88 Matching Results

Search Results

Results: 1 - 24 next
open access

100-C water plant

Description: System curves for each portion of the C Area Water Plant were obtained from referenced work and are presented in figures. Field test data, corroborating the calculated curves, are presented as singular points on the same graphs. Present maxima capacity of the C Area Filter Plant was 121,000 gpm with 118,000 gpm available for use as primary reactor coolant. Modifications to the filter effluent piping would increase this available flow to about 180,000 gpm. Of the 118,000 gpm available for C Reac… more
Date: February 20, 1961
Creator: Agar, J. D.
Partner: UNT Libraries Government Documents Department
open access

EBWR CORE 1A PHYSICS ANALYSIS

Description: The studies were primarily directed toward selection of the optimum loading for Core lA and a prediction of its properties. Included are analyses of some relevant experiments on Core 1, and prelimlnary modifications of Core 1 to Core lA. The factors which must be considered for the optimum loading determination are discussed. Four different loading pattenrs were investigated, which were considered to span the numerous possibilitles. Adequate cold shutdown was found to be almost unobtainable wit… more
Date: February 1, 1961
Creator: Avery, R.; Almenas, K.; Carson, C.; Iskenderian, H. & Kelber, C.
Partner: UNT Libraries Government Documents Department
open access

HRT CORROSION SAMPLES--ADDITIONAL DATA ON SPECIMENS REMOVED PRIOR TO RUN NO. 20

Description: Results of the examinations of corrosion specimens exposed in the HRT are presented. Specimens examined include core screen samples, core specimen array No. 1, blanket specimen array No. 2, core solution line specimen arrays No. 103 and 103A, and blanket solution line specimen array No. 203. These data include corrosion rates, computed from specimen weight-changes, and results of chemical analyses of scales removed from the specimens or specimen holders. A summary is included of the HRT operati… more
Date: February 1, 1961
Creator: Baker, J.E.; Silverman, M.D.; Jenks, G.H. & Olsen, A.R.
Partner: UNT Libraries Government Documents Department
open access

Revised requirements for continuous birch recovery at Redox

Description: The process criteria proposed use of the existing organic wash column, 10, as a stripping column for the neptunium accumulation and isolation cycles. It is now proposed to employ a new processing concept which will permit the use of the scrub section of the neptunium extraction column, 1S, for neptunium stripping thereby obviating the use of the 10 Column. This proposed new scheme will provide increased neptunium stripping efficiency and greater processing flexibility for the 1S Column. The rev… more
Date: February 2, 1961
Creator: Barnes, R. G.
Partner: UNT Libraries Government Documents Department
open access

Specific activity of the NPR primary coolant loop

Description: In coolant system such as NPR's, the coolant activity level increase with each succeeding pass through the reactor flux until a saturation limit is reached. Therefore, the activity level of the NPR coolant system will be much higher than that of the old reactor once-through systems. This report is the determination of the specific activities (disintegrations/cc{center dot}sec) of the various coolant impurities which determine the total activity of the coolant system. 10 refs., 13 figs., 2 tabs.
Date: February 16, 1961
Creator: Bitz, D.A.
Partner: UNT Libraries Government Documents Department
open access

Interim goal exposure plans for O-III-NB and O-III-EB material for B, D, DR and F reactors

Description: The purpose of this report is to recommend variable goal plans for natural and enriched bumper fuel elements, specifically for 0-III-NB and 0-III-EB materials, to be irradiated at the B, D, DR, and F Reactors. The average goal exposure for all bumper fuel elements at D Reactor was specified to be 900 MWD/T, with provisions being made for revision by normal procedures. Exposures for enriched bumper material at the B, M. and F Reactors were not specified in the PITA supplement authorizing chargin… more
Date: February 13, 1961
Creator: Bloomstrand, R. R.
Partner: UNT Libraries Government Documents Department
open access

MUFT-5--A FAST NEUTRON SPECTRUM PROGRAM FOR THE PHILCO-2000

Description: The program was written for the Philco-2000 computer to provide a nuclear design computing tool equivalent to the IBM-704 computer program MUFT-4 and to provide a set of routines for a future spatial multigroup program, P/sub 3/ MG-1. In addition to the features of its 704 predecessor, MUFT-5 provides a more complete isotopic edit, an optional blackness coefficient edit, and the use of a complete P/sub i/->i>s library. The resultant program is found to be easier to use because of the simplicity… more
Date: February 1, 1961
Creator: Bohl, H. Jr. & Hemphill, A.P.
Partner: UNT Libraries Government Documents Department
open access

Engineering Applications of Analog Computers

Description: Six examples are given of the application of analog computers in the fields of reactor engineering, heat transfer, and dynamics: deceleration of a reactor control rod by dashpot, pressure variations through a packed bed, reactor kinetics over many decades with thermal feedback (simulation of a TREAT transient), vibrating system with two degrees of freedom, temperature distribution in a radiating fin, and temperature distribution in an irfinite slab with variable thermal properties. (D.L.C.)
Date: February 1, 1961
Creator: Bryant, L. T.; Janicke, M. J.; Just, L. C. & Winiecki, A. L.
Partner: UNT Libraries Government Documents Department
open access

A standard AlSi braze wetting test for aluminum components used in the lead-dip process

Description: Wetting of the aluminum components by aluminum-silicon brazing alloy is a major factor influencing the quality of the fuel elements. Several process variables associated with the impact extrusion of aluminum components influence the resulting Al surface. In addition, these processing variables interact with the HAPO component production cleaning process to give varying results. Purpose of this document is to define the parameters for selecting, preparing) testing and evaluating the AlSi wetting… more
Date: February 1, 1961
Creator: Burgess, C. A.
Partner: UNT Libraries Government Documents Department
open access

Feasibility Study of a New Mass Flow System. Period Covered January 1- January 31, 1961

Description: Machining was completed on the s-tube flow element, and a spring, for use at a constant known temperature, was constructed for the flow element. Calculations for geometry factor, detector efficiency, and effective absorption along the useful radiation path were completed for the reed densitometer. The flow rate control was calibrated and performed satisfactorily. Response to step transient changes occurred with a damping constant of about 0.6 and an effective response time of 10 sec. Sources of… more
Date: February 15, 1961
Creator: Burgwald, G. M.
Partner: UNT Libraries Government Documents Department
open access

A Condenser for the Vacuum Distillation of Metals

Description: A condenser, suitable for use in the distillation of metals was designed. The temperature of the condensing surface was established by controlling the pressure over boiling NaK-78 contained within the condenser. Performance was evaluated in test units in which pure bismuth was distilled as the test metal. (auth)
Date: February 1, 1961
Creator: Burnet, G. & Buchanan, W.
Partner: UNT Libraries Government Documents Department
open access

SELECTIVE REDUCTION OF PLUTONIUM(VI) TO PLUTONIUM(IV) IN A PLUTONIUM(IV-VI) NITRIC ACID SOLUTION

Description: The technique for adjusting the valence of Pu in the Pu(IV-VI) system to the Pa(IV) state for efficient solvent extraction or anion exchange is described. Investigations show that Pu(VI) may be reliably reduced to Pu(IV) with ferrous suifamate s. Nitric acid concentration must be between 2 and 6 M to avoid Pu disproportionation of suifamate precipitation. Ferrous sulfamate concentration is kept below 1 M to prevent crystal formation after the reaction, but Pu concentration may be as high as 250… more
Date: February 1, 1961
Creator: Campbell, M.H.
Partner: UNT Libraries Government Documents Department
open access

Tests of the HNPF Plugging Meter

Description: A plugging meter designed for the Hallam Nuclear Power Facility was tested. Plugging performance was satisfactory and excellent reprcducibility was achieved. Although the time limitations precluded complete testing of the automatic control equipment, the tests performed gave satisfactory indication of correct performance. (auth)
Date: February 13, 1961
Creator: Davis, K. A.
Partner: UNT Libraries Government Documents Department
open access

Design Modifications to the SRE During FY 1960

Description: The means used to prevent the recurrence of tetralin leakage into the SRE sodium systems are discussed. Included is a description of the redssign of system components to utilize alteraate coolants such as nitrogen, air, and NaK. The use of kerosene to replace tetralin, where double containment is provided, is discussed. The physical properties are compared, and kerosene is shown to be free of the undesirable characteristics of tetralin. The fuelelement cleaning systsm was redesigned for steam w… more
Date: February 15, 1961
Creator: Deegan, G. E.; Dermer, M. D.; Flanagan, J. S.; Gower, G. C.; Hall, R. J.; Hinze, R. B. et al.
Partner: UNT Libraries Government Documents Department
open access

Radiochemistry for the rupture of a Zircaloy-2 clad uranium fuel element in KER-1

Description: During the 0800--1600 shift on July 7, 1960, the delayed neutron monitor on KER Loop 1 indicated a high coolant activity level. Sympathetic responses were also recorded on the Loop 3 and Loop 4 instruments indicating a possible fuel element failure in Loop 1. The KE Reactor began shutdown operations immediately thereafter. The purpose of this report is to summarize the events pertinent to this reactor outage and to discuss the results obtained from coolant samples and a thermocouple wire sample… more
Date: February 28, 1961
Creator: Demmitt, T. F.
Partner: UNT Libraries Government Documents Department
open access

Development of container materials for LAMPRE applications

Description: Some 53 high-purity binary tantalum-base alloys were prepared and evaluated as candidate materials of construc tion for the Los Alamos Molten Plutonium Reactor Experiment. Preliminary data indicate that good resistance to attack by the fuels can be obtained by alloying tantalum. Alloys containing additions of rhenium and tungsten showed good corrosion resistance in polythermal (1352 to 1022 deg F) tilting-furnace exposures. Tantalum--yttrium alloys also displayed good corrosion resistance, even… more
Date: February 14, 1961
Creator: Drennen, D. C.; Langston, M. E.; Slunder, C. J.; Dunleavy, J. G. & Hall, A. M.
Partner: UNT Libraries Government Documents Department
open access

PHASE I REPORT OF DEVELOPMENT TECHNIQUES FOR POWER PRODUCTION FROM MIXED FISSION PRODUCTS

Description: An investigation was made into the various processes for the fixation of mixed fission products as solids in order to determine the extent they could be utilized as heat sources for thermoelectric generators. Generators of up to ten watts can be designed and built with state-of-art'' thermoelectric materials and mixed fission products soon to be available from the ldaho Falls calcination pilot plant. Mixed fission products from other processes and plants to be on stream'' in this decade will be… more
Date: February 18, 1961
Creator: Eaton, D.
Partner: UNT Libraries Government Documents Department
open access

Mound Laboratory Monthly Progress Report for February 1961

Description: A survey and re-evaluation of previous work on polyurethane and polyurethane--epoxy copolymer systems was initiated to determine which phases are more productive than others. The effects of varying excess polyol content were studied. Work was carried out to define the amounts of butamediol that the system Adiprene L-213-ferric acetyl acetonate can tolerate and still be thoroughly cured. An experimental diallyl phthalate formulation was made and tested. A survey is being made of potential source… more
Date: February 28, 1961
Creator: Eichelberger, J. F.
Partner: UNT Libraries Government Documents Department
open access

The Boron-Carbon System. Quarterly Report No. 3, November 1, 1960-January 31, 1961

Description: A definitive investigation of the boron-carbon equilibrium system is being made by x-ray diffraction, metallographic, and thermal analytical techniques. On the basis of metallogaphic and x-ray-diffraction studies it is concluded that boron carbide has a range of solubility from approximately 10 to 20 at.% carbon at 1500 to 2000 deg C. The melting point of the carbide-graphite eutectic was established as 2325 to 2350 deg C. No reversible allotropy of the beta -rhombohedral structure was observed… more
Date: February 1, 1961
Creator: Elliott, R. P.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen