Search Results

open access

Investigation in the 7-by-10 Foot Wind Tunnel of Ducts for Cooling Radiators within an Airplane Wing

Description: Report presents the results of an investigation made in the NACA 7 by 10-foot wind tunnel of a large-chord wing model with a duct to house a simulated radiator suitable for a liquid-cooled engine. The duct was expanded to reduce the radiator losses, and the installation of the duct and radiator was made entirely within the wing to reduce form and interference drag. The tests were made using a two-dimensional-flow setup with a full-span duct and radiator. Section aerodynamic characteristics of t… more
Date: June 9, 1938
Creator: Harris, Thomas A. & Recant, Isidore G.
Partner: UNT Libraries Government Documents Department
open access

Column Strength of Tubes Elastically Restrained Against Rotation at the Ends

Description: Report presents the results of a study made of the effects of known end restraint on commercially available round and streamline tubing of chromium-molybdenum steel, duralumin, stainless steel, and heat-treated chromium-molybdenum steel; and a more accurate method than any previously available, but still a practical method, was developed for designing compression members in riveted or welded structures, particularly aircraft. Two hundred specimens were tested as short, medium-length, and long c… more
Date: September 9, 1937
Creator: Osgood, William R.
Partner: UNT Libraries Government Documents Department
open access

Combustion in a Bomb With a Fuel-Injection System

Description: "Fuel injected into a spherical bomb filled with air at a desired density and temperature could be ignited with a spark a few thousandths of a second after injection, an interval comparable with the ignition lag in fuel-injection engines. The effect of several variables on the extent and rate of combustion was investigated: time intervals between injection and ignition of fuel of 0.003 to 0.06 second and one of 5 minutes; initial air temperatures of 100 degrees C. to 250 degrees C.; initial air… more
Date: August 9, 1935
Creator: Cohn, Mildred & Spencer, Robert C.
Partner: UNT Libraries Government Documents Department
open access

The influence of tip shape on the wing load distribution as determined by flight tests

Description: "Pressure measurements were made in flight on the right upper wing of an M-3 airplane. The effects of tip plan form, washout, and transverse camber were investigated with eight tip forms in unyawed conditions through the range of positive lift coefficients from zero lift to the stall. The conclusion is that the tip plan form does not influence the span distribution of the coefficients of normal force and moment. It is shown inferentially that temperature, humidity, and the aging of the wood and… more
Date: June 9, 1934
Creator: Rhode, Richard V.
Partner: UNT Libraries Government Documents Department
open access

Distribution and Regularity of Injection From a Multicylinder Fuel-Injection Pump

Description: This report presents the results of performance test conducted on a six-cylinder commercial fuel-injection pump that was adjusted to give uniform fuel distribution among the cylinders at a throttle setting of 0.00038 pound per injection and a pump speed of 750 revolutions per minute. The throttle setting and pump speed were then varied through the operating range to determine the uniformity of distribution and regularity of injection.
Date: April 9, 1935
Creator: Rothrock, A. M. & Marsh, E. T.
Partner: UNT Libraries Government Documents Department
open access

The N.A.C.A. Tank: A High-Speed Towing Basin for Testing Models of Seaplane Floats

Description: "This report describes the high-speed model towing basin of the National Advisory Committee for Aeronautics, usually referred to as the NACA Tank. The purpose of this piece of equipment is to enable the Committee to provide information and data regarding the performance of seaplanes on the water analogous to the information furnished concerning the performance of airplanes in the air" (p. 535).
Date: June 9, 1933
Creator: Truscott, Starr
Partner: UNT Libraries Government Documents Department
open access

The drag of airplane wheels, wheel fairings, and landing gears - 1

Description: This report presents the results of tests made in the 7-by 10-foot wind tunnel and in the 20-foot tunnel of the National Advisory Committee for Aeronautics to determine the drag of a number of airplane wheels, wheel fairings, and landing gears designed or selected for an airplane of 3,000 pounds gross weight. All tests were made on full-size models; those in the 7-by 10-foot tunnel were made at air speeds up to 80 miles per hour and those in the 20-foot tunnel were made at air speeds up to 100 … more
Date: February 9, 1934
Creator: Herrnstein, William H., Jr. & Biermann, David
Partner: UNT Libraries Government Documents Department
open access

The Theory of Wind-Tunnel Wall Interference

Description: This report outlines the development of a general theory for the calculation of the effect of the boundaries of the air stream on the flow past an airfoil. Analytical treatments are given for tunnels with horizontal boundaries only, with vertical boundaries only, and with a bottom boundary only. Formulas are developed for the tunnel wall interference in each case for an airfoil located at the center of the tunnel. The correction is given as a function of the width to height ratio of the tunnel.
Date: October 9, 1931
Creator: Theodorsen, Theodore
Partner: UNT Libraries Government Documents Department
open access

Present Status of Aircraft Instruments

Description: This report gives a brief description of the present state of development and of the performance characteristics of instruments included in the following group: speed instruments, altitude instruments, navigation instruments, power-plant instruments, oxygen instruments, instruments for aerial photography, fog-flying instruments, general problems, summary of instrument and research problems. The items considered under performance include sensitivity, scale errors, effects of temperature and pres… more
Date: October 9, 1930
Creator: Subcommittee on Instruments
Partner: UNT Libraries Government Documents Department
open access

The vertical wind tunnel of the National Advisory Committee for Aeronautics

Description: "The vertical open-throat wind tunnel of the National Advisory Committee for Aeronautics is described in this report. The tunnel was built mainly for studying the spinning characteristics of airplane models, but may be used as well for the usual types of wind-tunnel tests. A special spinning balance is being developed to measure the desired forces and moments with the model simulating the spin of an airplane. Satisfactory air flow has been attained with a velocity that is uniform over the jet t… more
Date: February 9, 1931
Creator: Wenzinger, Carl J. & Harris, Thomas A.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen