13 Matching Results

Search Results

Advanced search parameters have been applied.
in subjects: "Loading"  
Results: 1 - 13
open access

Dust Studies in DIII-D Tokamak

Description: Studies of submicron dust using Mie scattering from Nd:YAG lasers and video data of micron to sub-millimeter sized dust on DIII-D tokamak have provided the first data of dust sources and transport during tokamak discharges. During normal operation on DIII-D dust observation rates are low, a few events per discharge or less. The net carbon content of the dust corresponds to a carbon atom density a few orders of magnitude below the core impurity density. Statistical analysis of Mie data collected… more
Date: April 15, 2008
Creator: Rudakov, D. L.; West, W. P.; Groth, M.; Yu, J. H.; Boedo, J. A.; Bray, B. D. et al.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

CTR plasma engineering studies. Progress report, 1 September 1975--30 Jun 1976

Description: During the past contract period, this research has been concerned with three principal tasks, namely: (1) Fusion-product studies. The primary objective of this work is to study potential effects (e.g. instabilities, changes in heating profile and wall loadings, etc.) caused by high-energy fusion products. A second objective is to establish the operating conditions and measurements required for use of D-/sup 3/He in early experiments such as TFTR to simulate D-T burns. (2) Mirror system studies.… more
Date: April 15, 1976
Creator: Miley, G. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Determination of Fissile Loadings onto Monosodium Titanate (MST) under Conditions Relevant to the Actinide Removal Process Facility

Description: This report describes the results of an experimental study to measure the sorption of fissile actinides on monosodium titanate (MST) at conditions relevant to operation of the Actinide Removal Process (ARP). The study examined the effect of a single contact of a large volume of radionuclide-spiked simulant solution with a small mass of MST. The volume of simulant to MST (8.5 L to 0.2 g of MST solids) was designed to mimic the maximum phase ratio that occurs between the multiple contacts of MST … more
Date: November 15, 2005
Creator: Peters, T
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Tritium Loading of Pinellas U-Bed No. 874

Description: The DOE-Richland Office has requested WSRC to supply PNNL with a Pinellas U-bed loaded with tritium for permeation experiments. It is desired to have less than 1000 Ci tritium in the bed to allow shipping without excessive packaging requirements. Pinellas U-Bed No. 874 was loaded with approximately 955 Ci of 98 percent purity tritium on the ETM manifold in the Materials Test Facility in Building 232-H.
Date: September 15, 1999
Creator: Shanahan, K. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
captions transcript

[News Clip: 49th]

Description: Video footage from the WBAP-TV television station in Fort Worth, Texas, covering a news story about the 49th Armored Division of the US Army National Guard preparing men and equipment for Fort Polk, Louisiana.
Date: October 15, 1961
Duration: 3 minutes 31 seconds
Creator: WBAP-TV (Television station : Fort Worth, Tex.)
Item Type: Refine your search to only Video
Location: 32.671669 -97.354078
Partner: UNT Libraries Special Collections
open access

Safety evaluation for packaging (onsite) for cesium chloride capsules with type W overpacks

Description: This Safety Evaluation for Packaging (SEP) documents the evaluation of a new basket design and overpacked cesium chloride capsule payload for the Beneficial Uses Shipping System (BUSS) Cask in accordance with the onsite transportation requirements of the Hazardous Material Packaging and Shipping manual, WHC-CM-2-14. This design supports the one-time onsite shipment of 16 cesium chloride capsules with Type W overpacks from the 324 Building to the 224T Building at the Waste Encapsulation and Stor… more
Date: September 15, 1997
Creator: McCoy, J. C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Flibe blanket concept for transmuting transuranic elements and long lived fission products.

Description: A Molten salt (Flibe) fusion blanket concept has been developed to solve the disposition problems of the spent nuclear fuel and the transuranic elements. This blanket concept can achieve the top rated solution, the complete elimination of the transuranic elements and the long-lived fission products. Small driven fusion devices with low neutron wall loading and low neutron fluence can perform this function. A 344-MW integrated fusion power from D-T plasmas for thirty years with an availability f… more
Date: November 15, 2000
Creator: Gohar, Y.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Vitrification of SRP Waste by a Slurry-fed Ceramic Melter

Description: Savannah River Laboratory (SRL) is testing the slurry feeding of a ceramic melter as a possible method to vitrify its high-level radioactive waste. Feeding a liquid slurry requires simpler and less expensive equipment than feeding a powdered calcine. Experiments have progressed from manual feeding, to a semiautomatic system, to the present slurry-feed system, which is completely automatic. All experiments to date indicate that slurry feeding is a promising way of vitrifying waste. No safety haz… more
Date: March 15, 2001
Creator: Wicks, G. G.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Shot loading trainer analysis

Description: This document presents the results from the analysis of the shot loading trainer (SLT). This device will be used to test the procedure for installing shot into the annulus of the Project W-320 shipping container. To ensure that the shot is installed uniformly around the container, vibrators will be used to settle the shot. The SLT was analyzed to ensure that it would not jeopardize worker safety during operation. The results from the static analysis of the SLT under deadweight and vibrator oper… more
Date: February 15, 1995
Creator: Peterson, T.K.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Loads on an External Store Adjacent to a 45 Degree Sweptback Wing at Mach Numbers From 0.70 to 1.96, Including an Evaluation of Techniques Used

Description: "Aerodynamic forces and moments have been obtained in the Langley 9- by 12-inch blowdown tunnel on an external store and on a 45 degree swept-back wing-body combination measured separately at Mach numbers from 0.70 to 1.96. The wing was cantilevered and had an aspect ratio of 4.0; the store was independently sting-mounted and had a Douglas Aircraft Co. (DAC) store shape. The angle of attack range was from -3 degrees to 12 degrees and the Reynolds number (based on wing mean aerodynamic chord) va… more
Date: November 15, 1955
Creator: Guy, Lawrence D. & Hadaway, William M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Relative loading on biplane wings

Description: Recent improvements in stress analysis methods have made it necessary to revise and to extend the loading curves to cover all conditions of flight. This report is concerned with a study of existing biplane data by combining the experimental and theoretical data to derive a series of curves from which the lift curves of the individual wings of a biplane may be obtained.
Date: February 15, 1933
Creator: Diehl, Walter S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Plutonium Immobilization Project System Design Description for Can Loading System

Description: The purpose of this System Design Description (SDD) is to specify the system and component functions and requirements for the Can Loading System and provide a complete description of the system (design features, boundaries, and interfaces), principles of operation (including upsets and recovery), and the system maintenance approach. The Plutonium Immobilization Project (PIP) will immobilize up to 13 metric tons (MT) of U.S. surplus weapons usable plutonium materials.
Date: February 15, 2001
Creator: Kriikku, E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen