with traditional metallography has allowed for qualitative and quantitative characterization of weld joints in a material system of wide use and broad… more
Date: May 1, 2012
Creator: Aagesen, Larry K. & Madison, Jonathan D.
Partner: UNT Libraries Government Documents Department
open access

Uranium hydrogeochemical and stream sediment reconnaissance in Lincoln and Flathead Counties, northwest Montana

Description: Between mid-May and late June 1976, 3409 water and water-transported sediment samples were collected from 1781 locations spread over an approximate 17000-km/sup 2/ area of northwestern Montana. All of the samples were analyzed for total uranium at the LASL, using standardized procedures and rigorous quality controls, the waters by fluorometry and the sediment (and those waters with greater than 10 ppb uranium) by delayed-neutron counting methods. All of the field collection, treatment, and pack… more
Date: May 1, 1977
Creator: Aamodt, P. L.
Partner: UNT Libraries Government Documents Department
open access

Uranium Hydrogeochemical and Stream Sediment Reconnaissance in Lincoln and Flathead Counties, Northwest Montana

Description: From abstract: Between mid-May and late June 1976, 3409 water and water-transported sediment samples were collected from 1781 locations spread over an approximate 17 000 kilometer area of northwestern Montana. All of the samples were analyzed for total uranium at the LASL, using standardized procedures and rigorous quality controls--the waters by fluorometry and the sediment (and those waters with >10 parts per billion uranium) by delayed-neutron counting methods.
Date: May 1977
Creator: Aamodt, Paul L.
Partner: UNT Libraries Government Documents Department
open access

Uranium Hydrogeochemical and Stream Sediment Reconnaissance Data from the Area of the Noatak and Portions of the Baird Mountains and Ambler River Quadrangles, Alaska

Description: From introduction: This report describes work done in the Noatak and portions of the Baird Mountains and Ambler River, Alaska, National Topographic Map Series (NTMS) quadrangles (1:250 000 scale) by the Los Alamos Scientific Laboratory (LASL) as part of the nationwide Hydrogeochemical and Stream Sediment Reconnaissance (HSSR).
Date: May 1978
Creator: Aamodt, Paul L.; Hill, Dwight E. & Sharp, Robert R., Jr.
Partner: UNT Libraries Government Documents Department
open access

Uranium hydrogeochemical and stream sediment reconnaissance data from the area of the Noatak and portions of the Baird Mountains and Ambler River Quadrangles, Alaska

Description: During August 1976, a total of 876 natural waters and 861 bottom sediments were collected at a nominal density of one location each 23 km/sup 2/ from streams and small lakes throughout the Noatak NTMS quadrangle, the southern two-thirds of the Baird Mountains NTMS quadrangle, and in the southwest corner of the Ambler River NTMS quadrangle. These samples were collected as part of the National Uranium Resource Evaluation program in Alaska being conducted by the Los Alamos Scientific Laboratory (L… more
Date: May 1, 1978
Creator: Aamodt, Paul L.; Hill, Dwight E. & Sharp, Robert R., Jr.
Partner: UNT Libraries Government Documents Department
open access

Fundamental studies of fusion plasmas

Description: The major portion of this program is devoted to critical ICH phenomena. The topics include edge physics, fast wave propagation, ICH induced high frequency instabilities, and a preliminary antenna design for Ignitor. This research was strongly coordinated with the world's experimental and design teams at JET, Culham, ORNL, and Ignitor. The results have been widely publicized at both general scientific meetings and topical workshops including the speciality workshop on ICRF design and physics spo… more
Date: May 26, 1992
Creator: Aamodt, R. E.; Catto, P. J.; D'Ippolito, D. A.; Myra, J. R. & Russell, D. A.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen