Search Results

Advanced search parameters have been applied.
open access

Low cost Czochralski crystal growing technology: near term implementation of the flat plate photovoltaic cost reduction of the Low Cost Solar Array Project. Fifth quarterly progress report, April 1-June 30, 1980

Description: During this reporting period, the primary activity has been to develop microprocessor control of the crystal growth process and to develop and demonstrate the accelerated crystal growth program. Accelerated recharging of the quartz crucible by the RF melting of polycrystalline silicon feed rods was deemphasized by JPL primarily due to the unavailability of suitable quality feed rods at an effective economical price. The development of the cold crucible program as an alternative method of crucib… more
Date: January 1, 1980
Creator: Roberts, E. G.
Partner: UNT Libraries Government Documents Department
open access

Chemical Technology Division, Unit Operations Section Monthly Progress Report, February 1962

Description: In the operation of 6-in.-dia. foam-liquid columns, increase in either the liquid flow or foam flow caused increased channeling with increased HTU. Flooding values for the Immi mixer-settler were obtalned using the amine extraction final cycle Pu flowsheet. Two tests of the addltlon of uranyl nitrate to a thoria sol were made, one of which gave a good product and the other a product which disintegrated during calcination. Material balances for 22 waste calcination runs are summarized. (auth)
Date: August 23, 1962
Creator: Whatley, M. E.; Haas, P. A.; Horton, R. W.; Ryon, A. D.; Suddath, J. C. & Watson, C. D.
Partner: UNT Libraries Government Documents Department
open access

Chemical Technology Division, Unit Operations Section Monthly Progress Report, June 1961

Description: An interfacial viseometer was built for use in an interfacial phenomena study. Installation of a 6-in.-ID foam separation column system was completed. The dispersiondrying-sintering characteristics of six low-nitrate batches of thoria sol material were studied. The average effective porosity of the CuO pellets used for reactor helium purification was determined to be 0.0545 for H/ sub 2/ transport and 0.0526 for CO transport. In continuous Zirflex dissolution studies, no H/sub 2/O/sub 2/ decomp… more
Date: January 23, 1962
Creator: Whatley, M. E.; Haas, P. A.; Horton, R. W.; Ryon, A. D.; Suddath, J. C. & Watson, C. D.
Partner: UNT Libraries Government Documents Department
open access

Recording Equipment for Internal Friction Measurements

Description: An apparatus was developed for recording internal friction data in such a manner as to circumvent many of the laborious and time-consuming observations and calculations usually associated with these measurements. An optical lever is used and the passage of the beam across the scale is detected by photoconductive cells. The cells are strategically located so that, when their signals are fed through a multichannel switching circuit to the pens of an operation recorder, a plot of the logarithm of … more
Date: October 31, 1961
Creator: Stephenson, R. L. & McCoy, H. E. Jr.
Partner: UNT Libraries Government Documents Department
open access

Solar heating and domestic hot water system installed at Kansas City, Fire Station, Kansas City, Missouri. Final report

Description: This document is the final report of the solar energy heating and hot water system installed at the Kansas City Fire Station, Number 24, 2309 Hardesty Street, Kansas City, Missouri. The solar system was designed to provide 47 percent of the space heating, 8800 square feet area and 75 percent of the domestic hot water (DHW) load. The solar system consists of 2808 square feet of Solaron, model 2001, air, flat plate collector subsystem, a concrete box storage subsystem which contains 1428 cubic fe… more
Date: July 1980
Partner: UNT Libraries Government Documents Department
open access

Liquefaction of coals using ultra-fine particle, unsupported catalysts: In situ generation by rapid expansion of supercritical fluid solutions

Description: The program objective is to generate ultra-fine catalyst particles (20 to 400 {Angstrom} in size) and quantify their potential for improving coal dissolution in the solubilization stage of two-stage catalytic-catalytic liquefaction systems. In the first quarterly report for this program the concept behind our approach was detailed, the structure of the program was presented, key technical issues were identified, preliminary designs were outlined, and technical progress was discussed. All progre… more
Date: September 1, 1991
Partner: UNT Libraries Government Documents Department
open access

Solar hot water demonstration project at Red Star Industrial Laundry, Fresno, California

Description: The Final Report of the Solar Hot Water System located at the Red Star Industrial Laundry, 3333 Sabre Avenue, Fresno, California, is presented. The system was designed as an integrated wastewater heat recovery and solar preheating system to supply a part of the hot water requirements. It was estimated that the natural gas demand for hot water heating could be reduced by 56 percent (44 percent heat reclamation and 12 percent solar). The system consists of a 16,500 gallon tube-and-shell wastewate… more
Date: July 1, 1980
Partner: UNT Libraries Government Documents Department
open access

Recovery of plutonium and americium from chloride salt wastes by solvent extraction

Description: Plutonium and americium can be recovered from aqueous waste solutions containing a mixture of HCl and chloride salt wastes by the coupling of two solvent extraction systems: tributyl phosphate (TBP) in tetrachloroethylene (TCE) and octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) in TCE. In the flowsheet developed, the salt wastes are dissolved in HCl, the Pu(III) is oxidized to the IV state with NaClO/sub 2/ and recovered in the TBP-TCE cycle, and the Am is then removed from t… more
Date: January 1, 1987
Creator: Reichley-Yinger, L. & Vandegrift, G.F.
Partner: UNT Libraries Government Documents Department
open access

A Study of the Kinetic and Mechanical Properties of a Stabilized Beta Phase Plutonium Alloy

Description: The elements Sn, Mg, Ti, Zr, Hf, Si, Cd, and U were alloyed with plutonium to determine their effect on stabilization of the beta phase. Zirconium was found to be the ' most effective. Kinetic studies were conducted on Pu-Zr alloys having 0.24, 0.65, and 1.7 at.% Zr contents. The beta to alpha transformation in the Pu-Zr alloys was somewhat similar to that in unalloyed plutonium. The main difference being that time, temperature, transformation curves of the alloys were shifted to the right as t… more
Date: January 1, 1962
Creator: Taylor, J. M.
Partner: UNT Libraries Government Documents Department
open access

Digital SLIFER Recorder, Model A. [Underground nuclear explosions]

Description: The Digital SLIFER Recorder (DSR) is an instrument that records a time-varying frequency signal in the range from 700 kHz to 1500 kHz with an amplitude greater than 200 mV. This signal is referenced to an input fiducial marker, and recording is initiated by an increase in the frequency of the signal. The primary purpose of this instrument is to record data from the SLIFER system. The DSR records 512 samples after the record trigger signal, with a sample interval of 50 ..mu..s (for a total recor… more
Date: November 1, 1977
Creator: Breding, D.R.; Fogel, D.; Loukota, J.J.; Worthen, G.S. & Watterberg, J.P.
Partner: UNT Libraries Government Documents Department
open access

LITERATURE SEARCH ON LEAD-BISMUTH ALLOYS

Description: BS>The use of a lead-bismuth alloy as a coolant in the removal of heat from power-generating nuclear reactors was considered with the possibility that its ternary alloy with uranium or plutonium might be of use in a reactor of the circulating-liquid-fuel type. Information collected from the literature covering phase-equilibrium studies, physicalproperty data, and reactivity of this alloy toward other substances is presented. (auth)
Date: February 14, 1950
Creator: Lee, M.E.
Partner: UNT Libraries Government Documents Department
open access

(The relationship between microstructure and magnetic properties in high-energy permanent magnets characterized by polytwinned structures)

Description: This report summarizes the results of a study of the relationship between microstructure and magnetic properties in a unique genre of ferromagnetic material characterized by a polysynthetically twinned structure which arises during solid state transformation. These results stem from the work over a period of approximately 27 months of a nominal 3 year grant period. The report also contains a proposal to extend the research project for an additional 3 years. The polytwinned structures produce an… more
Date: January 1, 1992
Partner: UNT Libraries Government Documents Department
open access

Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process. Quarterly progress report, October-December 1979

Description: This program consists of the engineering design, fabrication, assembly, operation, economic analysis, and process support R and D for an Experimental Process System Development Unit (EPSDU). EPSDU equipment specification, vendor development, and evaluation of quotations represent a significant effort which will permit the start of ordering EPSDU equipment during the next quarter. Initial mini-burner test results are encouraging. It appears that a fairly simple and cost-effective waste treatment… more
Date: January 1, 1979
Partner: UNT Libraries Government Documents Department
open access

Feasibility demonstration of the Sperry down-well pumping system. Final report

Description: Advantages of down-well pumping (vs. free-flowing) of geothermal hot-water wells are presented, and criteria for such a system are discussed. The main body of the report is presented under the following section headings: the Sperry down-well pumping system; field test program; field operations; test results; and, conclusions and recommendations. The appendix includes a summary of boiler heat transfer and pressure drop calculations. (JGB)
Date: May 1, 1977
Partner: UNT Libraries Government Documents Department
open access

Chemical Technology Division, Unit Operations Section Monthly Progress Report, May 1961

Description: The experimental results on the oxidation of H from a He stream with CuO pellets were very close to the predicted behavior based on the mathematical model. Experimental measurements of uranyl sulfate loading rates on chloride equilibrated resin showed little variation with solution concentrations. A tentative flowsbeet was proposed for cost analysis of processing a Pebble Bed Reactor. A U-Zr plate was dissolved in nitrate-free Zirflex solution. An authentic TRIGA prototype was processed in engi… more
Date: December 26, 1961
Creator: Whatley, M. E.; Haas, P. A.; Horton, R. W.; Ryon, A. D.; Suddath, J. C. & Watson, C. D.
Partner: UNT Libraries Government Documents Department
open access

Evaluation of Wire Scanner for SM-1

Description: Preliminary design concepts are presented for a wire scanner for experimentally evaluating spatial variations of neutron flux in the SM-l reactor core. Results of a literature search and determination of optimum criteria for flux mapping the core in minimum time dictated requirements for design concepts and specifications. The utility of both manually instrumented and automatically instrumented wire scanners was analyzed with respect to rapidity of measurement, selectivity of detector location,… more
Date: November 22, 1961
Creator: Kemp, S. N.
Partner: UNT Libraries Government Documents Department
open access

Evaluation of Subsize Izod Specimen Designs for Determining the Notch Toughness of Zircaloy-2

Description: Correlations were made on Zircaloy-2 Izod impact data and Charpy-V drop- weight data. Subsize Izod impact specimens of various geometries and notch configurations and standard ASTM Charpy-V specimens were prepared from bar and plate stock and tested. Drop-weight tests were also conducted and the NDT (nil- ductility transition) temperature was determined for 1/2 in. Zircaloy-2 plate. Results show that the impact properties of Zircaloy-2 are sensitive to hydrogen concentration, specimen and notch… more
Date: October 1, 1962
Creator: Prislinger, J. J.
Partner: UNT Libraries Government Documents Department
open access

Effects of Temperature on Mechanical Properties of Normal Uranium Dingot

Description: Fatigue properties of normal uranium dingot for rotating beam specimens between 150 and 600 deg C are shown as S-N diagrams and are also given by an empirical equation of the form S = bN/sub m/, where S is the stress, N the number of cycIes, and b and m temperature dependent parameters. Tensile properties for temperatures ranging from 30 to 700 deg C are presented in tabular form and as stress-strain diagrams. All of the properties were found to decrease in value with increasing temperature exc… more
Date: January 1, 1962
Creator: Pederson, K. & Murphy, G.
Partner: UNT Libraries Government Documents Department
open access

Fifth in situ vitrification engineering-scale test of simulated INEL buried waste sites

Description: In September 1990, an engineering-scale in situ vitrification (ISV) test was conducted on sealed canisters containing a combined mixture of buried waste materials expected to be present at the Idaho National Engineering Laboratory (INEL) Subsurface Disposal Area (SDA). The test was part of a Pacific Northwest Laboratory (PNL) program to assist INEL in treatability studies of the potential application of ISV to mixed transuranic wastes at the INEL SDA. The purpose of this test was to determine t… more
Date: June 1, 1992
Creator: Bergsman, T.M.; Shade, J.W. (Pacific Northwest Lab., Richland, WA (United States)) & Farnsworth, R.K. (EG and G Idaho, Inc., Idaho Falls, ID (United States))
Partner: UNT Libraries Government Documents Department
open access

Liquid waste handling facilities for a conceptual LWR spent fuel reprocessing complex

Description: The waste evaporator systems and the methods for evaporating the liquid wastes of various radioactivity levels are discussed. After the liquid wastes are evaporated and nitric acid is recovered the high-level liquid waste is incorporated into borosilicate glass and the intermediate-level liquid waste into concrete for final disposal. (LK)
Date: January 1, 1978
Creator: Witt, D.C. & Bradley, R.F.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen