Search Results

open access

Local Effects of Biased Electrodes in the Divertor of NSTX

Description: The goal of this paper is to characterize the effects of small non-axisymmetric divertor plate electrodes on the local scrape-off layer plasma. Four small rectangular electrodes were installed into the outer divertor plates of NSTX. When the electrodes were located near the outer divertor strike point and biased positively, there was an increase in the nearby probe currents and probe potentials and an increase in the LiI light emission at the large major radius end of these electrodes. When an electrode located farther outward from the outer divertor strike point was biased positively, there was sometimes a significant decrease in the LiI light emission at the small major radius end of this electrode, but there were no clear effects on the nearby probes. No non-local effects were observed with the biasing of these electrodes.
Date: May 7, 2012
Creator: : S. Zweben, M.D. Campanell, B.C. Lyons, R.J. Maqueda, Y. Raitses, A.L. Roquemore and F. Scotti
Partner: UNT Libraries Government Documents Department
open access

GLASS FORMULATION TESTING TO INCREASE SULFATE INCORPORATION - Final Report VSL-04R4960-1, Rev 0, 2/28/05, Vitreous State Laboratory, The Catholic University of American, Washington, D.C.

Description: About 50 million gallons of high-level mixed waste is currently in storage in underground tanks at The United States Department of Energy's (DOE's) Hanford site in the State of Washington. The Hanford Tank Waste Treatment and Immobilization Plant (WTP) will provide DOE's Office of River Protection (ORP) with a means of treating this waste by vitrification for subsequent disposal. The tank waste will be separated into low- and high-activity fractions, which will then be vitrified respectively into Immobilized Low Activity Waste (ILAW) and Immobilized High Level Waste (IHLW) products. The ILAW product will be disposed of in an engineered facility on the Hanford site while the IHLW product will be directed to the national deep geological disposal facility for high-level nuclear waste. The ILAW and IHLW products must meet a variety of requirements with respect to protection of the environment before they can be accepted for disposal. The Office of River Protection is currently examining options to optimize the Low Activity Waste (LAW) facility and the LAW glass waste form. One option under evaluation is to enhance the waste processing rate of the vitrification plant currently under construction. It is likely that the capacity of the LAW vitrification plant can be increased incrementally by implementation of a variety of low-risk, high-probability changes, either separately or in combination. These changes include: (1) Operating at the higher processing rates demonstrated at the LAW Pilot Melter; (2) Increasing the glass pool surface area within the existing external melter envelope; (3) Increasing plant availability; (4) Increasing the glass waste loading; (5) Removing sulfate from the LAW stream; (6) Operating the melter at slightly higher temperature; (7) Installing the third LAW melter into the WTP plant; and (8) Other smaller impact changes. The melter tests described in this report utilized blended feed (glass formers plus …
Date: February 7, 2012
Creator: AA, KRUGER & KS, MATLACK
Partner: UNT Libraries Government Documents Department
open access

SMALL-SCALE MELTER TESTING WITH LAW SIMULANTS TO ASSESS THE IMPACT OF HIGHER TEMPERATURE MELTER OPERATIONS - Final Report, VSL-04R49801-1, Rev. 0, 2/13/03, Vitreous State Laboratory, The Catholic University of America, Washington, D.C.

Description: About 50 million gallons of high-level mixed waste is currently in storage in underground tanks at The United States Department of Energy's (DOE's) Hanford site in the State of Washington. The Hanford Tank Waste Treatment and Immobilization Plant (WTP) will provide DOE's Office of River Protection (ORP) with a means of treating this waste by vitrification for subsequent disposal. The tank waste will be separated into low- and high-activity fractions, which will then be vitrified respectively into Immobilized Low Activity Waste (ILAW) and Immobilized High Level Waste (IHLW) products. The ILAW product will be disposed of in an engineered facility on the Hanford site while the IHL W product will be directed to the national deep geological disposal facility for high-level nuclear waste. The ILAW and IHLW products must meet a variety of requirements with respect to protection of the environment before they can be accepted for disposal. The Office of River Protection is currently examining options to optimize the Low Activity Waste (LAW) facility and the LAW glass waste form. One option under evaluation is to enhance the waste processing rate of the vitrification plant currently under construction. It is likely that the capacity of the LAW vitrification plant can be increased incrementally by implementation of a variety of low-risk, high-probability changes, either separately or in combination. These changes include: (1) Operating at the higher processing rates demonstrated at the LAW Pilot Melter; (2) Increasing the glass pool surface area within the existing external melter envelope; (3) Increasing plant availability; (4) Increasing the glass waste loading; (5) Removing sulfate from the LAW stream; (6) Operating the melter at slightly higher temperature; (7) Installing the third LAW melter into the WTP plant; and (8) Other smaller impact changes. The tests describes in this report utilized blended feed (glass formers plus …
Date: February 7, 2012
Creator: AA, KRUGER & KS, MATLACK
Partner: UNT Libraries Government Documents Department
open access

Simulation of a Production Facility with an Automated Transport System

Description: A model was needed to assess material throughput and validate the conceptual design of a production facility, including equipment lists and layout. The initial desire was to use a commercially available discrete event simulation package. However, the available software was found to be too limited in capability. Database interface software was used to develop autonomous intelligent manufacturing workstations and material transporters. The initial Extend model used to assess material throughput and develop equipment lists for the preconceptual design effort was upgraded with software add-ons from Simulation Dynamics, Inc. (SDI). Use of the SDI database interface allowed the upgraded model to include: 1. a material mass balance at any level of detail required by the user, and 2. a transport system model that includes all transport system movements, time delays, and transfers between systems. This model will assist in evaluating transport system capacity, sensitive time delays in the system, and optimal operating strategies. An additional benefit of using the SDI database interface is dramatically improved run time performance. This allows significantly more runs to be completed to provide better statistics for overall plant performance. The model has all system and process parameters entered into sub-component accessible tables. All information for the manufactured items and process data is automatically generated and written to the database. The standard software is used for the movement of manufactured items between workstations, and for sequence and timing functions. Use of the database permits almost unlimited process control and data collection with an insignificant effect on run time.
Date: April 7, 2004
Creator: ABRAMCZYK, GLENN
Partner: UNT Libraries Government Documents Department
open access

Temperature tests of high frequency SLIFER oscillator, LEA73-2176. [For monitoring underground nuclear detonations at Nevada Test Site]

Description: SLIFER (Short Location Indication by Frequency of Electrical Resonance) systems measure stress wave velocity in solid or liquid materials. They monitor underground nuclear detonations at the Nevada Test Site (NTS). A shorted length of coaxial cable is a component in an oscillator's tank circuit. This sensor cable is inductive when less than one-fourth wavelength long at the oscillator's resonant frequency. The stress wave from a detonation crushes and shorts this sensor cable. As the short proceeds, inductance decreases and oscillator frequency increases. Later we convert frequency vs time to shock-front position vs time. Some doubt existed about the reliable operation of the oscillators in cold weather. Therefore these tests were conducted to check their reliability under several conditions: (1) at temperatures from -40/sup 0/ to 60/sup 0/C; (2) with three sensor cable lengths; (3) with sensor cables shorted or open at the far end; and (4) at two input power voltages. Results are presented.
Date: June 7, 1976
Creator: Aaron, Carl C., Jr.
Partner: UNT Libraries Government Documents Department
open access

Chamber and target technology development for inertial fusion energy

Description: Fusion chambers and high pulse-rate target systems for inertial fusion energy (IFE) must: regenerate chamber conditions suitable for target injection, laser propagation, and ignition at rates of 5 to 10 Hz; extract fusion energy at temperatures high enough for efficient conversion to electricity; breed tritium and fuel targets with minimum tritium inventory; manufacture targets at low cost; inject those targets with sufficient accuracy for high energy gain; assure adequate lifetime of the chamber and beam interface (final optics); minimize radioactive waste levels and annual volumes; and minimize radiation releases under normal operating and accident conditions. The primary goal of the US IFE program over the next four years (Phase I) is to develop the basis for a Proof-of-Performance-level driver and target chamber called the Integrated Research Experiment (IRE). The IRE will explore beam transport and focusing through prototypical chamber environment and will intercept surrogate targets at high pulse rep-rate. The IRE will not have enough driver energy to ignite targets, and it will be a non-nuclear facility. IRE options are being developed for both heavy ion and laser driven IFE. Fig. 1 shows that Phase I is prerequisite to an IRE, and the IRE plus NIF (Phase II) is prerequisite to a high-pulse rate. Engineering Test Facility and DEMO for IFE, leading to an attractive fusion power plant. This report deals with the Phase-I R&D needs for the chamber, driver/chamber interface (i.e., magnets for accelerators and optics for lasers), target fabrication, and target injection; it is meant to be part of a more comprehensive IFE development plan which will include driver technology and target design R&D. Because of limited R&D funds, especially in Phase I, it is not possible to address the critical issues for all possible chamber and target technology options for heavy ion or laser fusion. On the …
Date: April 7, 1999
Creator: Abdou, M.; Besenbruch, G.; Duke, J.; Forman, L.; Goodin, D.; Gulec, K. et al.
Partner: UNT Libraries Government Documents Department
open access

Electricity Restructuring Background: Public Utility Holding Company Act of 1935 (PUHCA)

Description: This report provides background information on PUHCA, including its history and impact. It also discusses how PUHCA reform fits into the current electric utility industry restructuring debate. This report will be updated as events warrant. For related information on electricity restructuring, see the CRS Electronic Briefing Book.
Date: January 7, 1999
Creator: Abel, Amy
Partner: UNT Libraries Government Documents Department
open access

Electricity: The Road Toward Restructuring

Description: The Public Utility Holding Company Act of 1935 (PUHCA) and the Federal Power Act (FPA) were enacted to eliminate unfair practices and other abuses by electricity and gas holding companies by requiring federal control and regulation of interstate public utility holding companies. Comprehensive energy legislation has passed the House and Senate. The House passed H.R. 6 on April 11, 2003. On July 31, 2003, the Senate suspended debate on S. 14, inserted the text of H.R. 4 (107th Congress) as a substitute, and passed H.R. 6. A conference agreement was reached November 17, 2003, and passed by the House the next day. H.R. 6 includes an electricity title that would, in part, repeal PUHCA, would prospectively repeal the mandatory purchase requirement under PURPA, and would create an electric reliability organization. On June 15, 2004, H.R. 4503, a comprehensive energy policy bill, passed the House.
Date: September 7, 2001
Creator: Abel, Amy & Parker, Larry
Partner: UNT Libraries Government Documents Department
open access

Interagency Geothermal Coordinating Council fifth annual report. Final draft

Description: Geothermal energy is the natural heat of the earth, and can be tapped as a clean, safe, economical alternative source of energy. Much of the geothermal energy resource is recoverable with current or near-current technology and could make a significant contribution both to increasing domestic energy supplies and to reducing the US dependence on imported oil. Geothermal energy can be used for electric power production, residential and commercial space heating and cooling, industrial process heat, and agricultural process applications. This report describes the progress for fiscal year 1980 (FY80) of the Federal Geothermal Program. It also summarizes the goals, strategy, and plans which form the basis for the FY81 and FY82 program activities and reflects the recent change in national policy affecting Federal research, development and demonstration programs. The Interagency Geothermal Coordinating Council (IGCC) believes that substantial progress can and will be made in the development of geothermal energy. The IGCC goals are: (1) reduce the institutional barriers so that geothermal projects can be on-line in one-half the current time; (2) make moderate temperature resources an economically competitive source of electricity; (3) remove the backlog of noncompetitive lease applications; (4) competitive lease all KGRA lands; and (5) cut the cost of hydrothermal technology by 25%.
Date: July 7, 1981
Creator: Abel, Fred H.
Partner: UNT Libraries Government Documents Department
open access

The H II Region of a Primordial Star

Description: The concordance model of cosmology and structure formation predicts the formation of isolated very massive stars at high redshifts in dark matter dominated halos of 10{sup 5} to 10{sup 6} Msun. These stars photo-ionize their host primordial molecular clouds, expelling all the baryons from their halos. When the stars die, a relic H II region is formed within which large amounts of molecular hydrogen form which will allow the gas to cool efficiently when gravity assembles it into larger dark matter halos. The filaments surrounding the first star hosting halo are largely shielded and provide the pathway for gas to stream into the halo when the star has died. We present the first fully three dimensional cosmological radiation hydrodynamical simulations that follow all these effects. A novel adaptive ray casting technique incorporates the time dependent radiative transfer around point sources. This approach is fast enough so that radiation transport, kinetic rate equations, and hydrodynamics are solved self-consistently. It retains the time derivative of the transfer equation and is explicitly photon conserving. This method is integrated with the cosmological adaptive mesh refinement code enzo, and runs on distributed and shared memory parallel architectures. Where applicable the three dimensional calculation not only confirm expectations from earlier one dimensional results but also illustrate the multi-fold hydrodynamic complexities of H II regions. In the absence of stellar winds the circumstellar environments of the first supernovae and putative early gamma-ray bursts will be of low density {approx}1 cm{sup -3}. Albeit marginally resolved, ionization front instabilities lead to cometary and elephant trunk like small scale structures reminiscent of nearby star forming regions.
Date: June 7, 2006
Creator: Abel, Tom; Wise, John H.; /KIPAC, Menlo Park; Bryan, Greg L. & /Columbia U., Astron. Astrophys.
Partner: UNT Libraries Government Documents Department
open access

Measurement of HOMs in the RHIC RF Cavities

Description: The authors present results of Higher Order Modes (HOMs) measurements in the RHIC accelerating (28 MHz system) and storage (197 MHz system) cavities. The power of the excited HOMs deposited into the HOM damper is measured and compared with an analytical calculation of the HOMs power. The quality factors (Q) are also measured and compared to previous measurements.
Date: January 7, 2009
Creator: Abreu,N.P. & Choi, E. M.
Partner: UNT Libraries Government Documents Department
open access

Comparison of flight performance of AN-F-58 and AN-F-32 fuels in J35 turbojet engine

Description: Report presenting a flight investigation to determine the comparative performance of AN-F-58 and AN-F-32 fuels in a 4000-pound-thrust turbojet engine. The fuels were equivalent over the range of conditions investigated. Results regarding corrected net thrust, corrected jet-fuel consumption, variation of corrected tail-pipe temperature, combustor blow-out speeds, and visual observations of the jet exhaust are provided.
Date: April 7, 1949
Creator: Acker, Loren W. & Kleinknecht, Kenneth S.
Partner: UNT Libraries Government Documents Department
open access

Top physics: measurement of the tt-bar production cross section in p anti-p collisions at s**(1/2) = 1.96 tev using lepton + jets events with secondary vertex b-tagging

Description: We present a measurement of the t{bar t} production cross section using events with one charged lepton and jets from p{bar p} collisions at a center-of-mass energy of 1.96TeV. In these events, heavy flavor quarks from top quark decay are identified with a secondary vertex tagging algorithm. From 162 pb{sup -1} of data collected by the Collider Detector at Fermilab, a total of 48 candidate events are selected, where 13.5 {+-} 1.8 events are expected from background contributions. We measure a t{bar t} production cross section of 5.6{sub -1.1}{sup _1.2}(stat.){sub -0.6}{sup +0.9}(syst.)pb.
Date: April 7, 2005
Creator: Acosta, D.
Partner: UNT Libraries Government Documents Department
open access

The Rheology of Concentrated Suspensions

Description: Research program on the rheological properties of flowing suspensions. The primary purpose of the research supported by this grant was to study the flow characteristics of concentrated suspensions of non-colloidal solid particles and thereby construct a comprehensive and robust theoretical framework for modeling such systems quantitatively. At first glance, this seemed like a modest goal, not difficult to achieve, given that such suspensions were viewed simply as Newtonian fluids with an effective viscosity equal to the product of the viscosity of the suspending fluid times a function of the particle volume fraction. But thanks to the research findings of the Principal Investigator and of his Associates, made possible by the steady and continuous support which the PI received from the DOE Office of Basic Energy Sciences, the subject is now seen to be more complicated and therefore much more interesting in that concentrated suspensions have been shown to exhibit fascinating and unique rheological properties of their own that have no counterpart in flowing Newtonian or even non-Newtonian (polymeric) fluids. In fact, it is generally acknowledged that, as the result of these investigations for which the PI received the 2001 National Medal of Science, our understanding of how suspensions behave under flow is far more detailed and comprehensive than was the case even as recently as a decade ago. Thus, given that the flow of suspensions plays a crucial role in many diverse physical processes, our work has had a major and lasting impact in a subject having both fundamental as well as practical importance.
Date: September 7, 2004
Creator: Acrivos, Andreas
Partner: UNT Libraries Government Documents Department
open access

Weatherization Assistance Program Technical Assistance Center

Description: The following is a synopsis of the major achievements attributed to the operation of the Weatherization Assistance Program Technical Assistance Center (WAPTAC) by the National Association for State Community Services Programs (NASCSP). During the past five years, the WAPTAC has developed into the premier source for information related to operating the Weatherization Assistance Program (WAP) at the state and local levels. The services provide through WAPTAC include both virtual technical support as well as hands-on training and instruction in classroom and in the field. The WAPTAC achieved several important milestones during its operation including the establishment of a national Weatherization Day now celebrated in most states, the implementation of a comprehensive Public Information Campaign (PIC) to raise the awareness of the Program among policy makers and the public, the training of more than 150 new state managers and staff as they assume their duties in state offices around the country, and the creation and support of a major virtual information source on the Internet being accessed by thousands of staff each month. The Weatherization Assistance Program Technical Assistance Center serves the Department of Energy's (DOE) Office of Weatherization and Intergovernmental Program as a valuable training and technical assistance resource for the network of 54 direct state grantees (50 states, District of Columbia and three Native American tribes) and the network of 900 local subgrantees (comprised of community action agencies, units of local government, and other non-profit organizations). The services provided through WAPTAC focus on standardizing and improving the daily management of the WAP. Staff continually identify policies changes and best practices to help the network improve its effectiveness and enhance the benefits of the Program for the customers who receive service and the federal and private investors. The operations of WAPTAC are separated into six distinct areas: (1) Orientation for …
Date: January 7, 2009
Creator: Adams, Robert
Partner: UNT Libraries Government Documents Department
open access

Confirmatory Survey Report for Portions of the Auxiliary Building Structural Surfaces and Turbine Building Embedded Piping, Rancho Seco Nuclear Generating Station, Herald, CA

Description: During the period of October 15 and 18, 2007, ORISE performed confirmatory radiological survey activities which included beta and gamma structural surface scans and beta activity direct measurements within the Auxiliary Building, beta or gamma scans within Turbine Building embedded piping, beta activity determinations within Turbine Building Drain 3-1-27, and gamma scans and the collection of a soil sample from the clay soils adjacent to the Lower Mixing Box.
Date: December 7, 2007
Creator: Adams, W. C.
Partner: UNT Libraries Government Documents Department
open access

Revised─Confirmatory Survey Report for Portions of the Auxiliary Building Structural Surfaces and Turbine Building Embedded Piping, Rancho Seco Nuclear Generating Station, Herald, California

Description: During the period of October 15 and 18, 2007, ORISE performed confirmatory radiological survey activities which included beta and gamma structural surface scans and beta activity direct measurements within the Auxiliary Building, beta or gamma scans within Turbine Building embedded piping, beta activity determinations within Turbine Building Drain 3-1-27, and gamma scans and the collection of a soil sample from the clay soils adjacent to the Lower Mixing Box.
Date: December 7, 2007
Creator: Adams, W. C.
Partner: UNT Libraries Government Documents Department
open access

Experimental Investigation of In Situ Cleanable HEPA Filters

Description: For the past several years studies have been conducted to investigate the use of innovative, alternative approaches to conventional disposable high efficiency particulate air filters.
Date: January 7, 1999
Creator: Adamson, D.J.
Partner: UNT Libraries Government Documents Department
open access

Iran: Regional Perspectives and U.S. Policy

Description: This report provides a description of Iran's neighbors' policies and interests, options for Congressional consideration, and an analysis of potential regional implications
Date: October 7, 2009
Creator: Addis, Casey L.; Blanchard, Christopher M.; Katzman, Kenneth; Migdalovitz, Carol; Nichol, Jim; Sharp, Jeremy M. et al.
Partner: UNT Libraries Government Documents Department
open access

Raman Spectroscopy Characterization of amorphous carbon coatings for computer hard disks

Description: Amorphous carbon films are used as protective coatings on magnetic media to protect the magnetic layer from wear and abrasion caused by the read/write head during hard disk drive start-up and operation. A key requirement in increasing the storage capacity and reliability of hard-disk drives is improving the performance of these coatings. This cooperative agreement used optical characterization techniques developed at LBNL to study thin-film hard disk media produced by Seagate Technology, major US hard drive manufacturer. The chief scientific goal was relating quantitatively the results of the optical characterization to the underlying chemical structure of the overcoat. In a collaboration with Seagate, LBNL, and Cambridge University, optical and electron-based characterization were used to evaluate the chemical structure of overcoats. The sp3 fraction of the sputtered amorphous carbon films was measured quantitatively for the first time and related to the optical spectroscopy results. This work and other selected aspects of the research performed under the agreement were presented at technical meetings and published in the open literature. The chief technical goal was designing manufacturing processes for the protective carbon overcoat for use in new generations of Seagate disk drives. To this end, joint research carried out under this agreement enabled Seagate to speed development of new coatings which are currently being used in the production of disk media in Seagate's disk-media manufacturing plants in Fremont, CA.
Date: May 7, 1998
Creator: Ager III, Joel W.
Partner: UNT Libraries Government Documents Department
open access

Stability and Regeneration of Catalysts for the Destruction of Tars from Bio-mass Black Liquor Gasification

Description: The goal of this project was to develop catalytic materials and processes that would be effective in the destruction of tars formed during the gasification of black liquor and biomass. We report here the significant results obtained at the conclusion of this two year project.
Date: September 7, 2004
Creator: Agrawal, Pradeep
Partner: UNT Libraries Government Documents Department
Back to Top of Screen